Verona City Zoning Code
ARTICLE XIV
Performance Standards
§ 150-14.1 Air quality.
[Amended at time of adoption of Code (see Ch. 1, General Provisions, Art. I)]
This chapter hereby incorporates by reference and makes a part hereof as though fully set forth those standards as found in N.J.A.C. 7:27-1 et seq.
§ 150-14.2 Electromagnetic interference.
In any zoning district, no use, activity, or process shall be conducted which produces electromagnetic interference with normal radio or television reception in any zoning district.
§ 150-14.3 Fire protection.
[Amended at time of adoption of Code (see Ch. 1, General Provisions, Art. I)]
This chapter hereby incorporates by reference and makes a part hereof as though fully set forth those standards as found in N.J.A.C. 5:10-19.1 (Hotels) and 5:10-19.2 (Multiple Dwellings), N.J.A.C. 5:23-3.17 (Fire Protection Subcode), N.J.A.C. 5:23-4.1 et seq. (Enforcing Agencies, Duties; Powers; Procedures), including all the amendments to the above.
§ 150-14.4 Humidity, heat and glare.
In any zoning district, any activity producing humidity in the form of steam or moist air or producing heat or glare shall be carried on in such a manner that the steam, humidity, heat or glare is not perceptible at any lot line.
§ 150-14.5 Noise control, method of measurement.
A.
Methods of measurement. For the purpose of measuring the intensity and frequencies of sound, sound-level meters and octave-band filters shall be employed. In the enforcement of this regulation, sounds produced by the operation of motor vehicles or other transportation facilities shall not be included in determining the maximum permitted decibel levels.
B.
The maximum permitted sound-pressure level (in decibels) shall be 0.0002 microbars.
Octave Band (cycles per second) | Sound-Pressure Level (decibels) |
|---|---|
0 to 74 | 65 |
75 to 149 | 50 |
150 to 299 | 44 |
300 to 599 | 38 |
600 to 1,199 | 35 |
1,200 to 2,399 | 32 |
2,400 to 4,799 | 29 |
4,800 and over | 26 |
§ 150-14.6 Radiation.
This chapter hereby incorporates by reference and makes a part hereof as though fully set forth those standards as found in N.J.S.A. 26:2D-1 et seq., including all the amendments to the above.
§ 150-14.7 Vibration.
A.
Method of measurement. For the purpose of measuring vibration, a three-component measuring system shall be employed.
B.
Maximum permitted steady state and impact vibration displacement (in inches).
Impact | Frequency (cycles per second) | Vibration Displacement (in inches) Steady State |
|---|---|---|
Under 10 | 0.0005 | 0.0010 |
10 to 19 | 0.0004 | 0.0008 |
20 to 29 | 0.0003 | 0.0006 |
30 to 39 | 0.0002 | 0.0004 |
40 and over | 0.0001 | 0.0002 |