Zoneomics Logo
search icon

Ringwood City Zoning Code

§ 40-5.1

Lot Regulations.

[1985 Code § 22-5.1]
a. 
Lot Width. The minimum lot width shall be measured at the required front yard setback line. In cases of irregularly shaped lots whose sides are not parallel, the street frontage shall not be less than 75% of the required minimum lot width.
b. 
Sight Triangle Areas. Within any sight triangle, no grade, vegetation, sign or other object shall be allowed to exceed a height of 30 inches above the adjacent roadway, in accordance with Chapter 19, Streets and Sidewalks, Section 19-3, Height of Brush at Intersections, of the Revised General Ordinances of the Borough of Ringwood.
c. 
Corner Lot. Corner lots shall have a required front yard along each street line and one required rear yard opposite a front yard, the location of which is to be determined by the property owner. All other yards shall be considered side yards. The location of driveways, front doors or front facades shall not be relevant in regard to the foregoing regulations.
d. 
Through Lots. A through lot shall be considered as having two street frontages, both of which shall be subject to the front yard requirements in the zone in which it is located.
e. 
Frontage Upon a Street. Every principal building or structure shall be built upon a lot with at least the minimum required frontage upon an approved street.
f. 
Lot Located in More Than One Zone. For any lot which is located in more than one zone district, all yard, bulk and other requirements shall be measured from the zone boundary line and not the true lot line.