4-3.1

Permitted use schedule.

(A)

Tabulation of permitted uses. Within each zoning district indicated on the official zoning map and subject to all requirements and conditions specified in this Ordinance, land, buildings, and structures shall only be used and buildings and structures shall only be erected which are intended or designed to be used for uses listed in the permitted use schedule, Table 4-3-1. In the appropriate columns of Table 4-3-1 uses permitted by right in the various districts are indicated with a "P", uses requiring a special use permit are indicated by an "S", uses permitted by right subject to meeting additional development standards as set forth in article VI (Development standards) are indicated with a "D", and uses requiring a manufactured housing overlay zone are indicated with a "Z." The column on the far right labeled "LUC" indicates the land use classification of each use as it relates to planting yard requirements found in section 6-4 (Landscaping regulations).

(B)

Formulation of permitted use schedule.

1)

The Standard Industrial Classification Manual — 1987 was utilized in the preparation of this table and shall be referred to as a guide for purposes of interpretation by the enforcement officer. SIC codes are used to refer to SIC classifications. Entries with 0000 in the Reference SIC column do not correspond to any classification in the SIC manual.

2)

When a use is not listed in the permitted use schedule, the enforcement officer shall classify it with that use in the table most similar to it. The SIC manual shall serve as a guide in classifying any unlisted use. If the enforcement officer should determine that a use is not listed and is not similar to a use in the permitted use schedule, than said use is prohibited.

3)

Rental and leasing of any commodity shall be permitted under the same classification and in the same districts as are sales of that commodity, unless rental or leasing of that commodity is listed separately in the permitted use schedule.

4)

If an industrial plant or facility involves two (or more) manufacturing activities with different SIC codes on the same zone lot, the industrial plant shall be permitted only in those zoning districts where the more restricted activity is permitted. (For example, an industrial plant preparing canned peanuts and also manufacturing the cans is allowed in those zoning districts permitting can manufacturing.)

4-3.2

Mixed uses. Two or more permitted uses may occupy the same principal building.

4-3.3

Prohibited uses. Within certain overlay districts, some uses are prohibited, regardless of the uses permitted in the underlying zoning district(s). The following uses are prohibited in the overlay districts listed.

(A)

Scenic corridor overlay district [4-11.3(A)2)]. Class A, B, and C manufactured dwellings are prohibited in the scenic corridor overlay district.

(B)

Airport overlay district [4-11.4(B)]. Multi-family housing and single-family housing on lots less than 40,000 square feet are prohibited in the airport overlay district.

(C)

Watershed critical area [7-3.5(A)]. See section 7-3.5 (Spill risk reduction) for the list of uses prohibited in the watershed critical areas.

(D)

Flood hazard area [7-5.3(D)2)]. Storage or processing of materials that are flammable, corrosive, toxic or explosive, or which could otherwise be injurious to human, animal or plant life in time of flood shall be prohibited from the flood hazard areas.