Within the R-2 Two-Family Residential District, no structure or land shall be used, except for one or more of the following uses:

   (A)   Any permitted use regulated in the R-1A District, § 153.050; and/or

   (B)   Two-family dwelling.

(Ord. 99-03, passed - -; Ord. passed 10-11-1963; Ord. 16-12, passed 11-14-2016)

   Within any R-2 Two-Family Residential District, no structure or land shall be used for the following uses except by conditional use permit: Any conditional use regulated in the R-1A District, § 153.051.

(Ord. passed 10-11-1963; Ord. 16-12, passed 11-14-2016)

   Within the R-2 Two-Family Residential District, the following uses shall be permitted accessory uses: any permitted accessory use regulated in the R-1A District, § 153.052.

(Ord. passed 10-11-1963; Ord. 16-12, passed 11-14-2016)

   (A)   No structure or building shall exceed 30 feet in height as defined in § 153.004 “Building Height,” except as provided in § 153.009 of this chapter.

   (B)   The following minimum requirements shall be observed subject to the additional requirements, exceptions and modifications as set forth elsewhere in this chapter:

      (1)   Lot area: 15,000 square feet;

      (2)   Lot width:

         (a)   Yard, building setback: 100 feet;

         (b)   Front: 30 feet;

         (c)   Side: ten feet adjacent to another lot, 20 feet adjacent to street; and

         (d)   Rear: 30 feet or 20% of average lot depth, whichever is greater.

      (3)   Lot area per dwelling unit: 7,500 square feet.

   (C)   Exterior walls of all principal structures must be covered only with siding (e.g., wood, vinyl, aluminum or metal horizontal lap), stucco, brick, glass or other comparable material as approved by the Zoning Administrator. Prohibited materials include, but are not limited to, cloth, fabric, canvas, plastic sheets, tarps, tarpaper, insulation, sheet metal and corrugated metal.

(Ord. 09-19, passed - -; Ord. passed 10-11-1963; Ord. 16-12, passed 11-14-2016)