Zoning Map. The boundaries of the districts enumerated in 525-12 above are hereby established as shown on a map titled "Zoning Map, Village of Woodville, Wisconsin," as amended periodically, which is adopted by reference and made a part hereof. The map shall be available to the public in the office of the Village Clerk-Treasurer.

Boundary lines. The boundaries shall be construed to follow corporate limits; United States Public Land Survey lines; lot or property lines; center lines of streets, highways, alleys, easements and railroad rights-of-way; or such lines extended, unless otherwise noted on the Zoning Map.

Vacation. Vacation of public streets and alleys shall cause the land vacated to be automatically placed in the same district as the abutting side to which the vacated land reverts.

Annexations and consolidations. Annexations to or consolidations with the Village subsequent to the effective date of this chapter shall be placed in the A-1 Agricultural District unless the annexation ordinance temporarily places the land in another district. Within one year, the Plan Commission shall evaluate and recommend a permanent district classification to the Village Board.

Permitted uses. It is the intent of the R-1 Residential District to provide a quiet, enjoyable living area, and the following uses of land are permitted:

Conditional uses. Uses permitted with a conditional use permit are as follows:

Height and area.

Lot area per family.

Split two-family dwelling. Requirements for split two-family dwellings are as follows. Split two-family dwellings will have the same requirements as Subsections C and D of this section for each of the two dwelling units, except as follows:

Permitted uses. In is the intent of the R-2 Multiple-Family Residential District to provide a quiet, enjoyable living area with a somewhat higher density than the R-1 District. The following uses are permitted:

Conditional uses. Uses permitted with a conditional use permit are as follows:

Height and area.

Lot area per family.

Permitted uses. It is the intent of the A-1 Agricultural District to provide for areas of farming and larger lot residential. The following uses are permitted:

Conditional uses. Uses permitted with a conditional use permit areas are as follows:

Height and area.

Lot area per family. Single- and two-family dwellings hereafter erected or constructed for human habitation shall provide a lot area of not less than 15,000 square feet.

Permitted uses. The intent of the B-1 Commercial District is to provide an area for business and commercial needs. The following uses are permitted:

Conditional uses. The uses listed below require a conditional use permit. The location of these uses requires approval as set forth in § 525-21 of Article IV. The Board shall also give due consideration to the proposed location of entrances to and exits from uses that commonly generate a considerable volume of vehicular traffic from and to the public street, in the relation of such entrances and exits to school crosswalks and pedestrian exits from public and semipublic facilities, such as schools and hospitals.

Height and area.

Use. The B-2 Commercial District/Restricted Industrial District is intended to provide for industrial uses that may be suitable when located in areas of relatively close proximity to nonindustrial development. The uses in this district include service industries and industries which manufacture, fabricate, assemble or store products where the process is not likely to create offensive noise, vibration, dust, heat, smoke, odor or glare, increased daily traffic or other objectionable influences to other property in close proximity. Generally, these uses include wholesale, service and light industries which are dependent upon raw materials refined elsewhere. The following uses are permitted:

Conditional uses. The uses listed below are allowed with a conditional use permit in the B-2 District. The location of these uses requires approval as set forth in § 525-21 of Article IV. Such approval shall be consistent with the general purpose and intent of this chapter and shall be based upon such evidence as may be presented at such public hearing tending to establish the desirability or undesirability of specific proposed locations for a specific proposed use from the standpoint of the public interest, because of such factors as (without limitation because of enumeration) noise, odor, glare, vibration and increased traffic on the public streets. The Board shall also give due consideration to the proposed location of entrances to and exits from uses that commonly generate a considerable volume of vehicular traffic from and to the public street, in the relation of such entrances and exits to school crosswalks and pedestrian exits from public and semipublic facilities such as schools and hospitals.

Permitted uses. In is the intent of the I-1 Industrial District to provide an area for industrial and manufacturing uses in an appropriate location. Emphasis is on those uses that do not generate noise, smoke or air or water pollution. All exterior lighting must be down-lit. The following uses are permitted:

Conditional uses. Uses permitted with conditional use permit in the I-1 Industrial District are as follows:

Permitted accessory uses. Permitted accessory uses are as follows:

Height and area.

Permitted uses. It is the intent of the C-1 Conservancy District to discourage development and disturbance to the natural setting in areas with unique features, to provide protected areas to ensure proper water conservation and flood control to protect areas subject to flooding, to give primary consideration to outdoor recreation and forestry pursuits, and to provide areas where native flora and fauna may prosper in a natural habitat. The following uses are permitted:

Conditional uses. The following uses require a conditional permit:

Yard areas.

Other standards. All structures, public utilities and facilities shall be floodproofed in accordance with the standards of Ch. NR 116, Wis. Adm. Code, if located within a floodplain.