Grosse Ile Township
City Zoning Code
City Zoning Code
ARTICLE 16
Sign Regulations
[Ord. No. 286, effective 4-16-2000]
285-16.1 Intent.
The regulations contained herein are instituted to provide for the establishment of signs, lighting, and displays that will promote viable commercial and industrial activity but will not, by reason of their size, location, spacing, construction, or manner of display, endanger life or limb, confuse or mislead traffic, obstruct vision necessary for traffic safety, or otherwise endanger the public health or safety. Furthermore, it is the intent of these regulations to preserve and improve the appearance of the Township by preventing placement of oversized signs that are out of scale with surrounding buildings and structures or an excessive accumulation of signs that would cause visual clutter. These regulations are further intended to regulate permitted signs in such a way as to create land use patterns that are compatible with major land use objectives and to prevent such signs from causing annoyance or disturbance to the citizens and residents of the Township.
285-16.2 Scope of application and permit requirements.
Scope of application. It shall be unlawful for any person, firm, or corporation to erect, construct, or alter any sign in the Township without complying with the provisions of this chapter. Any sign already established on the effective date of this chapter, and which is rendered nonconforming by the provisions herein or subsequent amendments hereto, shall be subject to the regulations concerning nonconforming structures and uses set forth in Article 18 herein.
Permits. No new sign shall be erected, constructed, affixed, or painted unless a sign permit shall first have been approved and issued in accordance with the provisions set forth herein. The amount of the permit fee shall be established by resolution of the Township Board.
Application for permit. Application for sign permits shall be made upon forms provided for this purpose by the Community Development Department and shall include:
Plans and specifications showing the dimensions, materials and required details of construction, including loads, stresses, and anchorage;
Plans indicating the location of the sign(s) on buildings, structures or parcels of land;
Written consent of the owner or lessee of the premises upon which the sign is to be erected;
The name of the person, firm, or corporation owning, erecting, maintaining, and operating such sign; and
All other information required on the application form.
Review of application. The Community Development Department shall review all applications for sign approval and shall issue sign permits for each application which complies with all of the regulations set forth herein.
Alterations. A sign shall not be enlarged, relocated or otherwise altered unless a proper permit has been secured to ensure conformity with the provisions set forth herein for new signs. The changing of movable parts of an approved sign that is designed for such changes (such as lettering on a marquee or numbers on a gasoline price sign) or the repainting or reposting of display matter shall not be deemed an alteration and shall not require a new permit, provided the conditions of the original approval and the requirements set forth herein are not violated.
Permit not required. A permit shall not be required for the following signs:
Street address signs and signs denoting the name and address of the occupants of the premises, including professional nameplates, provided such signs do not exceed one square foot in area and four feet in height. If such signs are freestanding, they shall be set back a minimum distance of six feet from the property line;
Nameplate and identification signs;
Signs accessory to parking areas; and
Temporary window signs.
285-16.3 Inspection and maintenance of signs.
Inspection of new signs. All signs for which a permit is required shall be inspected by the Community Development Department when erected, and if found to have been constructed, supported, braced, and painted in accordance with the approved plans and the provisions of this chapter, then a certificate of inspection shall be issued. In cases where fasteners, anchorages, etc., are to be installed and bricked in or encased in such a manner that the inspector would not be able to inspect said fasteners or anchorages, the sign erector shall advise the Department of Community Development when said fasteners or anchorages are to be installed so that inspection may be completed before enclosure; otherwise, the Building Official shall be empowered to stop further construction or erection of said sign until any such concealed fasteners or anchorages are inspected and approved.
Correction of defects with new signs. Should any new sign erection be found unsafe, not secure, improperly constructed, or not in accordance with the approved plans or requirements of this chapter, the sign erector, owner of the sign, or owner of the land shall make such erection safe, secure, and according to the requirements of this chapter or entirely remove the sign in accordance with the following timetable:
If the Community Development Department determines that the sign is an immediate threat to the safety of persons nearby, all required action to correct the defect shall be taken within 48 hours (two working days) from the time of notification in writing from the Department of Community Development, provided the sign can be cordoned off or adequately secured during the intervening time so as to remove any immediate threat to safety. If said sign cannot be cordoned off or secured so as to eliminate any immediate threat to safety, then all required action to correct the defects shall be made without delay.
If the Community Development Department determines that the sign is not an immediate threat to the safety of persons nearby, all required action to correct the defect shall be taken within seven working days after notification in writing from the Department of Community Development.
If defects are not corrected within the specified time limits, the Department of Community Development may remove such sign at the expense of the sign owner or lessee.
Correction of defects with existing signs. If, upon inspection, an existing sign is found to be unsafe, not secure, corroded, or subject to corrosion or otherwise poorly maintained so that the sign may become unsafe or not secure, then the owner shall make the sign safe and secure by completing any necessary reconstruction, repairs, painting, or other improvements in accordance with the timetable for correcting defects with new signs, as outlined in Subsection B above, except as follows:
If the Community Development Department determines that the sign is not an immediate threat to the safety of persons nearby, all required action to correct the defect shall be taken within 30 days after notification in writing from the Department of Community Development.
The Community Development Department may extend the thirty-day timetable if temperatures below 25° F. prevent painting or if the defects are minor, not generally noticeable to the public, and not a hazard to public safety.
285-16.4 Appeal to Zoning Board of Appeals.
Appeals process. Any party who has been refused a sign permit by the Community Development Department for a proposed sign installation may file a claim of appeal to the Zoning Board of Appeals. The Zoning Board of Appeals shall consider the appeal in accordance with the procedures set forth in § 285-23.4. The Zoning Board of Appeals may grant such appeal and allow a variance to the sign provisions of this chapter upon finding that:
Because of extraordinary circumstances on the site, compliance with the provisions of these sign regulations would result in a particular hardship (as distinguished from mere inconvenience or a desire to make more money);
Strict enforcement of these sign regulations would serve no useful purpose; and
A variance would be in the best interests of the Township and not in conflict with the spirit and intent of this chapter.
Permit process. Upon granting of a variance by the Zoning Board of Appeals, the Community Development Department shall grant a sign permit, provided that all other requirements of this chapter have been met and all required permit fees have been paid. A sign that is permitted by virtue of a variance shall be subject to all other applicable requirements of this chapter which are not in conflict with the terms of the variance.
285-16.5 General limitations and provisions.
Any sign erected after the effective date of this chapter shall be subject to the following limitations and provisions:
Nonconforming or obsolete signs. Obsolete signs, which include all signs that advertise a product that is no longer made or that advertise a business that has closed, shall be removed within 30 days by the owner, agent, or person having beneficial use of the building or structure. Upon vacating a commercial or industrial establishment, the proprietor shall be responsible for the removal of all signs used in conjunction with the business. However, where a conforming sign structure and frame are typically reused by the current occupant or business in a leased or rented building, the building owner shall not be required to remove said sign structure and frame in the interim period when the building is not occupied, provided the sign structure and frame are maintained in accordance with the standards of this chapter and the Township's adopted Building Code.[1]
Exempt signs. The sign regulations set forth herein shall not apply to the following signs, provided such signs are in compliance with all other applicable regulations and ordinances:
Signs not visible beyond the boundaries of the lot or parcel upon which they are situated or from any public thoroughfare or right-of-way;
Miscellaneous traffic and other official signs of any public or governmental agency, such as traffic control or directional signs, legal notices, historic site designations, trespassing signs, signs indicating danger, signs indicating the location of USGS benchmarks, airfield signs, or signs used as aids to service or safety;
Any flag, emblem, or insignia of our nation, its governmental units, or its schools;
Any sign which is located completely within an enclosed building and which is not visible from outside of the building;
Tablets, grave markers, headstones, statuary, or similar remembrances of persons or events;
Temporary decorations or displays celebrating the occasion of traditionally accepted patriotic or religious holidays and special municipal and school activities;
Public safety and routing signs used on construction sites; and
Any sign on a bus, truck, trailer, or other vehicle while operated and used for transport in the normal course of a business which is not primarily the display of signs.
Prohibited signs. The following signs shall not be permitted or erected in any district:
Any sign which is not expressly permitted by the regulations set forth herein;
Signs which have flashing, blinking or moving lights or exposed incandescent light bulbs;
Cloth and banner signs, pennants, spinners, paper festoon signs, and similar devices, except as specifically permitted herein;
String lights used for advertising purposes other than Christmas or other decorations;
Any sign which has any visible moving parts, visible revolving parts, visible mechanical movement of any description, or other apparent visible movement achieved by electrical, electronic, or mechanical means, including intermittent electrical pulsations, or by action of normal wind current;
Any sign or sign structure which is structurally unsafe, or constitutes a hazard to safety or health by reason of inadequate maintenance, dilapidation or abandonment, or is not kept in good repair or is capable of causing electrical shock to persons likely to come in contact with it;
Any sign which obstructs a window, door or other opening that could be used for fire escape;
Any sign which makes use of the words "Stop," "Look," or "Danger" or any other words, phrases, symbols, or characters in such a manner as to interfere with, mislead, or confuse drivers;
Any sign or other advertising structure containing obscene, indecent, or immoral matter;
Any sign unlawfully installed, erected, or maintained;
Any sign now or hereafter existing which no longer advertises a bona fide business conducted or product sold;
Any sign erected so as to impair access to a roof;
Any sign that projects above the parapet line or eaves of any roof, except as specifically permitted herein;
Any sign, other than an official notice of the Township, school district, or other public entity, that is attached to a utility pole, tree, or other object located or situated on public property;
Portable or temporary signs except as specifically permitted by this chapter;
Signs painted on or attached to a parked vehicle, truck, trailer, or van which is being used principally for advertising purposes rather than for transportation purposes;
Sandwich board signs;
Signs on street furniture, such as benches, newspaper stands, and trash receptacles;
[Amended 4-13-2015 by Ord. No. 15-002]
Any sign which projects into the public right-of-way; and
[Amended 4-13-2015 by Ord. No. 15-002]
Electronic changeable message signs, except where expressly allowed in this article.
[Added 4-13-2015 by Ord. No. 15-002]
Structural requirements. All signs shall be constructed and erected in a safe and stable manner in accordance with provisions of the Township's adopted Building Code,[2] the National Electrical Code, and this section. All electrical wiring associated with ground or freestanding signs shall be installed underground. All signs must be mounted so that the backs of the signs are screened from view.
Motorist visibility. No sign shall be located on or near any street corner or near any right-of-way which would obscure vision of drivers using said street, and no sign shall in any way conflict with traffic control signals or signs at the intersection of any streets. No signs shall be located so as to impair or impede the visibility of a vehicle entering into or exiting from a parcel of property.
Illumination. The following provisions shall apply to the illumination of all signs:
Signs shall be illuminated only by steady, stationary, shielded light sources directed solely at the sign, or internal to it, without causing glare for motorists, pedestrians, or neighboring premises.
All exterior illumination shall be shaded so as not to project onto adjoining property or thoroughfares.
Direct exterior illumination and internally illuminated signs shall avoid the use of glaring undiffused lights or bulbs that could distract motorists.
No signs shall be illuminated by the use of flashing, moving, or intermittent lighting.
Sign measurements.
Sign area. Except as noted, the area of all signs shall be computed by measuring the area of the envelope required to enclose the lettering or logo and the structures to which the letters or logo is attached. In the case of a wall sign attached to a building, the envelope shall be around the letters or logo. The sign support shall not be considered when measuring the area of a ground or freestanding sign.
The area of a monolith sign shall be computed by measuring the entire vertical surface of a face upon which the letters or logo is attached. In the case of a double-face or multi-faced monolith sign, the area of the sign shall be computed using only one face of the sign. The area of a cylindrical monolith sign shall be computed by multiplying the diameter of the cylinder by its height.
Setback and distance requirements. In determining conformance with setback standards and distance requirements, the following guidelines shall be used:
The distance between two signs shall be measured along a straight horizontal line that represents the shortest distance between the two signs.
The distance between a sign and a parking lot or processing area shall be measured along a straight horizontal line that represents the shortest distance between the sign and the outer edge of the parking lot or processing area.
The distance between a sign and a property line shall be measured along a straight line that represents the shortest distance between the sign and the property line.
The horizontal distance between a freestanding sign (such as a pole-mounted sign) and any other point shall be measured from the edge of the sign face rather than from the edge of the pole or other structural support.
285-16.6 Specific sign requirements for all districts.
Temporary marketing signs. Freestanding and wall-mounted signs offering the premises on which they are located for sale, for lease or for rent shall be permitted in all districts subject to the following controls:
Number. There shall not be more than one such sign per parcel.
Area. No real estate sign shall exceed six square feet in area.
Height. No freestanding real estate sign shall project higher than five feet above the existing average grades.
Location. Real estate signs shall be located on private property. If freestanding, they will be set back six feet from the property line.
Duration. Real estate signs shall be removed within 10 days after sale or lease of a property or, in the case of rental property, 10 days after final occupancy has been issued to the entire development.
Temporary political signs. The following provisions recognize the special needs of the community in presenting diversified opinions, educating the public or advertising or advocating a candidacy or cause in a forthcoming election. Therefore, temporary political signs, under those circumstances, shall be permitted in any district, subject to the following conditions:
Area. Temporary political signs shall be no larger than three square feet in area.
Height. No temporary political sign shall project higher than four feet above the existing grade.
Installation time frame. Temporary political signs shall not be installed or placed upon property prior to three weeks before the election or vote upon any proposition or candidate advertised thereon or to which the sign or signs pertain.
Removal of signs. It shall be the responsibility of the political candidate or campaign chairperson to cause such temporary political signs to be removed within five days after the date of the election or vote upon the proposition to which the sign or signs pertain.
Permission required. The candidate or campaign manager shall obtain the permission of the owner of a building, structure, or property prior to posting a temporary political sign.
Location. Political signs shall be set back six feet from the property line.
Signs for churches, schools, and other institutional uses. Churches, schools, and other institutional uses shall be permitted to erect signs subject to the same standards as other signs for the district in which they are located. However, in recognition of the fact that such uses are often located in residential districts where signs may not be permitted, such uses may nevertheless erect signs for the purposes of identifying the church, school, or other institutional use; identifying affiliated uses, such as a parsonage; stating the time or subject of church services, the denomination of the church, or school classes; or presenting other related information. Such signs shall conform to the following regulations:
Number. There shall be no more than one sign per use. In the case of a school, parsonage, or other facility affiliated with and located on the same parcel as a church or other institutional use, one additional sign shall be permitted for the purposes of identification of said school, parsonage, or other affiliated facility.
Area. No such sign shall exceed 32 square feet.
Height. No sign shall project higher than eight feet above the existing average grade.
Location. Such signs shall be located at least 10 feet from the property line.
Municipal signs. Signs erected on municipal sites by the Township of Grosse Ile shall conform to the standards for signs for churches, schools, and other institutional uses, as set forth previously.
Signs on construction sites. On sites on which a building or structure is legally under construction, one wall, ground, or freestanding sign shall be permitted for the purposes of identifying the building, the designer, the builder, and other participating entities.
On individual home sites, the area of such sign shall not exceed six square feet in area or five feet in height, and the sign shall be set back at least six feet from the property line.
In nonresidential districts, the area of such sign shall not exceed 24 square feet in area and eight feet in height, and the sign shall be set back at least 10 feet from the property line.
Community group signs. The Township Community Development Department may issue a temporary sign permit to allow the posting of signs on Township-owned property by community groups that are nonprofit agencies operating within the Township. Such signs shall be located outside of the road right-of-way and shall be removed within 30 days of the permit issuing date.
285-16.7 Residential district signs.
The following signs shall be permitted in all districts zoned for residential purposes, including districts zoned R-1-A, R-1-B, R-1-C, R-1-D, R-2, R-3, and R-4:
Street number. For the purposes of public safety, the street number of every residential building shall be prominently displayed on a side of the building facing the street, using numbers that are at least three inches in height.
Nameplate and identification signs. Nameplate and identification signs for the purposes of indicating the name and address of the occupant shall be permitted in residential districts subject to the following regulations:
Number. There shall be not more than one nameplate or identification sign, which may be either freestanding or attached to the building.
Area. Such signs shall be no larger than one square foot.
Height. Such signs shall project no higher than four feet above curb level.
Location. Such signs shall be located at least six feet inside all property lines if freestanding.
Nonresidential advertising or identification signs. No signs shall be permitted in a residentially zoned district that advertise or identify a nonresidential use, except as permitted herein.
Signs accessory to parking areas. Signs accessory to parking areas shall be permitted in multiple-family residential and mobile home park districts subject to the following controls:
Entrance-exit and directional signs. Signs designating parking area entrances and exits, providing directions, designating "no parking" areas, and identifying parking spaces for the handicapped shall be permitted as needed within parking areas.
Identification signs. One sign per entrance to a parking area shall be permitted for the purpose of designating the conditions of use or identity of such parking area. Such signs shall not exceed four square feet in area.
Garage sale signs. Garage sale signs shall be permitted in residentially zoned districts subject to the following controls:
Permanent residential identification signs.
Permanent identification signs for residential subdivisions or developments shall be permitted subject to the following controls:
Purpose. Permanent residential identification signs shall bear only the name of the development or subdivision, the address of the building if a multiple-family structure, and the name and address of the management, if applicable.
Number. There shall not be more than one such sign located at each entrance to the subdivision or development.
Area. No such sign shall exceed 24 square feet in area.
Height. No such sign shall project higher than eight feet above the existing grade.
Location. Such signs shall be located on private property, at least 10 feet inside all property lines.
Permanent identification signs for individual multiple-family buildings shall be permitted subject to the following controls:
Purpose. Such signs shall be for the purpose of identifying individual buildings within a residential subdivision or development.
Number. There shall be no more than one such sign per individual building.
Area. No such sign shall exceed six square feet in area.
Height. No such sign shall project higher than five feet above the existing average grade.
Location. Such signs shall be located on private property, at least six feet inside all property lines if freestanding.
Temporary marketing signs in residential subdivisions.
Real estate signs. Temporary marketing signs accessory to residential subdivisions which are under construction shall be permitted for the purpose of identifying homes, condominiums, apartments, or mobile home sites for sale or rent. Such signs shall be subject to the following controls:
Number. One such sign shall be permitted for each entrance, provided that no more than two such signs shall be permitted per development or subdivision.
Area. Such signs shall not exceed 24 square feet in area.
Height. No such sign shall project higher than eight feet above the existing average grade.
Location. Such signs shall be located on private property, at least 10 feet inside all property lines if freestanding.
Time limitation. A sign permit for any such temporary accessory sign shall have a time limitation of two years. After the two-year period, sign permits may be renewed yearly if at least 5% of the lots remain vacant and available and new homes remain under construction. Such signs shall be removed upon cessation of new home marketing within the subdivision or development, when 95% of all lots have been sold, or when the permit expires, whichever comes first.
Open house signs. Open house signs shall be permitted, provided such signs do not exceed six square feet in area and five feet in height. If signs are freestanding, they shall not extend beyond the property line and shall be permitted only on the premises of the open house.
Model home signs. Model home signs shall be permitted for the purposes of identifying the model style, provided such signs do not exceed six square feet in area or five feet in height. If signs are freestanding, they shall be located on private property, at least six feet from any property line.
285-16.8 Commercial, industrial and airport district signs.
The following signs shall be permitted in all districts zoned for commercial, industrial, or airport purposes (other than the Airport Industrial Park), including districts zoned C-1, MSD and A-1:
Signs for residential district uses in commercial districts. Signs for nonconforming residential district uses in commercial, industrial or airport districts shall be governed by the sign regulations for residential district uses as set forth in § 285-16.7.
Required street address. For the purposes of public safety, the street number of every commercial and industrial building shall be prominently displayed on a side of the building facing the street, using numbers that are at least five inches in height.
General requirements.
Total sign area.
The total area of all signs shall not exceed 1 1/2 square feet for each linear foot of building frontage facing a public street, provided that the total sign area shall not exceed 50 square feet, and except that signs in the Grosse Ile Industrial Park shall conform to the sign area requirements set forth in the Declaration of Covenants and Restrictions upon the use of land therein.
One wall, ground, or freestanding sign with a maximum area of 32 square feet shall be permitted to identify a shopping center, or similar use, or the businesses therein, provided the shopping center or other such use has minimum street frontage of 30 feet. If said sign is used as a tenant directory sign, the total sign area shall be allocated on an equal basis to all tenants. The placement of such a sign shall not result in any reduction in the number or total area of signs otherwise permitted under the provisions of this chapter.
Types of permitted signs. Total permitted sign area may be allocated among one or more of the following types of signs, subject to the provisions which follow: wall-mounted signs, ground or freestanding signs, projecting signs, marquee signs, signs on awnings and canopies, or window signs.
Signs in the Grosse Ile Industrial Park. Signs located in the Grosse Ile Industrial Park shall conform to the requirements for signs specified in the Declaration of Covenants and Restrictions upon the use of land in the Grosse Ile Industrial Park.
Specific requirements.
Wall-mounted signs. Wall-mounted signs, including signs located on the face of mansard-type roofs, shall be permitted in commercial and industrial districts subject to the following controls:
Location. Wall-mounted signs shall be located on the fronts of buildings, except that buildings located on a corner lot shall be permitted to install one wall-mounted sign on the side of the building facing a street.
Dimensions. The maximum vertical dimension of any wall-mounted sign shall not exceed 1/3 of the height of the building. The maximum horizontal dimension of any wall-mounted sign shall not exceed 3/4 of the width of the building.
Projection. Wall-mounted signs shall not project farther than 12 inches from the face of the wall and shall not project beyond the building line.
Ground or freestanding signs. Ground or freestanding signs shall be permitted in commercial or industrial districts (excluding Airport District) subject to the following controls:
Number. Individual businesses shall be permitted to have one ground or freestanding sign, provided that building frontage on a public street is at least 30 feet, and provided further that all setback requirements can be complied with. In the event that individual businesses cannot comply with the setback or frontage requirements, two or more adjoining businesses may jointly apply for a permit for one ground or freestanding sign that would serve all of the joined businesses, provided that the joined businesses are capable of meeting the frontage and setback requirements.
Area. Total area of a ground or freestanding sign shall not exceed 32 square feet.
Height. The top of a ground or freestanding sign shall be five feet above the average grade plus one foot for each three feet of setback with a maximum height of 15 feet.
Location. Ground or freestanding signs shall be located on private property, no closer than one foot to the property line. No such sign shall project over public property or adjoining private property.
Distance from other signs. Ground or freestanding signs shall be located at least 35 feet from any other ground or freestanding sign.
Projecting signs. Projecting signs shall be permitted in commercial and industrial districts (excluding Airport Industrial Park) subject to the following controls:
Area. Projecting signs shall not exceed eight square feet in area.
Height. The top of a projecting sign shall not be higher than 15 feet above the existing average grade.
Width. The width of a projecting sign, as measured between the two faces, shall not exceed 12 inches.
Vertical clearance. A minimum vertical clearance of nine feet shall be provided beneath any projecting sign.
Projection. Projecting signs shall not project over public property or adjoining private property.
Marquee signs. Marquee signs shall be permitted in commercial districts subject to the following controls:
Area. Marquee signs shall not exceed 1 1/2 square feet per linear foot of building frontage on a public street.
Height. The top of a marquee sign shall not be higher than 15 feet above grade.
Vertical clearance. A minimum vertical clearance of nine feet shall be provided beneath any marquee sign.
Projection. Marquee signs shall not project over public property or adjoining private property.
Signs on awnings and canopies. Signs on awnings and canopies shall be permitted in commercial or industrial districts subject to the following controls:
Area. The total area of the lettering and logo shall not exceed 25% of the total area of the awning or canopy that is visible from the street.
Vertical clearance. A minimum vertical clearance of nine feet shall be provided beneath any projecting awning or canopy sign(s).
Projection. Awnings and canopies shall not project over public property or adjoining private property.
Temporary cloth and banner signs, pennants and other devices. Temporary cloth and banner signs, pennants, streamers, balloons, and similar devices shall be permitted in commercial districts subject to the following controls:
Duration. Temporary cloth and banner signs, pennants, and other such devices shall be erected for no longer than 30 days. Damaged signs, pennants, and other such devices shall be removed or repaired immediately.
Area. Temporary cloth and banner signs shall not exceed 32 square feet in area. The placement of such signs or devices shall not result in any reduction in the number or total area of signs otherwise permitted under the provisions of this chapter.
Location. Temporary cloth and banner signs, pennants, and other such devices shall be located no closer than six feet to any property line and shall be located where they will not obstruct pedestrian or vehicular traffic.
Illumination. Cloth or banner signs, pennants, and other such devices shall not be purposely illuminated.
Gasoline price signs. Gasoline price signs shall be permitted in commercial or industrial districts subject to the following controls:
Number. One gasoline price sign shall be permitted for each gas station.
Area. Such signs shall not exceed 20 square feet in area. The placement of such signs or devices shall not result in any reduction in the number or total area of signs otherwise permitted under the provisions of this chapter.
Height. The top of a gasoline price sign shall be no higher than 15 feet above average grade.
Location. Such signs shall be located on private property, no closer than one foot to any property line. Such signs shall not project over public property or adjoining private property.
Vertical clearance. A minimum vertical clearance of nine feet shall be provided beneath any gasoline price sign.
Price signs. The price of gasoline only may consist of an electronic changeable message, provided:
[Added 4-13-2015 by Ord. No. 15-002]
Window signs. Temporary and permanent window signs shall be permitted on the inside in commercial districts provided that the total combined area of such signs does not exceed 1/3 of the total window area. The area of permanent window signs shall be counted in determining compliance with the standards for total area of signs on the parcel. Temporary window signs that are faded, yellowed, ripped, or otherwise damaged shall be removed immediately.
285-16.9 Open space district signs.
Signs shall be permitted in the O-1 Open Space District and PRD Public Recreation District subject to the controls for signs for churches, schools, and other institutional uses as set forth in § 285-16.6.
285-16.10 Lighting.
Lighting shall be placed and shielded so as to direct the light onto the site and away from adjoining properties. The lighting source shall not be directly visible from adjoining properties. Lighting shall be shielded so that it does not cause glare for motorists.
Lighting used for illumination of the exterior of buildings shall be placed and shielded so as not to interfere with the vision of persons on adjacent roads or adjacent properties.