The purpose of the R-2 District is to provide for the orderly development of medium to low density single family homes and customary supporting residential facilities, such as schools, churches and public parklands.

(Ord. 81-48. Passed 7-7-81.)

   Permitted and conditional uses for the R-2 Single Family District are the same as those for the R-1 Single Family District.

(Ord. 92-45. Passed 6-16-92.)

   (a)   Lot Requirements for Each Dwelling in the R-2 Single Family District are:

      (1)   Minimum lot area: 8,000 square feet.

      (2)   Minimum lot width: Seventy feet; Ninety feet for corner lots, located on publicly dedicated rights-of-way.

      (3)   Minimum lot depth: One Hundred thirty-five feet for lots backing onto an arterial street.

      (4)   Minimum front yard: Thirty feet; forty feet for structures on lots fronting on arterial streets. Porches, meeting the requirements of Section 1175.03(d), may encroach up to eight feet into the minimum front yard but in no case may they be closer than ten feet from the front lot line.

      (5)   Minimum side yard: Eight feet.

      (6)   Minimum rear yard: Thirty feet; fifty feet for lots backing onto an arterial street, thirty feet for decks and patios thirty inches in height or less above the adjacent grade prior to construction for lots backing onto an arterial street; fifteen feet for accessory buildings, decks/patios thirty inches in height or less above the adjacent grade prior to construction.

      (7)   Maximum lot coverage: Thirty-five percent (35%).

   (b)   Building Requirements for Each Dwelling in the R-2 Single Family District are: Maximum height: Thirty-five feet.

   (c)   Site Development Requirements in the R-2 Single Family District are:

      (1)   Parking: At least two parking spaces, one of which must be enclosed.

      (2)   All applicable subdivision regulations and sign, parking and landscaping regulations of this Zoning Ordinance must be satisfied.

(Ord. 06-09. Passed 5-2-06.)