Lewisboro City Zoning Code
ARTICLE II
Establishment of Districts
§ 220-3 Designation of districts.
The Town of Lewisboro is hereby divided into the following classes of districts:
R-4A | One-Family Residence District |
R-2A | One-Family Residence District |
R-1A | One-Family Residence District |
R-1/2A | One-Family Residence District |
R-1/4A | One-Family Residence District |
R-2F-10 | Two-Family Residence District |
R-2F-7.5 | Two-Family Residence District |
R-MF | Multifamily Residence District |
CC-20 | Campus Commercial District |
SU | Service Utility District |
RB | Retail Business District |
GB | General Business District |
SC | Special Character Overlay District |
§ 220-4 Zoning Map.
Said districts are bounded and defined as shown on the map titled "Zoning Map of the Town of Lewisboro, New York," with all explanatory matter thereon, which is hereby made a part of this chapter.[1]
[1]
Editor's Note: The Zoning Map is included at the end of this chapter.
§ 220-5 Interpretation of district boundaries.
Where uncertainty exists as to the location of any boundary shown on the Zoning Map, the following rules shall apply:
A.
District boundary lines are intended to follow lot lines or the center line of streets, rights-of-way or watercourses, or be parallel or perpendicular thereto, unless such district boundary lines are indicated by dimensions shown on the Zoning Map.
B.
Where district boundary lines divide a lot or unsubdivided property, the location of any such boundary, if not indicated by dimensions, shall be determined by the use of the map scale appearing thereon.
C.
If the district classification of any land is in question, it shall be deemed to be in the most restrictive adjoining district.
§ 220-6 Lots in two or more districts.
Where a lot lies in two or more zoning districts or municipalities, any building or land use established thereon shall comply with the regulations of the district in which said building or use is located, except that the minimum lot size shall be as required in the most restrictive district in which the use is located.
§ 220-7 Order of restrictiveness.
For purposes of these regulations, where districts are referred to as "more restrictive" or "less restrictive," the designation shall refer to the order in which the districts are set forth in § 220-3, the first named being the most restrictive.