Boundaries of these districts are hereby established as shown on the maps entitled "Zoning Map—Village of Saukville, Wisconsin," and "Supplementary Floodland Zoning Map—Village of Saukville, Wisconsin," which maps accompany and are herein made a part of this chapter. All notations and references shown on the maps are a part of this chapter.[2] This chapter hereby incorporates any future changes or any later zoning maps that may be adopted by ordinance of the Village Board.

The district boundaries in all districts, except the C-1 Conservancy District, the FWO Floodway Overlay District, and the FFO Floodplain Fringe Overlay District, shall be construed to follow: corporate limits; U.S. Public Land Survey lines; lot or property lines, center lines of streets, highways, alleys, easements, and railroad rights-of-way or such lines extended.

Boundaries of the FWO Floodway Overlay District shall be determined by use of the scale contained on the Supplementary Floodland Zoning Map. The boundaries of the FFO Floodplain Fringe Overlay District shall be determined by the floodland limits shown on the Supplementary Floodland Zoning Map. The flood stages, under floodway conditions, contained on the Supplementary Floodland Zoning Map were developed from technical data contained in the Flood Insurance Rate Maps from the most current Federal Emergency Management Agency (FEMA) sources. Where a conflict exists between the floodland limits as shown on the Supplementary Floodland Zoning Map and actual field conditions, the elevations from the one-hundred-year recurrence interval flood profile shall be the governing factor in locating the regulatory floodland limits.

Boundaries of the C-1 Conservancy District based on the Wisconsin Wetland Inventory Maps for the Village of Saukville, dated February 4, 1986, and stamped "FINAL," include, but are not limited to, all shoreland wetlands, five acres or greater in area shown on those maps. The Village of Saukville reserves the right to undertake engineering and surveying activities necessary to facilitate timely updates identifying or defining wetlands within its corporate boundaries and to make any subsequent requests to the appropriate state and federal agencies for review and concurrence.

Annexation containing floodlands shall be governed by the provisions of the Ozaukee County Floodplain Zoning Ordinance until such time that the Wisconsin Department of Natural Resources (DNR) certifies that amendments to the Village of Saukville Zoning Ordinance meet the requirements of Chapter NR 116 of the Wisconsin Administrative Code.

Annexation containing shorelands. Pursuant to § 59.692(7), Wis. Stats., any annexation of land after May 7, 1982, which lies within shorelands, as defined herein, shall be governed by the provisions of the Ozaukee County Shoreland Zoning Ordinance until such time that the Village adopts an ordinance which is at least as restrictive as the Ozaukee County Shoreland Zoning Ordinance. Said regulations shall be administered and enforced by the Village of Saukville Zoning Administrator.

General agriculture, including floriculture, forestry, hay, orchards, truck farming, and viticulture.

Existing dwellings not accessory to any farm operation or a dwelling remaining after farm consolidation.

Essential services.

Ground-mounted electric-power-generating photovoltaic solar panel array and connector equipment with a nameplate generating capacity not exceeding 500 kW.

Keeping, breeding and raising of domestic stock for purposes incidental to the principal use of the premises subject to the following limitations:

Accessory uses and structures per § 205-71D, E, and F.

One farm dwelling per operating farm.

Satellite dish antennas up to one meter in diameter located in the rear yard.

Roof-mounted solar collectors which do not detract from the appearance of the structure, provided that the location of the collector is approved by the Architectural Review Board.

See §§ 205-55 and 205-58.

Lots shall have a minimum area of five acres and shall be not less than 300 feet in width.

Lots with existing nonfarm dwellings or lots with dwellings remaining after farm consolidation shall provide a minimum lot area of 40,000 square feet and shall be not less than 150 feet in width.

No dwelling or part of a dwelling shall exceed 35 feet in height. Other accessory buildings shall not exceed 15 feet in height.

The total minimum floor area of a dwelling shall be 1,600 square feet.

The minimum first floor area of a bilevel or two-story dwelling shall be 1,000 square feet.

A trilevel dwelling shall have a minimum living area of 550 square feet per level.

There shall be a minimum setback of 50 feet from the street right-of-way.

There shall be a side yard on each side of all buildings of not less than 25 feet in width.

There shall be a rear yard of not less than 25 feet.

Single-family dwellings.

Community living arrangements as defined in § 46.03(22), Wis. Stats, which have a capacity for eight or fewer persons; a foster home, as defined in § 48.02(6), Wis. Stats.; a treatment foster home, as defined in § 48.02(17q), Wis. Stats.; day-care facilities, as defined in § 48.65, Wis. Stats. or an adult family home, as defined in § 50.01(1), Wis. Stats., all subject to the limitations set forth in § 62.23(7)(i), Wis. Stats.

Essential services.

Private garages and carports.

Gardening, tool, and storage sheds in the rear yard; doghouses and permanent recreational structures incidental to the residential use in the rear yard; gazebos, decks, arbors, and pergolas.

Satellite dish up to one meter in diameter located in the rear yard.

Roof-mounted solar collectors which do not detract from the appearance of the structure, provided that the location of the collector is approved by the Architectural Review Board.

See §§ 205-55, 205-56, and 205-58.

No principal building or part of a principal building shall exceed 35 feet in height. No accessory building shall exceed 15 feet in height.

The total minimum floor area of a principal building shall be 1,600 square feet.

The minimum first floor area of a bilevel or two-story dwelling shall be 1,000 square feet.

A trilevel dwelling shall have a minimum living area of 550 square feet per level.

There shall be a minimum setback of 35 feet from the street right-of-way.

There shall be a side yard on each side of all buildings of not less than 15 feet in width.

There shall be a rear yard of not less than 25 feet.

To encourage a single-family residential environment that is compatible with the residential character of the Village, building permits for permitted uses in the R-1 Single-Family Residential District shall not be issued without review and approval of the Village of Saukville Architectural Review Board in accoudance with the guidelines set forth in §205-96 of this chapter. Said review and approval shall be concerned with general layout, building plans, ingress, egress, parking, landscaping, and open space utilitization.

Single-family dwellings.

Community living arrangements as defined in § 46.03(22), Wis. Stats, which have a capacity for eight or fewer persons; a foster home, as defined in § 48.02(6), Wis. Stats.; a treatment foster home, as defined in § 48.02(17q), Wis. Stats.; day-care facilities, as defined in § 48.65 Wis. Stats.; or an adult family home, as defined in § 50.01(1), Wis. Stats., all subject to the limitations set forth in § 62.23(7)(i), Wis. Stats.

Essential services.

Private garages and carports.

Gardening, tool, and storage sheds in the rear yard; doghouses and permanent recreational structures incidental to the residential use, in the rear yard; gazebos, decks, arbors, and pergolas.

Satellite dish antennas up to one meter in diameter located in the rear yard.

Roof-mounted solar collectors which do not detract from the appearance of the structure, provided that the location of the collector is approved by the Architectural Review Board.

See §§ 205-55, 205-56, and 205-58.

No principal building or part of a principal building shall exceed 35 feet in height. No accessory building shall exceed 15 feet in height.

The total minimum floor area of a principal building shall be 1,400 square feet.

The minimum first floor area of a bilevel or two-story dwelling shall be 1,000 square feet.

A trilevel dwelling shall have a minimum living area of 450 square feet per level.

There shall be a minimum setback of 35 feet from the street right-of-way.

There shall be a side yard on each side of all buildings of not less than 10 feet in width.

There shall be a rear yard of not less than 25 feet.

Single-family dwellings.

Community living arrangements as defined in § 46.03(22), Wis. Stats, which have a capacity for eight or fewer persons; a foster home, as defined in § 48.02(6), Wis. Stats.; a treatment foster home, as defined in § 48.02(17q), Wis. Stats.; day-care facilities, as defined in § 48.65, Wis. Stats.; or an adult family home, as defined in § 50.01(1), Wis. Stats., all subject to the limitations set forth in § 62.23(7)(i), Wis. Stats.

Essential services.

Private garages and carports.

Gardening, tool, and storage sheds in the rear yard; doghouses and permanent recreational structures incidental to the residential use, in the rear yard; gazebos, decks, arbors, and pergolas.

Satellite dish antennas up to one meter in diameter located in the rear yard.

Roof-mounted solar collectors which do not detract from the appearance of the structure, provided that the location of the collector is approved by the Architectural Review Board.

See §§ 205-55, 205-56, and 205-58.

No principal building or part of a principal building shall exceed 35 feet in height. No accessory building shall exceed 15 feet in height.

The total minimum floor area of a principal building shall be 1,200 square feet.

The minimum first floor area of a bilevel or two-story dwelling shall be 800 square feet.

A trilevel dwelling shall have a minimum living area of 400 square feet per level.

There shall be a minimum setback of 35 feet from the street right-of-way.

There shall be a side yard on each side of all buildings of not less than six feet in width.

There shall be a rear yard of not less than 25 feet.

Two-family dwellings.

Community living arrangements as defined in § 46.03(22), Wis. Stats, which have a capacity for eight or fewer persons; a foster home, as defined in § 48.02(6), Wis. Stats.; a treatment foster home, as defined in § 48.02(17q), Wis. Stats.; day-care facilities, as defined in § 48.65, Wis. Stats.; or an adult family home, as defined in § 50.01(1), Wis. Stats., all subject to the limitations set forth in § 62.23(7)(i), Wis. Stats.

Essential services.

Attached garages shall be provided at a rate of one per unit but not less than three per building.

Gardening, tool, and storage sheds in the rear yard; doghouses and permanent recreational structures incidental to the residential use, in the rear yard; gazebos, decks, arbors, and pergolas.

Satellite dish antennas up to one meter in diameter located in the rear yard.

Roof-mounted solar collectors which do not detract from the appearance of the structure, provided that the location of the collector is approved by the Architectural Review Board.

See §§ 205-55, 205-56 and 205-58.

No principal building or part of a principal building shall exceed 35 feet in height. No accessory building shall exceed 15 feet in height.

The total minimum floor area of a principal building shall be 1,200 square feet per dwelling unit.

The minimum first floor area of a two-family structure shall be 1,200 square feet.

There shall be a minimum setback of 35 feet from the street right-of-way.

There shall be a side yard on each side of all buildings of not less than six feet in width.

There shall be a rear yard of not less than 25 feet.

Multifamily dwellings; 50% brick or natural stone exteriors.

Community living arrangements as defined in § 46.03(22), Wis. Stats, which have a capacity for 15 or fewer persons; a foster home, as defined in § 48.02(6), Wis. Stats.; a treatment foster home, as defined in § 48.02(17q), Wis. Stats.; day-care facilities, as defined in § 48.65, Wis. Stats.; or an adult family home, as defined in § 50.01(1), Wis. Stats., all subject to the limitations set forth in § 62.23(7)(i), Wis. Stats.

Essential services.

Attached garages or underground parking shall be provided at a rate of one space per unit.

Gardening, tool, and storage sheds and permanent recreational structures incidental to the residential use in the rear yard or site interior courtyard; gazebos, decks, arbors and pergolas.

Outside parking shall be provided at the rate of one space per unit. Parking shall not be located in the building setback area. A compact landscaping hedge, random landscaping screen or landscaped undulating berm shall be located directly adjacent to parking and driveway areas facing public streets. Adequate space shall be left between the landscaping material and the edge of the parking lot for snow storage and removal. Parking lots, including aisles, in the Multifamily Residential District shall be set back a minimum of 25 feet from any single-or two-family residential side or rear lot line.

See §§ 205-55, 205-56 and 205-58.

Lots shall be a minimum of 22,000 square feet in area, and no dwelling unit shall have a lot area of less than the following:

No lot shall be less than 110 feet in width. Corner lots shall be not less than 130 feet in width.

No principal building or part of a principal building shall exceed 35 feet in height. No accessory building shall exceed 15 feet in height.

The total minimum floor area of a principal building shall be as follows:

There shall be a minimum setback of 50 feet from the street right-of-way.

There shall be a side yard on each side of all buildings of not less than 15 feet in width.

There shall be a rear yard of not less than 25 feet.

Condominium residential dwellings.

Essential services.

Attached garages or underground parking shall be provided at a rate of two spaces per unit.

Outside guest parking shall be provided at the rate of 1/2 space per unit. Surface parking within setbacks shall not exceed 25% of the required individual building setback areas. A compact landscaping hedge or random landscaping screen shall be located directly adjacent to parking and driveway areas facing public streets. Adequate space shall be left between the landscaping material and the edge of the parking lot for snow storage and removal. Parking lots, including aisles, in the Condominium Residential District shall be set back a minimum of 25 feet from any single-family residential side or rear lot line.

Common and private area gardening, tool, and storage sheds; gazebos, decks, arbors, and pergolas; and permanent recreational structures incidental to the residential use, in the rear yard or site interior courtyard.

Lots shall be a minimum of 40,000 square feet in area, and no dwelling unit shall have a lot area of less than the following:

No lot shall be less than 150 feet in width. Corner lots shall be not less than 200 feet in width.

No principal building or part of a principal building shall exceed 35 feet in height. No accessory building shall exceed 15 feet in height.

The total minimum floor area of a principal building shall be as follows:

There shall be a minimum setback of 50 feet from the street right-of-way.

There shall be a side yard on each side of all buildings of not less than 15 feet in width.

There shall be a rear yard of not less than 25 feet.

There shall be a minimum of 30 feet between buildings.

Appliance stores.

Art galleries.

Bakeries.

Banks, savings and loan associations, and other financial institutions.

Barbershops.

Beauty shops.

Book or stationery stores.

Business offices.

Camera and photographic supply stores.

Clinics.

Clothing stores.

Confectioneries, soda fountains, and ice cream stores.

Delicatessens.

Department stores.

Drugstores.

Electronic equipment sales, service, and repair.

Florists.

Furniture stores.

Furriers and fur apparel.

Gift stores.

Grocery stores and specialty food stores.

Hardware stores.

Hobby and craft shops.

Hotels and motels.

Insurance sales offices.

Interior decorators.

Jewelry stores.

Law offices.

Lodges and clubs.

Music stores.

Newspaper and magazine stores.

Office supplies and business machine stores.

Optical stores.

Packaged beverage stores.

Paint, glass, and wallpaper stores.

Parking lots and structures.

Physical fitness centers.

Plumbing and heating supplies.

Professional offices.

Public utility offices.

Publishing houses.

Radio and television broadcast studios without transmitting and receiving towers.

Real estate sales offices.

Restaurants, except drive-in restaurants.

Self-service laundry and dry-cleaning establishments.

Shoe stores and leather goods stores.

Sporting goods stores.

Studios for photography, painting, music, sculpture, dance, or other recognized fine art.

Tailor or dressmaking shops.

Taverns and cocktail lounges.

Theaters.

Tobacco stores.

Travel agency.

Variety stores.

Videotape sales and rental.

Garages used for storage of vehicles used in conjunction with the operation of the business.

Off-street parking and loading area.

Residential quarters for the owner, proprietor, commercial tenant, employee or caretaker located in the same building as the business.

Rental efficiency, one-bedroom, and two-bedroom apartments located in the rear of a business establishment or on a non-ground level, provided that there shall be a minimum floor area of 350 square feet for an efficiency apartment, 500 square feet for a one-bedroom apartment, and 600 square feet for a two-bedroom apartment.

Satellite dish antennas up to two feet in diameter located in the rear yard.

See §§ 205-55 B, C, and D, 205-57 and 205-62.

No principal building or parts of a principal building shall exceed 35 feet in height. No accessory building shall exceed 15 feet in height.

No minimum setback shall be required.

No minimum side yard is required, except as provided in § 205-20D of this chapter.

There shall be a rear yard of not less than 25 feet.

Appliance stores.

Art galleries.

Bakeries.

Banks, savings and loan associations, and other financial institutions.

Barbershops.

Beauty shops.

Book or stationery stores.

Business offices.

Camera and photographic supply stores.

Clinics.

Clothing stores.

Confectioneries, soda fountains, and ice cream stores.

Delicatessens.

Department stores.

Drugstores.

Electronic equipment sales, service, and repair.

Florists.

Furniture stores.

Furriers and fur apparel.

Gift stores.

Grocery stores and specialty food stores.

Hardware stores.

Hobby and craft shops.

Insurance sales offices.

Interior decorators.

Jewelry stores.

Law offices.

Music stores.

Newspaper and magazine stores.

Office supplies and business machine stores.

Optical stores.

Packaged beverage stores.

Paint, glass, and wallpaper stores.

Parking lots and structures.

Physical fitness centers.

Plumbing and heating supplies.

Professional offices.

Public utility offices.

Publishing houses.

Radio and television broadcast studios, not including transmitting towers.

Real estate sales offices.

Restaurants, except drive-in restaurants.

Laundry and dry-cleaning establishments.

Shoe stores and leather goods stores.

Soda fountains and ice cream stores.

Sporting goods stores.

Tailor or dressmaking shop.

Taverns and cocktail lounges.

Theaters.

Tobacco stores.

Travel agency.

Variety stores.

Videotape sales and rental.

Garages used for storage of vehicles used in conjunction with the operation of the business.

Off-street parking and loading area.

Satellite dish antennas up to two feet in diameter located in the rear yard.

Roof-mounted solar collectors which do not detract from the appearance of the structure, provided that the location of the collector is approved by the Plan Commission.

Resale retail operations, secondhand stores, pawn shops or any retail establishment with a majority of trade or business involving refurbished or used merchandise.

See §§ 205-55B, C, and D, 205-57 and 205-62.

Shopping centers shall contain a minimum area of four acres and shall be not less than 200 feet in width.

Individual business sites in the B-2 Business District shall provide sufficient area for the principal building and its accessory buildings, off-street parking and loading areas, and required yards. There is no minimum required site width.

No principal building or parts of a principal building shall exceed 35 feet in height. No accessory building shall exceed 15 feet in height.

There shall be a minimum building setback of 35 feet from the right-of-way of all streets.

There shall be a side yard on each side of all buildings of not less than 35 feet.

There shall be a rear yard of not less than 35 feet.

Administrative and public service offices.

Professional offices of an architect, engineer, landscape architect, lawyer, accountant, doctor, Christian Science practitioner, dentist, optometrist, clergy, or other similarly recognized profession.

Studios for photography, painting, music, sculpture, dance, or other recognized fine art.

Banks, savings and loan, and other financial institutions.

Barbershops and beauty shops.

Interior decorators.

Medical clinics.

Parking lots and structures.

Real estate and insurance sales offices.

Garages used for storage of vehicles used in conjunction with the operation of the business.

Off-street parking and loading areas.

Residential quarters for the owner, proprietor, commercial tenant, employee or caretaker located in the same building as the business.

Rental efficiency, one-bedroom, and two-bedroom apartments located in the rear of a business establishment or on a non-ground level, provided that there shall be a minimum floor area of 350 square feet for an efficiency apartment, 500 square feet for a one-bedroom apartment, and 600 square feet for a two-bedroom apartment.

Satellite dish antenna up to two feet in diameter located in the rear yard.

Roof-mounted solar collectors which do not detract from the appearance of the structure, provided that the location of the collector is approved by the Plan Commission.

Resale retail operations, secondhand stores, pawn shops or any retail establishment with a majority of trade or business involving refurbished or used merchandise.

See §§ 205-55B, C and D, and 205-57.

No principal building or parts of a principal building shall exceed 35 feet in height. No accessory building shall exceed 15 feet in height.

There shall be a minimum building setback of 35 feet from the right-of-way of all streets.

There shall be a side yard on each side of all buildings of not less than eight feet.

There shall be a rear yard of not less than 25 feet.

Any use permitted in the B-2 Business District.

Automotive, marine, and aircraft sales and service.

Banks, savings and loan, and other financial institutions, including drive-in facilities.

Bowling alleys.

Building supply stores; excluding lumberyards.

Commercial day-care centers.

Convenience food store.

Equipment and motor vehicle rental facilities.

Indoor tennis and racquetball courts and physical fitness centers.

Garden centers.

Hotels and motels.

Photography and art studios.

Restaurants, including drive-in and drive-through restaurants.

Garages used for storage of vehicles used in conjunction with the operation of the business.

Off-street parking and loading area.

Satellite dish antennas up to two feet in diameter located in the rear yard.

Roof-mounted solar collectors which do not detract from the appearance of the structure, provided that the location of the collector is approved by the Plan Commission.

Canopies or facilities permanently fixed or anchored to the ground and used for the pick-up or return of supplies or equipment in conjunction with the operation of a permitted use.

Resale retail operations, secondhand stores, pawn shops or any retail establishment with a majority of trade or business involving refurbished or used merchandise.

See §§ 205-55B, C, and D, 205-57 and 205-62.

There shall be a minimum building setback of 35 feet from the right-of-way of all streets.

There shall be a side yard on each side of all buildings of not less than 20 feet.

There shall be a rear yard of not less than 25 feet.

Light manufacturing and warehousing as provided in the M-1 District and biotechnology-derived products.

Corporate headquarters, manufacturing offices, sales offices and distribution centers.

Professional, business, financial, insurance, and real estate services.

Government and public service offices, including fire stations.

Park-and-ride lots.

Day-care centers.

Commercial activities when the Industrial Development Committee finds that the activity will directly support the business park.

Any other use which the Industrial Development Committee finds will be similar in nature, operation and function to uses allowed within the district.

Water wells, water pumping stations, water reservoirs and water towers.

Garages used for storage of vehicles used in conjunction with the operation of the business.

Off-street parking and loading areas.

Office, power supply, and other uses normally auxiliary to the principal operation.

Ground-mounted and building-mounted earth station dish and terrestrial antennas, including cellular and wireless technologies.

Essential services.

Roof-mounted solar collectors which do not detract from the appearance of the structure.

Any use prohibited in the M-1 District.

Outdoor storage of equipment and inventory, except where permitted as a conditional use pursuant to § 205-58J of this chapter.

Truck terminals.

Heavy manufacturing and any operation that produces objectionable noises or odors.

Lots shall have a minimum of 40,000 square feet in area.

Lots shall be not less than 200 feet in width.

No principal building or parts of a principal building shall exceed 50 feet in height.

No accessory building shall exceed 15 feet in height.

The minimum area of the building shall be 7.5% of the lot area or 5,000 square feet, whichever is greater. This minimum building area shall not apply to publicly owned buildings.

The sum total of all buildings shall not occupy more than 50% of the lot area.

There shall be a minimum building setback of 50 feet from the street right-of-way of all streets.

There shall be a side and rear yard of not less than 25 feet.

All buildings shall be brick, stone, decorative concrete block, precast concrete panels, cast-in-place concrete panels, or glass walls.

No parking shall be allowed in the fifty-foot setback area in front of the building. All employee parking shall be located on the side or rear of the building and paved before occupancy.

All loading docks shall be located on the side or rear of the building.

All dumpsters shall be screened by a six-foot high fence and located behind the building.

The minimum landscaping for any privately owned building in the business park shall be based on the square footage of land developed minus the area of the proposed building. This development area shall be called the "net developed area."

A credit may be given for existing wooded area, ponds or other existing landscaping features equal to a maximum of 50% of the required number of trees and shrubs.

At least 15% of the required minimum number of trees shall be evergreens.

All parking lots with 10 or more stalls shall have at least 5% of the interior parking and driveway area landscaped. The minimum size of each landscaped area shall be 100 square feet. The landscaped area shall be located in a manner that breaks up the expanse of paving throughout the parking lot.

The minimum amount of required landscaping for a privately owned building shall be distributed in the development as required to provide an attractive place to work. There is no minimum amount of landscaping required for a publicly owned building although the Industrial Review Committee shall ensure that there is sufficient landscaping for a publicly owned building to provide an attractive appearance.

Automotive body repair.

Automotive upholstery and automotive accessories.

Apparel and findings, and related products.

Automatic temperature controls.

Blank books, loose-leaf binders, and binding devices.

Books: publishing, printing and binding.

Brooms and brushes.

Candy and confectionery products.

Cereal preparations.

Cleaning, dressing and dyeing.

Commercial bakery.

Commercial greenhouses.

Costume jewelry, buttons, and miscellaneous notions.

Curtains and draperies.

Dental equipment and supplies.

Dress and work gloves.

Electrotyping and stereotyping.

Electrical appliances.

Electronic devices.

Engineering, laboratory, scientific, and research instruments and related equipment.

Envelopes.

Fabric, broad and narrow woven.

Felt goods.

Flavor extracts and flavor syrups.

Floor coverings limited to rugs and carpeting.

Food locker plants.

Footwear.

Fresh or frozen fruits, fruit juices, vegetables and specialties.

Glass manufacturing.

Greeting cards.

Handbags and other personal leather goods.

Hats, caps, and millinery.

Household furniture and furnishings.

Ice.

Ice cream and frozen desserts.

Jewelry manufacturing.

Knit goods.

Laboratories.

Lace goods.

Lamp shades.

Leather fabrication, not including tanning.

Luggage.

Macaroni, spaghetti, vermicelli, and noodles.

Machine shops.

Manifold business forms.

Manufacturing and bottling of nonalcoholic beverages.

Mechanical measuring and controlling instruments.

Men's, youths', and boys' furnishings, work clothing and allied garments.

Morticians' goods.

Musical instruments and parts.

Newspapers: publishing and printing.

Office furniture.

Ophthalmic goods.

Optical instruments and lenses.

Orthopedic, prosthetic, and surgical appliances and supplies.

Packaging and assembly of products made from fur.

Paper coating and glazing.

Partitions, shelving, lockers, and office and store fixtures.

Pens, pencils, and other office and artist materials.

Periodicals: publishing and printing.

Pharmaceutical processing.

Photoengraving instruments and apparatus.

Photographic equipment and supplies.

Pleating, decorative and novelty stitching and tucking for the trade.

Pressed and molded pulp goods.

Printing and publishing.

Raincoats and other waterproof outer garments.

Rice milling.

Robes and dressing gowns.

Sanitary paper products.

Self-service storage facilities (mini warehouses).

Sexually oriented businesses as defined in Chapter 161 of the Municipal Code, if such businesses meet the location, building, site, operational and all other requirements of said Chapter 161.

Sign and other advertising display manufacturing.

Silverware and plated ware.

Surgical and medical instruments and apparatus.

Textiles, dyeing and finishing.

Tire cord and fabric.

Toys, amusement, sporting and athletic goods.

Typesetting.

Umbrellas, parasols, and canes.

Venetian blinds and shades.

Wallpaper.

Warehousing.

Watches, clocks, clockwork-operated devices and parts.

Wholesaling.

Women's, misses', juniors', girls', and infants' furnishings, work and dress garments.

Wool scouring, worsted combing, and towing to top.

Yarns and threads.

Off-street parking and loading areas.

Office, storage, power supply, and other uses normally auxiliary to the principal industrial operation.

Residential quarters for the owner or caretaker.

Satellite dish antennas over two feet in diameter located in the rear yard.

Roof-mounted solar collectors which do not detract from the appearance of the structure, provided that the location of the collector is approved by the Industrial Review Committee.

A factory outlet store bearing the appearance of a retail establishment located within the manufacturing facility and selling products assembled, processed or manufactured on the premises.

See §§ 205-55, 205-57, 205-58 and 205-62.

Manufacturing of ammonia, asbestos, asphalt, cement, chlorine, coal tar, creosote, explosives, fertilizer, glue, gypsum, insecticide, lampblack, poison, pulp, pyroxylin, and radium.

Processing ammonia, asbestos, asphalt, cabbage, chlorine, coal tar, creosote, explosives, fertilizer, fish, glue, grease, gypsum, insecticides, lampblack, offal, poison, pulp, pyroxyline, and radioactive materials.

Storage of bulk fertilizer, explosives, gasoline in excess of 50,000 gallons, grease, and radioactive materials.

Animal reduction facilities, forges, foundries, garbage incinerators, junkyards, rubbish storage, slaughterhouses, stockyards, and tanneries.

No principal building or parts of a principal building shall exceed 35 feet in height. No accessory building shall exceed 15 feet in height.

The minimum area of the principal manufacturing building shall be a minimum of 7.5% of the lot area or 5,000 square feet, whichever is smaller.

The sum total of all buildings shall not occupy more than 50% of the lot area.

There shall be a minimum building setback of 50 feet from the right-of-way of all streets.

There shall be a side yard on each side of all buildings of not less than 25 feet.

There shall be a rear yard of not less than 25 feet.

Those uses permitted in the M-1 Limited Manufacturing District.

Auto body repair, engine repair.

Automobile, marine, and aircraft manufacturing.

Coating, engraving, and allied services.

Construction, mining, and materials handling machinery and equipment; manufacturing and repair of.

Cutlery, hand tools, and general hardware manufacturing.

Electric lighting and wiring equipment manufacturing.

Electrical industrial apparatus manufacturing.

Electrical transmission and distribution equipment manufacturing.

Electrometallurgical products manufacturing.

Engine and turbine manufacturing.

Farm machinery and equipment manufacturing.

Fine earthenware, table, and kitchen articles manufacturing.

Glass and glass container manufacturing.

Heating apparatus and plumbing fixtures manufacturing.

Household appliance manufacturing.

Inflammable gases and liquids storage, not to exceed 50,000 gallons.

Metal container manufacturing.

Metal products manufacturing, fabricating, and distribution.

Motorcycle and bicycle manufacturing.

Nonhazardous chemical manufacturing, processing, or use.

Office, computing, and accounting machine manufacturing.

Small arms ammunition manufacturing.

Screw machine products, bolts, nuts, screws, rivets, and washer manufacturing.

Signaling and fire control equipment manufacturing.

Wire products manufacturing.

Garages used for storage of vehicles used in conjunction with the operation of the business.

Off-street parking and loading areas.

Office, storage, power supply, and other uses normally auxiliary to the principal industrial operation.

Residential quarters for the owner or caretaker.

Satellite dish antennas over two feet in diameter located in the rear yard.

Roof-mounted solar collectors which do not detract from the appearance of the structure, provided that the location of the collector is approved by the Industrial Review Committee.

A factory outlet store bearing the appearance of a retail establishment located within the manufacturing facility and selling products assembled, processed or manufactured on the premises.

See §§ 205-56, 205-57, 205-58 and 205-62.

Manufacturing of ammonia, asbestos, asphalt, cement, chlorine, coal tar, creosote, explosives, fertilizer, glue, gypsum, insecticide, lampblack, poison, pulp, pyroxyline, and radium.

Processing ammonia, asbestos, asphalt, cabbage, chlorine, coal tar, creosote, explosives, fertilizer, fish, glue, grease, gypsum, insecticides, lampblack, offal, poison, pulp, pyroxyline, and radioactive materials.

Storage of bulk fertilizer, explosives, gasoline in excess of 50,000 gallons, grease, and radioactive materials.

Animal reduction facilities, forges, foundries, garbage incinerators, junkyards, rubbish storage, slaughterhouses, stockyards, and tanneries.

No principal building or parts of a principal building shall exceed 120 feet in height. No accessory building shall exceed 15 feet in height.

The minimum area of the principal manufacturing building shall be a minimum of 7.5% of the lot area or 5,000 square feet, whichever is smaller.

The sum total of all buildings shall not occupy more than 50% of the lot area.

There shall be a minimum building setback of 50 feet from the right-of-way of all streets.

There shall be a side yard on each side of all buildings of not less than 25 feet.

There shall be a rear yard of not less than 25 feet.

Public or private schools, colleges, and universities.

Places of worship.

Hospitals, sanatoriums, nursing homes, and clinics.

Libraries, community centers, museums, and public art galleries.

Public administrative offices, and public service buildings, including fire and police stations.

Public utility offices.

Wastewater treatment plants, sewage lift stations, wells, water treatment plants, water pumping stations, and water reservoirs.

Residential quarters for caretakers or clergy.

Garages for storage of vehicles used in conjunction with the operation of a permitted use.

Service buildings and facilities normally accessory to the permitted use.

Satellite dish antennas up to one meter in diameter located in the rear yard.

Roof-mounted solar collectors which do not detract from the appearance of the structure, provided that the location of the collector is approved by the Plan Commission.

See §§ 205-55, 205-56, 205-57 and 205-58.

No principal building or part of a principal building shall exceed 35 feet in height. No accessory building shall exceed 15 feet in height.

Residential uses permitted in the I-1 District shall comply with the building area requirements of the R-2 Single-Family Residential District.

There shall be a minimum setback of 35 feet from the street right-of-way.

There shall be a side yard on each side of all buildings not less than six feet in width.

There shall be a rear yard of not less than 25 feet.

Archery range.

Botanical gardens and arboretums.

Exhibition halls.

Fairgrounds.

Golf courses without country club facilities.

Historic monuments or sites.

Hiking, biking, and nature trails.

Neighborhood tot lots.

Outdoor skating rinks.

Parks and playgrounds.

Picnicking areas.

Playfields or athletic fields.

Public art galleries.

Sledding, skiing or tobogganing.

Swimming beaches.

Swimming pools.

Tennis courts.

Buildings accessory to the permitted use.

Roof-mounted solar collectors which do not detract from the appearance of the structure, provided that the location of the collector is approved by the Plan Commission.

See §§ 205-55, 205-58 and 205-59.

A minimum building setback of 40 feet from the right-of-way line of all public streets shall be required. A minimum building setback of 40 feet from all lot lines shall be required.

Spacing requirements between buildings, accessory structures and other structures, and additional yard and setback requirements shall comply with all applicable codes and ordinances and be reviewed by Plan Commission.

Hiking, fishing, snowmobiling and boating, unless prohibited by other laws and ordinances.

Harvesting of wild crops, such as marsh hay, ferns, moss, wild rice, berries, tree fruits and tree seeds, in a manner that is not injurious to the natural reproduction of such crops, and that does not involve filling, flooding, draining, dredging, ditching, tiling, or excavating.

Silviculture, including the planting, thinning, and harvesting of timber, provided that no filling, flooding, draining, dredging, ditching, tiling, or excavating is done except for temporary water level stabilization measures to alleviate abnormally wet or dry conditions which would have an adverse impact on silvicultural activities in not corrected.

Agricultural cultivation and pasturing, provided that the use does not involve extension of or creation of new drainage systems, and further provided that the use does not substantially disturb or impair the natural fauna, flora, topography, or water regimen.

Ditching, tiling, dredging, excavating, or filling done to maintain or repair an existing drainage system only to the extent necessary to maintain the level of drainage required to continue the existing use.

The construction and maintenance of piers, docks, and walkways, including those built on pilings.

The maintenance, repair, replacement, and reconstruction of existing streets, roads, and bridges.

See § 205-60.

Any use not listed as a permitted use or a conditional use is prohibited unless the C-1 District lands concerned are first rezoned into another district.

The use of a boathouse for human habitation and the construction or placement of a boathouse or fixed houseboat below the ordinary high-water mark of any navigable water are prohibited.

Lot area. Requirements specified in the underlying district shall apply.

Lot width. Requirements specified in the underlying district shall apply.

The minimum building setback shall be 25 feet from the right-of-way of all streets.

The side yard and rear yard setbacks shall meet the minimum requirements of the firesafety and commercial building codes of the Village of Saukville but in no case shall be less than eight feet for principal structures nor less than one foot for accessory structures.

The aggregate area per lot of all buildings plus impervious surface shall not exceed 90% of the lot. Exceptions may be approved by the Plan Commission whereby site stormwater ponds, biofiltration or rain garden design elements which meet stormwater management requirements may be substituted for required landscaping at a 1:1 ratio.

Impervious surfaces shall be set back a minimum of five feet from any lot line, except where neighboring properties have shared access and/or shared parking easements of record.

Principal building heights may not exceed 60 feet, or four full stories, in height. Accessory building heights shall meet the requirements of the underlying district.

Landscaping and buffers. A minimum landscaping area not less than five feet in width shall separate all impervious surfaces from the public way except where an architecturally compatible decorative wall (brick, stone or other decorative masonry) of at least 2 1/2 feet in height is approved by the Plan Commission. All lot lines shall be delineated by vegetative landscaping or an approved landscaping feature.

Parking.

Storage and display. No required setback abutting the public way shall be used for outdoor storage. Outdoor storage of materials and large equipment shall be screened by walls, fencing and/or plantings approved by the Plan Commission. Storage of outdoor refuse and recycling shall be contained in an enclosure comprised of substantially the same materials as that of the principal structure. Seasonal outdoor displays are subject to the requirements for temporary uses as set forth in § 205-21F.

Signs. All signs permitted in the underlying zoning districts may also be permitted within the STH 33 Setback Overlay District. Monument signs, marquis signs, pylon signs and pole signs are permitted with a minimum setback of six feet from any abutting public right of way. Ground signs must incorporate a masonry base and a landscaped planting area of not less than 20% of the total sign face area. Interstate highway pole or pylon signs may not exceed 70 feet in height and must comply with all other requirements of this chapter. All district signage must comply with the traffic visibility requirements as set forth in § 205-63.

Open space amenities required in the district shall be comprised of the following:

Outdoor seating. Provide at least two seating arrangements on site in the form of freestanding outdoor benches or seating incorporated into low walls, raised planters or building foundations. Low walls or planter edges to be used for seating shall be at least eight inches wide and 18 inches high.

Accessory site furnishings. Waste receptacles, public telephones, movable planters and other accessory site furnishings shall be of compatible design and located so as not to obstruct pedestrian or vehicular access along sidewalks and to businesses.

Open space amenities shall not be impacted by shadows from signs, nor shall the views into or from these areas be blocked by signage. All open space amenities shall be designed to complement district-wide architectural standards and regularly maintained by the property owner.

Uses permitted in a Planned Unit Development Overlay District shall conform to uses generally permitted in the underlying basic use district. Individual structures shall comply with the specific building area and height requirements of the underlying basic use district. All open space and parking requirements of the underlying basic use district shall be complied with either individually or by providing the combined open space and parking space required for the entire development in one or more locations within the development.

Areas designated as Planned Unit Development Overlay Districts shall be under single or, by agreement, joint or corporate ownership and control, and shall contain a minimum development area of:

Prepetition conference. Prior to the official submission of the petition for the approval of a Planned Unit Development Overlay District, the owner(s) or designee(s) making such petition shall meet with the Village Plan Commission or its staff to discuss the scope and proposed nature of the contemplated development.

Petition. Following the prepetition conference, owner(s) or designee(s) may file a petition with the Village Clerk for approval of a Planned Unit Development Overlay District. Such petition shall be accompanied by a review fee, as required by the Village Board pursuant to § 205-23 of this chapter, and the following information:

Approval of the petition. The Village Plan Commission shall hold a public hearing regarding the PUD petition and plan elements pursuant to the requirements of Articles XV and XVI of this chapter. Notice for such hearing shall include reference to the development plans filed in conjunction with the requested Planned Unit Development Overlay District. Following a review of the general plan statement, specific implementation plan, and any other requested information, and a determination as to whether or not the proposal is compatible with the Village's adopted Comprehensive Plan, the Village Plan Commission shall recommend to the Village Board that the petition be approved as submitted, approved with modifications, referred back to the petitioner for further modifications or disapproved. Upon receipt of the Plan Commission recommendation, the Village Board may approve the plan and authorize the development to proceed accordingly, or disapprove the plan and refer it back to the Plan Commission with specific objections for further negotiation with the developer. In the event the Village Board approves the specific implementation plan and adopts a zoning ordinance amendment designating a tract of land as a Planned Unit Development Overlay District, the owner or developer of such land shall provide the Zoning Administrator, within 12 months of the date of Village Board approval, with recordable copies of the approved general or specific implementation plan and all other written commitments and contractual agreements with the Village regarding project value, character and other pertinent factors, and a certified copy of the zoning ordinance amendment and any other formal action taken by the Village. The cost of preparing such recordable copies and the recording fees for all documents shall be paid by the owner or developer of the lands included in the Planned Unit Development Overlay District. Upon receipt of such recordable documents, the Zoning Administrator shall record them with the Ozaukee County Register of Deeds. No building permit may be issued prior to recording of the documents. If the specific implementation plan is not recorded within 12 months of the date of Village Board approval, the approval shall be null and void, and a new petition and approval process shall be required to obtain specific implementation approval. However, where the plans have not been altered from the Village Board’s prior approval and the time for recording the PUD specific implementation plan has expired, the Zoning Administrator may, after consultation with and approval from the Plan Commission, approve an extension for up to 24 months from the original expiration date. No alteration of a PUD specific implementation plan shall be permitted unless approved by the Plan Commission, although the Zoning Administrator may issue permits for minor alterations that are compatible with the concept approved by the Village Board and the provisions of this chapter.

In the case of a proposed residential Planned Unit Development Overlay District:

In the case of a proposed commercial Planned Unit Development Overlay District:

In the case of a proposed industrial Planned Unit Development Overlay District:

In the case of a mixed use Planned Unit Development Overlay District:

Is compact;

Is designed for the human scale;

Provides a mix of uses, including residential, commercial, civic, and open space uses in close proximity to one another within the neighborhood. Development of an appropriate mix of uses shall be carefully guided by the Village Plan Commission or Community Development Authority to optimize harmony and complementary uses emphasizing the identity of the district.

Provides a mix of housing styles, types, and sizes to accommodate households of all ages, sizes, and incomes;

Incorporates a system of relatively narrow, interconnected streets with sidewalks, bikeways, and transit that offer multiple routes for motorists, pedestrians, and bicyclists and provides for the connections of those streets to existing and future developments;

Retains existing buildings with historical features or architectural features that enhance the visual character of the community;

Incorporates significant environmental features into the design;

Is consistent with Saukville's Comprehensive Plan.

A general location map of suitable scale which shows the boundaries and dimensions of the property within the context of the Village and adjacent parcels, including locations of any public streets, railroads, major streams or rivers and other major features within 1,000 feet of the site, along with a legal description of the property.

A site inventory and analysis to identify site assets or resources, and constraints, including but not limited to floodplains, wetlands and soils classified as "poorly drained" or "very poorly drained," soils with bedrock at or within 42 inches of the surface, utility easements for high-tension electrical transmission lines (greater than 69 KV), slopes greater than 15%, and brownfields.

A site plan, including proposed topographic contours at one-foot intervals, with the following information:

A stormwater management plan for the site. The grading plan shall show existing and proposed ground elevations with contours (one-foot contour interval) and spot elevations at significant high points, low points, and transition points. The grading plan shall also note the finished ground floor elevations of all buildings. The plan shall also show the locations of all storm drainage sewers and structures, and infiltration or detention/retention structures; and all wetlands on the site, using the Federal Manual for Identifying and Delineating Jurisdictional Wetlands, and copies of documents completed in making the wetlands identification.

Detailed elevations of all proposed commercial buildings and typical elevations of residential buildings. Scaled elevations should identify all signs, building materials and percentage of ground floor commercial facade in windows; the location, height and material for screening walls and fences, including outdoor trash storage areas, electrical, mechanical and gas metering equipment, storage areas for trash and recyclable materials, and rooftop equipment.

A utilities plan showing underground and aboveground lines and structures for sanitary sewers, electricity, gas, telecommunications, etc.

A written report which completely describes the proposal and indicates covenants or agreements that will influence the use and maintenance of the proposed development. The report also shall describe the analysis of site conditions and the development objectives.

Phasing plans, where applicable.

Any other information deemed necessary by the Village Board in order to evaluate plans.

Ten copies of the above information shall be submitted, plus one reduced set no larger than 8 1/2 inches by 11 inches.

Increases or decreases of less than 10% in floor area of structures or number of dwelling units.

Change in exterior building material.

Alteration of any conditions attached or modification to the specific implementation plan made by the Village Board. A major change to a specific implementation plan which is less restrictive than any conditions of approval for the initial specific implementation plan shall require approval by the Village Board.

A certified copy of the zoning ordinance amendment designating a tract of land as a traditional neighborhood development;

The general implementation plan; and

The specific implementation plan.

Neighborhood uses. In order to achieve the proximity necessary to make neighborhoods walkable, it is important to mix land uses. A traditional neighborhood development should consist of a mix of residential uses, a mixed use area, and open space as provided below:

Development units. The number of residential dwelling units and the amount of nonresidential development, excluding open spaces, shall be determined as follows:

Open space. At least 10% to 20% of the gross acreage of the traditional neighborhood development must be open space. Open space may include undevelopable areas such as steep slopes, wetlands, and stormwater detention and retention basins. At least 25% of the open space must be common open space dedicated to the public for parkland. Ninety percent of the lots within the areas devoted to mixed residential uses shall be within a 1/4 mile or a five-minute walk from common open space.

Stormwater management. The design and development of the traditional neighborhood development should minimize off-site stormwater runoff, promote on-site filtration, and minimize the discharge of pollutants to ground and surface water. Natural topography and existing land cover should be maintained/protected to the maximum extent practicable. New development and redevelopment shall meet the following requirements:

Lot and block standards.

Circulation standards. The circulation system shall allow for different modes of transportation. The circulation system shall provide functional and visual links within the residential areas, mixed use area, and open space of the traditional neighborhood development and shall be connected to existing and proposed external development. The circulation system shall provide adequate traffic capacity, provide connected pedestrian and bicycle routes, especially off street bicycle or multi-use paths or bicycle lanes on the streets, control through traffic, limit lot access to streets of lower traffic volumes, and promote safe and efficient mobility through the traditional neighborhood development.

Existing structures, if determined to be historic or architecturally significant, shall be protected from demolition or encroachment by incompatible structures or landscape development.

The U.S. Secretary of the Interior's Standards for Rehabilitation of Historic Properties shall be used as the guiding criteria for renovating historic or architecturally significant structures.

Height. New structures within a traditional neighborhood development shall be no more than three stories for single-family residential, or five stories for commercial, multifamily residential, or mixed use.

Entries and facades.

Streetlighting shall be provided along all streets. Generally more, smaller lights, as opposed to fewer, high-intensity lights, should be used. Streetlights shall be installed on both sides of the street at intervals of no greater than 75 feet. Streetlighting design shall meet the minimum standards developed by the Illumination Engineering Society.

Exterior lighting shall be directed downward in order to reduce glare onto adjacent properties.

Street trees. A minimum of one deciduous canopy tree per 40 feet of street frontage, or fraction thereof, shall be required. Trees can be clustered and do not need to be evenly spaced. Trees should preferably be located between the sidewalk and the curb, within the landscaped area of a boulevard, or in tree wells installed in pavement or concrete. If placement of street trees within the right-of-way will interfere with utility lines, trees may be planted within the front yard setback adjacent to the sidewalk.

Parking area landscaping and screening.

Installation and maintenance of landscaping materials.

Materials. All plant materials must meet the minimum standards set by the American National Standards Institute in ANSI Z60.1 American Standard for Nursery Stock. Landscape species shall be indigenous or proven adaptable to the climate, but shall not be invasive species.

A contiguous area of less than 40 acres with the Village of Saukville, as more particularly described in Subsection D below, has been identified as an appropriate location for a premier economic development district to be created pursuant to the provisions of § 125.51(4)(u), Wis. Stats.; and

The Village of Saukville has received a written report in the form of a Minimum Valuation Letter from an independent third-party appraiser or market research firm regarding proposed projects within the premier economic development district having an estimated comprehensive new construction assessed valuation increase of at least $20,000,000; and

The area described in Subsection D does not include any land which is zoned exclusively for industrial use or zoned exclusively for single-family or two-family residences; and

No other premier economic development district has been created within the Village of Saukville.