Garden City City Zoning Code
WALLS
§ 154.100 OBSCURING WALL STANDARDS.
Where permitted or required by this chapter, obscuring walls shall be subject to the following requirements.
(A) Location. Required obscuring walls shall be placed inside and adjacent to the lot 1ine except in the following instances.
(1) Where underground utilities interfere with placement of the wall at the property line, the wall shall be placed on the utility easement line located nearest the property line.
(2) Subject to Planning Commission approval, required walls in a nonresidential district may be located on the side of an alley right-of-way closest to the adjacent residential zone when mutually agreed upon by affected property owners and residents. The continuity of the required wall shall be considered by the Planning Commission in reviewing such requests.
(3) Walls shall not extend closer to the front lot line than the required front setback.
(B) Corner clearance. Obscuring walls shall comply with the specifications for maintenance of unobstructed sight distance for drivers as set forth in § 154.027.
(C) Substitution or waiver.
(1) As a substitute for a required obscuring wall, the Planning Commission may, in its review of the site plan, approve the use of other existing or proposed living or man-made landscape features (such as closely spaced evergreens) that would produce substantially the same results in terms of screening, durability, and permanence. Any substitute screening shall comply with the applicable requirements set forth in §§ 154.027 and 154.081.
(2) If a fence is approved by the Planning Commission as a suitable substitute for a required obscuring wall, the fence shall be constructed of redwood, cedar, or No. 1 pressure-treated wood. Chain- link fences shall not be permitted for screening purposes.
(3) The Zoning Board of Appeals may waive the requirements for an obscuring wall upon making the determination that either of the following apply.
(a) The adjoining residential district is in transition and will become nonresidential in the future.
(b) Existing physical features provide adequate screening.
(D) Wall specifications. Required walls shall be constructed of masonry material that is architecturally compatible with the materials used on the facade of the principal structure on the site, such as face brick, decorative block, or poured concrete with simulated brick or stone patterns. Alternately, walls may be constructed of precast steel-reinforced panels, anchored in place by steel I- beam columns, provided that the precast panels have a simulated brick or stone pattern that is compatible with the architecture of the principal structure.
(E) Wall requirements. For the uses and districts listed below, an obscuring wall shall be provided as specified along property lines that abut a residential district, except where landscaped screening is permitted by the Planning Commission in lieu of a wall (see § 154.081(E).
Proposed Use or District | Wall Height Requirements |
Proposed Use or District | Wall Height Requirements |
VP, Vehicular Parking District
|
4½ feet
|
Off-street Parking (other than VP District)
|
4½ feet
|
Office uses or Districts
|
4½ feet
|
Multiple-Family uses or Districts adjacent to Single-Family Districts
|
4½ feet
|
Commercial uses or Districts
|
6 feet
|
Industrial uses or Districts
|
6-foot minimum, up to 8 feet to completely screen storage, loading and service areas
|
Utility-Buildings, Substations
|
6 feet
|
Service and Delivery Areas
|
6 feet
|
(Ord. 92-005, passed 2-17-92) Penalty, see § 154.999
§ 154.101 WALLS IN RESIDENTIAL DISTRICTS.
(A) General standards. Walls shall be permitted in residential districts, subject to the standards for location and height set forth in § 154.037. Walls in residential districts shall be constructed of masonry material that is architecturally compatible with the materials on the facade of the principal structure, such as face brick or decorative block, based upon the determination of the Zoning Administrator.
(B) Entranceway structures. Residential subdivision entranceway structures, such as walls, columns or gates which mark the entrance to a single-family subdivision or multiple-family development, shall be permitted in the required setback area, provided that the following are observed.
(1) The entranceway structure shall comply with the requirements for unobstructed sight distance as set forth in § 154.027.
(2) Entranceway structures shall not exceed 4½ feet in height.
(3) Entranceway structures shall not be located in the existing or planned right-of-way.
(4) Approval of the Building Official and issuance of a building permit shall be required prior to construction.
(5) Signage on the entranceway structure shall comply with the Sign Regulations in Chapter 153 of this Code.
(Ord. 92-005, passed 2-17-92) Penalty, see § 154.999