"Alternative tower structure"means manmade trees, clock towers, bell steeples, light poles, buildings, and similar alternative design mounting structures that are compatible with the natural setting and surrounding structures and camouflage or conceal the presence of antennas or towers so as to make them architecturally compatible with the surrounding area pursuant to this title. This term also includes any antenna or antenna array attached to an alternative tower structure. A stand-alone pole in the right-of-way that accommodates small cell facilities is considered an alternative tower structure to the extent it meets the camouflage and concealment standards of this title.
"Antenna"means any device used to transmit and/or receive radio or electromagnetic waves such as, but not limited to, panel antennas, reflecting discs, microwave dishes, whip antennas, directional and nondirectional antennas consisting of one (1) or more elements, multiple antenna configurations, or other similar devices and configurations. Exterior apparatus designed for telephone, radio, or television communications through the sending and/or receiving of wireless communications signals.
"Base station"means a structure or equipment at a fixed location that enables FCC-licensed or authorized wireless communications between user equipment and a communications network. The definition of "base station" does not include or encompass a tower as defined herein or any equipment associated with a tower. Base station does include, without limitation:
1. Equipment associated with wireless communications services such as private broadcast and public safety services, as well as unlicensed wireless services and fixed wireless services such as microwave backhaul that, at the time the relevant application is filed with the city under this title, has been reviewed and approved under the applicable zoning or siting process or under another state or local regulatory review process, even if the structure was not built for the sole or primary purpose of providing such support; and
2. Radio transceivers, antennas, coaxial or fiber-optic cable, regular and backup power supplied, and comparable equipment, regardless of technological configuration (including distributed antenna systems ("DAS") and small-cell networks) that, at the time the relevant application is filed with the city under this chapter, has been reviewed and approved under the applicable zoning or siting process or under another state or local regulatory review process, even if the structure was not built for the sole or primary purpose of providing such support.
The definition of "base station" does not include any structure that, at the time the relevant application is filed with the city under this chapter, does not support or house equipment described in subsections (1) and (2) of this definition. |
Camouflage, Concealment, or Camouflage Design Techniques.Wireless communication facilities (WCF) are camouflaged or utilize camouflage design techniques when any measures are used in the design and siting of a WCF with the intent to minimize or eliminate the visual impact of such facilities to surrounding uses. A WCF site utilizes camouflage design techniques when it (1) is integrated as an architectural feature of an existing structure such as a cupola, or (2) is integrated in an outdoor fixture such as a flagpole, or (3) uses a design which mimics and is consistent with the nearby natural or architectural features (such as an artificial tree) or is incorporated into (including without limitation being attached to the exterior of such facilities and painted to match it) or replaces existing permitted facilities (including without limitation stop signs or other traffic signs, or freestanding light standards) so the presence of the WCF is not readily apparent.
"Collocation"means the mounting or installation of transmission equipment on an eligible support structure for the purpose of transmitting and/or receiving radio frequency signals for communications purposes.
"Eligible facilities request"means any request for modification of an existing tower or base station that does not substantially change the physical dimensions of such tower or base station involving: (1) collocation of new transmission equipment, (2) removal of transmission equipment, or (3) replacement of transmission equipment.
"Eligible support structure"means any tower or base station as defined in this section; provided, that it is existing at the time the relevant application is filed with the city under this section.
"Existing tower or base station"means a constructed tower or base station that was reviewed, approved, and lawfully constructed in accordance with all requirements of applicable law as of the time it was built; for example, a tower that exists as a legal, nonconforming use and was lawfully constructed is existing for purposes of this definition.
"OTARD"means an over-the-air receiving device.
"OTARD antenna"means (1) an antenna that is designed to receive direct broadcast satellite service, including direct-to-home satellite services, which is one (1) meter or less in diameter; or (2) an antenna that is designed to receive video programming services via multipoint distribution services, including multichannel multipoint distribution services, instruction television fixed services, and local multipoint distribution services, which is one (1) meter or less in diameter or diagonal measurement; or (3) an antenna that is designed to receive television broadcast signals.
"Site for towers (other than towers in the right-of-way and eligible support structures)"means the current boundaries of the leased or owned property surrounding the tower or eligible support structure and any access or utility easements currently related to the site. A site, for other alternative tower structures, base stations, and small cell facilities in the right-of-way, is further restricted to that area comprising the base of the structure and to other related accessory equipment already deployed on the ground.
"Small cell facility"means a WCF where each antenna is located inside an enclosure of no more than three (3) cubic feet in volume or, in the case of an antenna that has exposed elements, the antenna and all of its exposed elements could fit within an imaginary enclosure of no more than three (3) cubic feet, and primary equipment enclosures are no larger than seventeen (17) cubic feet in volume. The following associated equipment may be located outside of the primary equipment enclosure and, if so located, is not included in the calculation of equipment volume: electric meter, concealment, telecommunications demarcation box, ground-based enclosure, back-up power systems, grounding equipment, power transfer switch, and cut-off switch.
"Substantial change for eligible support structures"means a modification that substantially changes the physical dimensions of an eligible support structure if, after the modification, the structure meets any of the following criteria: (1) for towers other than alternative tower structures or towers in the right-of-way, it increases the height of the tower by more than ten percent (10%) or by the height of one (1) additional antenna array, with separation from the nearest existing antenna not to exceed twenty (20) feet, whichever is greater; for other eligible support structures, it increases the height of the structure by more than ten percent (10%) or more than ten (10) feet, whichever is greater; (2) for towers other than towers in the right-of-way, it involves adding an appurtenance to the body of the tower that would protrude from the edge of the tower more than twenty (20) feet, or more than the width of the tower structure at the level of the appurtenance, whichever is greater; for eligible support structures, it involves adding an appurtenance to the body of the structure that would protrude from the edge of the structure by more than six (6) feet; (3) for any eligible support structure, it involves installation of more than the standard number of new equipment cabinets for the technology involved, but not to exceed four (4) cabinets; or for towers in the right-of-way and base stations, it involves installation of any new equipment cabinets on the ground if there are no preexisting ground cabinets associated with the structure, or else involves installation of ground cabinets that are more than ten percent (10%) larger in height or overall volume than any other ground cabinets associated with the structure; (4) for any eligible support structure, it entails any excavation or deployment outside the current site; (5) for any eligible support structure, it would undermine the concealment elements of the eligible support structure; or (6) for any eligible support structure, it does not comply with conditions associated with the siting approval of the construction or modification of the eligible support structure or base station equipment, unless the noncompliance is due to an increase in height, increase in width, addition of cabinets, or new excavation that would not exceed the thresholds identified in subsections
(1),
(2) and
(3) of this definition. For purposes of determining whether a substantial change exists, changes in height are measured from the original support structure in cases where deployments are or will be separated horizontally, such as nonbuildings' rooftops; in other circumstances, changes in height are measured from the dimensions of the tower or base station, inclusive of originally approved appurtenances and any modifications approved prior to the effective date of this section.
"Tower"means any structure that is designed and constructed and primarily built for the sole or primary purpose of supporting one (1) or more FCC-licensed or authorized antennas and their associated facilities, including structures constructed for wireless communications services including, but not limited to, private, broadcast, and public safety services, as well as unlicensed wireless services and fixed wireless services such as microwave backhaul, and the associated site. The term includes self-supporting lattice towers, guy towers, monopole towers, radio and television transmission towers, microwave towers, common carrier towers, cellular telephone towers, alternative tower structures, and the like.
"Transmission equipment"means equipment that facilitates transmission for any FCC licensed or authorized wireless communication service including, but not limited to, radio transceivers, antennas, coaxial or fiber-optic cable, and regular and backup power supply. The term includes equipment associated with wireless communications services including, but not limited to, private, broadcast, and public safety services, as well as unlicensed wireless services and fixed wireless services such as microwave backhaul.
"Wireless communications facility or WCF"means a facility used to provide personal wireless services as defined at 47 U.S.C. Section 332 (c)(7)(C); or wireless information services provided to the public or to such classes of users as to be effectively available directly to the public via licensed or unlicensed frequencies; or wireless utility monitoring and control services. A WCF does not include a facility entirely enclosed within a permitted building, where the installation does not require a modification of the exterior of the building; nor does it include a device attached to a building, used for serving that building only, and is otherwise permitted under other provisions of the code. A WCF includes an antenna or antennas including, without limitation, direction, omni-directional, and parabolic antennas, base stations, support equipment, alternative tower structures, and towers. It does not include the support structure to which the WCF or its components are attached, if the use of such structures for WCFs is not the primary use. The term does not include mobile transmitting devices used by wireless service subscribers, such as vehicle or handheld radios/telephones and their associated transmitting antennas, nor does it include other facilities specifically excluded from the coverage of this section.
(Ord. 2017-5 § 1 (part))