(a)

Purpose. The purpose of the R-9 Single Family Residential zoning district shall be to designate and establish areas within the City of Callaway which are deemed to be uniquely appropriate for the development and maintenance of a low density residential neighborhood with ample open space and outdoor living areas; and to designate those uses and services deemed appropriate to ensure a proper and desirable low density residential environment.

(b)

Permitted use. Land and buildings within a R-9 Single Family Residential zoning district shall be used only for the following purposes:

(1)

Dwelling, single family.

(2)

Building or use owned or operated by the City of Callaway, including schools, libraries, museums, art galleries, community buildings, parks, playgrounds, picnic areas, swimming pools or other recreational uses; or utility structures or stations owned or operated by the City of Callaway, including transmission lines, poles, guywires, pipelines as are necessary for the installation and maintenance of utility service.

(c)

Uses requiring special approval. Land and buildings within a R-9 Single Family Residential zoning district may be used for those uses permitted pursuant to Section 15.515(c), upon review and approval of the City Commission and in accordance with Section 15.630, Callaway Code of Ordinances.

(d)

Bulk Regulations - The following are the minimum bulk regulation requirements:

(1)

Required Lot Size - 9,000 square feet

(2)

Required Set Backs (to be measured from the building not the overhang):

a.

Front - 25 feet

b.

Side - 5 feet

c.

Rear - 15 feet, 20 feet if abutting a street

d.

Corner - 10 feet on the side abutting the street

(3)

Floor Area Ratio - 40%

(4)

Impervious Surface Ratio - 50%

(5)

Maximum Building Height - 50 feet