search icon

Kittitas County Unincorporated
City Zoning Code

CHAPTER 17

28A A-5 - AGRICULTURE ZONE

§ 17.28A.010 Purpose and intent.

The purpose and intent of the agriculture (A-5) zone is to provide for an area where various agricultural activities and low density residential developments co-exist compatibly. A-5 zones are predominately agricultural-oriented lands and it is not the intent of this section to impose further restrictions on continued agricultural activities therein.
(Ord. 2005-05, 2005; Ord. 2013-008, 2013)

§ 17.28A.020 Allowed uses.

Allowed uses in the agriculture (A-5) zone include those uses pursuant to KCC Chapter 17.15.
(Ord. 2005-05, 2005; Ord. O-2006-01, 2006; Ord. 2007-22, 2007; Ord. 2011-013, 2011; Ord. 2013-001, 2013; Ord. 2013-008, 2013)

§ 17.28A.030 Lot size required.

1. 
The minimum residential lot size shall be five (5) acres in the agriculture zone, unless within a cluster plat as provided for in KCC Chapter 16.09, Cluster Platting and Conservation Platting. Lots within a cluster plat shall be a minimum of one-half (½) acre. The overall density of any residential development shall not exceed one (1) dwelling for each five (5) acres.
2. 
The minimum average lot width shall be two hundred fifty (250) feet.
(Ord. 2005-05, 2005; Ord. 2007-22, 2007; Ord. 2013-001, 2013; Ord. 2013-008, 2013)

§ 17.28A.040 Yard requirements - Front.

There shall be a minimum front yard of twenty-five (25) feet.
(Ord. 2005-05, 2005; Ord. 2013-001, 2013)

§ 17.28A.050 Yard requirements - Side.

Side yard shall be a minimum of five (5) feet. Side yard setbacks may be modified in accordance with KCC § 16.10.065.
(Ord. 2005-05, 2005; Ord. 2013-001, 2013; Ord. 2019-013, 2019; Ord. 2022-005, 2022)

§ 17.28A.060 Yard requirements - Rear.

There shall be a rear yard with a minimum depth of twenty-five (25) feet. Rear yard setbacks may be modified in accordance with KCC § 16.10.065.
(Ord. 2005-05, 2005; Ord. 2013-001, 2013; Ord. 2022-005, 2022; Ord. 2022-017, 2022)

§ 17.28A.065 Yard requirements - Zones adjacent to Commercial Forest Zone.

Properties bordering or adjacent to the Commercial Forest zone are subject to a two hundred (200)-foot setback from the Commercial Forest Zone. (KCC § 17.57.050(1)). For properties where such setback isn't feasible, development shall comply with KCC § 17.57.050(2).
(Ord. 2007-22, 2007; Ord. 2013-001, 2013)

§ 17.28A.080 Sale or conveyance of lot portion.

No sale or conveyance of any portion of a lot, for other than a public purpose, shall leave a structure or the remainder of the lot with less than the minimum lot, yard or setback requirements of this zone.
(Ord. 2005-05, 2005; Ord. 2013-001, 2013)

§ 17.28A.090 Off-street parking.

1. 
One automobile parking space shall be provided for each dwelling unit and shall be located to the rear of the building setback line.
2. 
Residential parking exceptions.
a. 
Garages are not required to meet minimum parking spaces required in Table 17.11.039(4)(a)(i).
b. 
Parking spaces that count towards minimum parking requirements may be enclosed or unenclosed.
c. 
Tandem parking spaces must count towards meeting minimum parking requirements at a rate of one space for every 20 linear feet with any necessary provisions for turning radius.
d. 
Existence of legally nonconforming gravel surfacing in existing designated parking areas may not be a reason for prohibiting utilization of existing space in the parking area to meet local parking standards, up to a maximum of six parking spaces.
e. 
Parking space sizes shall be eight feet by 20 feet, except for required parking for people with disabilities.
f. 
Off-street parking is not required as a condition of permitting a residential project if compliance with tree retention would otherwise make a proposed residential development or redevelopment infeasible.
g. 
Parking spaces that consist of grass block pavers may count toward minimum parking requirements.
h. 
Existing parking spaces that do not conform to the requirements of this section by June 6, 2024, are not required to be modified or resized, except for compliance with the Americans with Disabilities Act[1]. Existing paved parking lots are not required to change the size of existing parking spaces during resurfacing if doing so will be more costly or require significant reconfiguration of the parking space locations.
[1]
Editor's Note: See 42 U.S.C. Section 12101 et seq.
(Ord. 2005-05, 2005; Ord. 2026-004, 6/16/2026)

§ 17.28A.100 Access requirement.

No dwelling shall be constructed or located on a lot or parcel which is not served by a legal sixty-foot (60) right-of-way or existing county road.
(Ord. 2005-05, 2005; Ord. 2013-001, 2013)

§ 17.28A.110 Setback lines.

None of the following uses shall be located within the distances indicated of any public street or road, any school or public park, or any dwelling (except such dwelling as may exist upon the same property with the restricted use):
1. 
Within one and one-half (1½) miles:
a. 
(Publisher's note: this item intentionally left blank.)
b. 
Farms or establishments for feeding of garbage or other refuse to hogs or other animals:
i. 
Provision is made that all such operations of subsections 1 and 2 shall be conducted in compliance with all state and county health regulations, and
ii. 
Complete protection from any potential detrimental effects such use might have on surrounding properties and/or use zones will be provided;
2. 
(Publisher's note: this item intentionally left blank.)
3. 
Within one hundred (100) feet: barns, shelters or other buildings or structures for keeping or feeding of any livestock, poultry, or other animals or birds whether wild or domestic;
4. 
Feedlots containing fifty (50) to one hundred (100) head at a density of less than five hundred (500) square feet per head for a period of six (6) months or more shall be located no closer than three hundred (300) feet to any existing home, school or park.
(Ord. 2005-05, 2005; Ord. 2013-001, 2013)

§ 17.28A.130 Existing residential exceptions.

Note: Former § 17.28A.130, derived from Ord. 2005-05; Ord. O-2006-01; Ord. 2007-22; Ord. 2009-25 and Ord. 2012-009, was repealed by Ord. 2013-001, 2013.
1. 
A portion of exterior wall assemblies that include insulation shall be allowed to project up to an additional eight inches into the setbacks on all sides.
2. 
A building shall be allowed to exceed the maximum allowable roof height by eight inches to accommodate additional insulation.
3. 
Gross floor area shall be measured from the interior face of the exterior walls, which includes drywall, as typically depicted on the architectural floor plans.
(Ord. 2026-004, 6/16/2026)

§ 17.28A.140 Repealed.

(Ord. 2007-22, 2007; Ord. 2013-001, 2013)