Wittenberg Village City Zoning Code
§ 17.15
G-M-I GENERAL MANUFACTURING AND INDUSTRIAL DISTRICT.
The G-M-I District is intended to provide for manufacturing or industrial operation which, on the basis of actual physical and operational characteristics, would not be detrimental to the surrounding area or to the Village as a whole by reason of noise, dirt, dust, smoke, odor, traffic, physical appearance or other similar factors, and subject to such regulatory controls as will reasonably insure compatibility in this respect. Outdoor storage of raw materials or finished products is not allowed.
(1)
PERMITTED USES. None, except within the Wittenberg Business Park those uses conforming to the Deed Restrictions and Protective Covenants of the Wittenberg Business Park, shall be considered permitted uses.
(2)
CONDITIONAL USES.
(a)
Manufacturing establishments, usually described as factories, mills or plants, in which raw materials are transformed into finished products, and establishments engaged in assembling component parts of manufactured products.
(b)
Other industrial or commercial activities which possess the special problem characteristics described above relating to the creation of hazards or nuisance conditions.
(c)
The outdoor storage of industrial products, machinery, equipment or other materials, provided that such storage be enclosed by a suitable fence or other manner of screening.
(d)
Railroads, including rights of way, railroad yards, and structures normally incident to the operation of railroads, including station houses, platforms, and signal towers, but not including warehouses owned by companies other than railroad companies or road terminal companies.
(e)
Wholesale establishments and warehouses.
(f)
Building construction contractors.
(g)
Highway passenger and motor freight transportation.
(h)
Light industry and service uses, as follows:
1.
Automotive body repair
2.
Automotive Upholstery
3.
Cleaning, pressing, dyeing
4.
Commercial bakeries
5.
Commercial greenhouses
6.
Distributors
7.
Food locker plants
8.
Printing and publishing
(3)
LOT, YARD AND BUILDING REQUIREMENTS.
Lot frontage | Minimum 100 ft. |
Lot area | Minimum 15,000 ft. |
Front yard | Minimum 25 ft. |
Parking lot setback | Minimum 15 ft. |
Side yards: | |
Principal building | Minimum 20 ft. |
Accessory building | Minimum 5 ft. |
Rear yard | Minimum 25 ft. |
Building height | Maximum 35 ft. |
Side and rear lots abutting a residential district shall be landscaped for the entire area.
(4)
OFF-STREET PARKING AND LOADING REQUIREMENTS. See sec. 17.23 of this chapter.
(5)
PERFORMANCE STANDARDS. See sec. 17.24 of this chapter.
(6)
SIGNS. See sec. 17.25 of this chapter.