The Mayor of the Borough of North Plainfield or the Mayor's designee;

A member of the Borough administration appointed by the Mayor with Borough Council consent;

A member of the Economic Development Committee to be appointed by the Mayor with Borough Council consent; and,

Two members, each being either a resident of the Borough and/or a member of the building trades and/or person(s) having knowledge of the building and/or construction industry, appointed by the Mayor with Borough Council consent.

Additionally, the ADRB may consult with professionals, such as architects, planners or other professionals as necessary.

The terms of ADRB members shall be for one year and until a successor is qualified and appointed.

Massing. A building shall not be permitted to have a total linear measurement greater than 150 feet in length along any wall, roof or footprint plane without offset. Building wall offsets, including both projections and recesses, shall be provided along any building wall measuring greater than 50 feet in length in order to provide architectural interest and variety to the massing of a building or structure and relieve the negative visual effect of a straight, linear wall constructed without offset. The total measurement of such offsets shall equal a minimum of 10% of the building wall length. The maximum spacing between such offsets shall be 40 feet. The minimum projection or depth of any individual offset shall not be less than two feet and not greater than 2 1/2 feet. Roofline offsets shall be provided along any roof measuring longer than 75 feet in length in order to provide architectural interest and variety to the massing of a building and relieve the negative visual impact of a single, linear roof line.

Horizontal Courses. All visibly exposed sides of a building shall have an articulated base course and cornice. The base course shall be traditionally proportionate to the overall horizontal and vertical dimensions of a building facade and shall align with either the kick plate or sill level of the first story. The cornice shall terminate the top of a building wall plane and shall be ornamented with moldings, brackets, and other details that shall be appropriate to the architectural style of a building. The middle section of a building may be horizontally divided at floor, lintel or sill levels with belt courses. Building courses shall be considered an integral part of the design of a building and shall be architecturally compatible with the style, materials, colors and details of the building.

Continuity of Treatment. The architectural treatment of a facade or roof shall be completely continued around all visibly exposed sides of a building. All sides of a building shall be architecturally designed so as to be consistent with regard to style, materials, colors, and details.

Roof. The type, shape, pitch, texture and color of a roof shall be considered as an integral part of the design of a building and shall be architecturally compatible with the style, materials, colors and details of such building. The minimum permitted roof pitch shall be eight on 12, and all gables on a building of a minimum of two (2) stories in height, provided that all visibly exposed walls shall have an articulated cornice that projects out horizontally from the vertical building wall plane. A mansard roof may be permitted, but only if such is located on the third story of a building, completely and integrally enclosing such story. Flat or mansard roofs shall be prohibited on all one-story buildings. Architectural embellishments that add visual interest to roofs, such as dormers, belvederes, masonry chimneys, cupolas, clock towers and such similar elements shall be permitted, provided that such are architecturally compatible with the style, materials, colors and details of the building.

Windows. Fenestration shall be architecturally compatible with the style, materials, colors and details of a building. Widows shall be vertically proportioned wherever possible. The location of windows on the upper stories of a building shall be vertically aligned with the location of windows and doors on the ground level of such building. Permitted retail and personal service business uses located in business districts may have large pane display windows on the ground level, provided that such window shall be framed by the surrounding wall and shall not comprise greater than 75% of the ground level facade area of such building. All other windows shall be double-hung or casement types. A building designed of an architectural style that normally has windows with muntins or divided lights shall utilize them. Such muntin or divided light grids may be the snap-on type, if fitted on the exterior of the window or between the glazing of the window units.

Mechanical Equipment. All air-conditioning units, HVAC systems, exhaust pipes or stacks and elevator housing shall be shielded from view from a minimum distance of 500 feet from the site. Such shielding shall be accomplished by utilizing the walls or roof of the building or a penthouse-type screening device that shall be designed to be architecturally compatible with the style, materials, colors and details of such building.

Materials, Colors and Details. All materials, colors and details used on the exterior of a building shall be architecturally compatible with the style of such building, as well as with each other. A building design of an architectural style that normally includes certain integral materials, colors and/or details shall have such incorporated into the design of such building.

Shutters. A building designed of an architectural style that normally includes shutters shall provide such on all windows on the front facade. If such building is located on a corner lot, shutters shall be provided on all windows of all facades fronting on a street.

Lighting. Light fixtures attached to the exterior of a building shall be designed to be architecturally compatible with the style, materials, colors and details of such building and other lighting fixtures used on the site. Consideration shall also be given to the type of light source utilized and the light quality such produces. The type of light source used on buildings, signs, parking areas, pedestrian walkways and other areas of a site shall be the same or compatible. The use of low-pressure sodium or mercury vapor lighting either attached to buildings or to light the exterior of buildings shall be prohibited. Lighting for parking lots must maintain a minimum of 0.33 foot-candles in accordance with the standards contained in the Borough Land Development Ordinance.

Signage. Signs affixed to the exterior of a building shall be architecturally compatible with the style, materials, colors, and details of the building and other signs used on the site. Every effort should be made to ensure exterior building signs be externally lighted. All signage shall conform to section of the Borough Land Development Ordinance.

Awnings and Canopies. The ground level of a building in a business district and/or along Somerset Street shall have awnings or canopies, where appropriate, to complement the architectural style of a building. Awnings may also be used on the upper levels of a building, where appropriate. The design of awnings shall be architecturally compatible with the style, materials, colors, and details of such building. All signage on awnings or canopies shall conform to the standards of the Borough Land Development Ordinance.

Multiple Uses. A building with multiple storefronts or other multiple uses, no matter whether such uses are the same type of uses or located on the same floor level, shall be unified through the use of architecturally compatible styles, materials, colors, details, awnings, signage, lighting fixtures and other design elements for all such storefronts or uses.

Corner Buildings. A building on a corner lot shall be considered a more significant structure from an urban design standpoint since such building has at least two front facades visibly exposed to the street. Such building may be designed to have additional height and architectural embellishments relating to its location on a corner lot, if deemed appropriate by the Board.

Multiple Buildings. A development plan that contains more than one building or structure shall be unified through the use of architecturally compatible styles, materials, colors, details, awnings, signage, lighting fixtures and other design elements for all such buildings or structures.

Materials. Exterior building materials shall consist of the following:

Prohibited Materials. The use of bare aluminum or other bare metal materials, exposed concrete block or other exposed building materials utilized as exterior building finishes shall be prohibited. All building materials contained in a facade exterior must have a finished face.

Colors. All exterior portions of a building and all materials used on such shall conform to the approved Somerset Street Downtown Colors. Colors not contained on the Somerset Street Downtown Colors list or building materials that are not available in colors specifically contained on the Somerset Street downtown Colors list may be permitted if such are proven to be substantially consistent and compatible with the Somerset Street Downtown Colors in accordance with the following: