Zoneomics Logo
search icon

Melvindale City Zoning Code

ARTICLE VI

R-2, TWO-FAMILY RESIDENTIAL DISTRICT

Sec. 24-201.- Statement of purpose.

The R-2, two-family residential district, is established as a district in which the principal use of land is for two-family dwellings. For the R-2 residential district, in promoting the general purpose of this chapter, the specific intent of this section is: to encourage the construction of, and the continued use of the land for two-family dwellings; to prohibit business, commercial or industrial use of the land, and to prohibit any other use which would substantially interfere with development or continuation of single- and two-family dwellings in the district; to encourage the discontinuance of existing uses that would not be permitted as new uses under the provisions of this chapter; to discourage any land use which would generate traffic on minor or local streets other than normal traffic generated by the residences on those streets.

(Ord. No. 442, § 6.1, 8-19-81)

Sec. 24-202. - Principal permitted uses.

In the R-2 district, no uses shall be permitted unless otherwise provided in this chapter, except the following:

(1)

All principal permitted uses in the R-1 district subject to the terms and conditions therein.

(2)

Two-family dwellings.

(3)

Accessory buildings and uses customarily incidental to the above principal permitted uses.

(4)

Off-street parking in accordance with the requirements of article XVII.

(Ord. No. 442, § 6.2, 8-19-81)

Sec. 24-203. - Permitted uses after special approval.

The following uses shall be permitted subject to the conditions imposed in sections 24-119 and 24-413 and subject further to the approval of the planning commission:

(1)

All permitted uses after special approval in the R-1 district.

(2)

Boarding and lodging homes.

(Ord. No. 442, § 6.3, 8-19-81)

Sec. 24-204. - Site plan review.

Site plan review requirements are as provided in section 24-118.

(Ord. No. 442, § 6.4, 8-19-81)

Sec. 24-205. - Area, height, bulk, and placement requirements.

Area, height, bulk, and placement requirements, unless otherwise specified are as provided in section 24-411.

(Ord. No. 442, § 6.5, 8-19-81)