Zoneomics Logo
search icon

Anaheim City Zoning Code

CHAPTER 18

122 BEACH BOULEVARD SPECIFIC PLAN NO. 2017-1 SP 2017-1 ZONING AND DEVELOPMENT STANDARDS

18.122.010 PURPOSE.

   .010   Purpose. The provisions contained herein shall govern zoning and development within the Beach Boulevard Specific Plan Area. Where the provisions contained herein do not discuss a specific condition or situation which arises, the provisions of the Anaheim Municipal Code, as it may be amended from time to time, shall apply to the Beach Boulevard Specific Plan. In the event of a conflict between the provisions of this chapter and the other provisions of the Anaheim Municipal Code, the provisions set forth in this chapter shall govern. All uses within the Beach Boulevard Specific Plan boundaries shall comply with all applicable local, state and federal laws, ordinances and regulations.
   .020   Intent. The regulations set forth in this chapter have been established to provide for orderly development of that certain property (hereinafter referred to as the "Specific Plan Area") described in the Beach Boulevard Specific Plan No. 2017-1 (hereinafter referred to as the "Specific Plan"). These regulations provide for the arrangement, development and use of various "development areas" within the Specific Plan Area to promote its revitalization by encouraging market-driven land use changes and the infill development of currently vacant or underutilized properties. Application of these regulations is specifically intended to provide for and to ensure the most appropriate use of the Specific Plan Area, to create a harmonious relationship among land uses, and to protect the health, safety and welfare of the community.
   .030   Organization. In accordance with the provisions of Chapter 18.72 (Specific Plans), the standards herein are patterned after the zone districts and definitions of Title 18 (Zoning Code). The Specific Plan is consistent with the intent, purpose and goals of the Anaheim General Plan and Title 18 (Zoning Code). (Ord. 6453 § 1 (part); December 18, 2018.)

18.122.020 DEVELOPMENT REVIEW AND PERMITS.

   .010   Prior to commencing any work pertaining to the erection, construction, reconstruction, moving, conversion, alteration or addition to any building or structure within the Specific Plan Area, all building plans shall be subject to review and approval of the City in compliance with all provisions of Chapter 18.60 (Procedures).
   .020   Specific Plan Amendments. Specific Plan Amendments, including modification of development area boundaries or creation of new development areas, shall be processed in accordance with the provisions of Chapters 18.76 (Zoning Amendments) and 18.72 (Specific Plans).
   .030   Specific Plan Adjustments. Modification to zoning and development standards in one or more development areas (including provisions pertaining to land uses) shall be processed in accordance with Chapter 18.72 (Specific Plans).
   .040   Area Boundaries. The Specific Plan is divided into nine (9) development areas: Residential Low-Medium, Residential Medium, Mixed-Use Medium, Mixed-Use High, Neighborhood Commercial, Regional Commercial, Office, Public-Recreational and Semi-Public. The Specific Plan Area is identified on Figure 1-2, Beach Boulevard Planning Area, and the development areas are shown on Figure 4-1, Developmental Areas in the Specific Plan document. A legal description of the Specific Plan Area is provided in Ordinance No. 6454, approved by City Council on December 18, 2018.
   .050   Interpretation. If ambiguity arises concerning the meaning or appropriate application of the provisions of the Specific Plan, the Planning and Building Director has the authority to make an interpretation. In so doing, the Director shall consider the following factors and document applicable findings accordingly:
      .0501   The case is similar to previous interpretations of similar provisions;
      .0502   The interpretation responds satisfactorily to the vision, intent and purpose of the Specific Plan;
      .0503   The resulting project is consistent with the General Plan; and
      .0504   The decision constitutes sound precedent for other similar situations.
   .060   Nonconformities. Chapter 18.56 (Nonconformities) shall apply to any nonconforming lots, buildings and uses within the Beach Boulevard Specific Plan, with the following exception:
      .0601   Nonconforming signs shall not be allowed to continue when there is a change in use of the property.
      .0602   The adaptive reuse of motels, including nonconforming motels, is prohibited and their use shall not be allowed to continue when there is a change in use of the property.
   .070   Administrative Review. Development applications for projects that comply with the vision of the Beach Boulevard Specific Plan and the Zoning and Development Standards of this chapter are eligible for administrative review. Such projects shall be required to process a Final Plan application, pursuant to Chapter 18.70 (Final Plan Reviews).
      .0701   The Planning and Building Director shall have approval authority over the Final Plan, and the decision may be appealed to the Planning Commission. The Director shall also have the discretion to refer the application to Planning Commission.
      .0702   For uses requiring discretionary review, such as an administrative adjustment, conditional use permit or variance, the Final Site Plan shall be submitted and reviewed for consistency with the Specific Plan in conjunction with the processing of the administrative adjustment, conditional use permit or variance.
   .080   Administrative Adjustments. The Planning and Building Director, or his/her designee, may grant an administrative adjustment, according to the procedures contained in Section 18.62.040 (Administrative Adjustments) of Chapter 18.62 (Administrative Review). In addition to the required findings of Section 18.62.040, Administrative Adjustments shall be subject to the finding that the Administrative Adjustment does not change the vision or policy intent of the Specific Plan.
   .090   Discretionary Review. Requests for discretionary review include applications for administrative adjustments as well as other applications subject to Planning Commission and/or City Council authority. Requests for a conditional use permit shall be processed in accordance with Chapter 18.66 (Conditional Use Permits). Requests for a variance shall be processed in accordance with Chapter 18.74 (Variances). Requests for a density bonus shall be processed in accordance with Chapter 18.52 (Affordable Housing).
   .100   Severability. If a court determines that a provision of this chapter is unconstitutional or invalid, that determination shall not affect the validity of other parts of this chapter. (Ord. 6453 § 1 (part); December 18, 2018.)

18.122.030 INTENT OF INDIVIDUAL DEVELOPMENT AREAS.

   .010   Residential Low-Medium (R-LM). The intent of the Residential Low-Medium Development Area is to provide attractive, healthy, and safe environments for attached single-family and multiple family units as either condominiums or apartments. The R-LM allows for a range of housing types, including attached single-family townhouses, duplex or triplex buildings, courtyard housing, and mobile home parks. Residential development is permitted at a density of up to 18 dwelling units per acre. The underlying Anaheim Municipal Code base zone is the "RM-3" Multiple Family Residential Zone. If the standards in this Specific Plan are silent on a particular topic, the RM-3 Zone shall apply.
   .020   Residential Medium (R-M). The intent of the Residential Medium Development Area is to provide for quality, well-designed multifamily living environments, as either condominiums or apartments, near transit and other services. The R-M allows for a variety of housing types, including townhomes, courtyard housing, and stacked flats. Residential development is permitted at a density of up to 36 dwelling units per acre. The underlying Anaheim Municipal Code base zone is the "RM-4" Multiple Family Residential Zone. If the standards in this Specific Plan are silent on a particular topic, the RM-4 Zone shall apply.
   .030   Mixed-Use Medium (MU-M). The intent of the Mixed-Use Medium Development Area is to allow flexibility for parcels that could transition from strip commercial uses to residential or a mix of residential, commercial, and/or office development. The MU-M allows residential in either a stand-alone or mixed-use configuration at a density of up to 36 dwelling units per acre. Residential development in these areas emphasizes quality and offers a variety of amenities. A mix of commercial uses would continue to allow for a range of community-serving retail, office, and service commercial uses. The MU-M permits the non-residential component of mixed-use development at a maximum floor area ratio of 0.35. The MU-M also allows for stand-alone commercial uses. The underlying Anaheim Municipal Code base zone is the "MU" Mixed Use Overlay Zone. If the standards in this Specific Plan are silent on a particular topic, the MU Overlay Zone shall apply.
   .040   Mixed-Use High (MU-H). The intent of the Mixed-Use High Development Area is to allow a mix of uses, including residential, commercial, services, hospitality, and professional office uses, in a high-quality environment. The focus for new development in the MU-H is on creating a pedestrian-friendly environment, including increased connectivity and community gathering spaces. Uses and activities should be designed together to create a dynamic urban environment. The preferred pattern of development is vertically mixed-use buildings with continuous commercial street frontage on the first and, perhaps, second floors, supported by residential and/or office uses above. Development may also mix uses in a horizontal or multi-use pattern. Stand-alone uses within a multi-use project should be integrated with an overall project design and connected to other adjoining uses by plazas, promenades, and landscaped corridors. They should also include common architectural themes and signage. Typical residential uses could include stacked flats, live-work units, townhouses, and lofts. Residential development in these areas emphasizes quality and offer a variety of amenities. The residential component of mixed-use development is permitted at a density of up to 60 dwelling units per acre. The non-residential component of mixed-use development is permitted at a maximum floor area ratio of 0.35. Stand-alone residential and non-residential projects are permitted on parcels smaller than 2.5 acres and at a maximum of 60 dwelling units per acre or a floor ratio of 0.35, respectively. The underlying Anaheim Municipal Code base zone is the "MU" Mixed Use Overlay Zone. If the standards in this Specific Plan are silent on a particular topic, the MU Overlay Zone shall apply.
   .050   Neighborhood Commercial (N-C). The intent of the Neighborhood Commercial Development Area is to provide for the daily shopping, dining, and service commercial needs of the surrounding neighborhoods. Allowed uses include retail and services such as grocery stores, specialty shops, small retail stores, hair salons, dry cleaners, restaurants, and coffee houses. Projects should be designed to encourage pedestrian use by providing good connectivity within and to the site, with buildings clustered and close to the street. Additionally, projects should be compatible in scale and design with adjacent residential areas. Development is permitted at a maximum floor area ratio of 0.35. The underlying Anaheim Municipal Code base zone for is the "C-NC" Neighborhood Center Commercial Zone. If the standards in this Specific Plan are silent on a particular topic, the C-NC Zone shall apply.
   .060   Regional Commercial (R-C). The intent of the Regional Commercial Development Area is to serve a larger market area than Neighborhood Commercial areas. Given the regional nature of the Beach Boulevard corridor and the tourism market to the north in Buena Park, this development area allows for large-scale commercial uses, specialty stores and restaurants, theaters, home goods stores, entertainment, commercial recreation, and hospitality uses that serve a broad area. Projects should be designed to encourage pedestrian use by providing good connectivity within and to the site, with buildings clustered and close to the street. Development is permitted at a maximum floor area ratio of 0.35. The underlying Anaheim Municipal Code base zone is the "C-R" Regional Commercial Zone. If the standards in this Specific Plan are silent on a particular topic, the C-R Zone shall apply.
   .070   Office (O). The intent of the Office Development Area is to allow a variety of small-scale office uses, including legal services, insurance services, real estate services, and medical or dental offices, and other support services. Development is permitted at a maximum floor area ratio of 0.50. The underlying Anaheim Municipal Code base zone is the "O-L" Office Low Zone. If the standards in this Specific Plan are silent on a particular topic, the O-L Zone shall apply.
   .080   Semi-Public (S-P). The intent of the Semi-Public Development Area is to accommodate hospitals, nursing homes, assisted living facilities, and other medical-related uses in a clustered activity center to support West Anaheim and the surrounding area. The underlying Anaheim Municipal Code base zone is the "SP" Semi-Public Zone. If the standards in this Specific Plan are silent on a particular topic, the SP Zone shall apply.
   .090   Public Recreational (P-R). The intent of the Public Recreational Development Area is to provide active and passive public park and open space, areas including Twila Reid and Schweitzer Parks, as well as public facilities such as the West Anaheim Youth Center. They also include ancillary public buildings and facilities, such as a fire station and small recreation buildings. The underlying Anaheim Municipal Code base zone is the "PR" Public Recreational Zone. If the standards in this Specific Plan are silent on a particular topic, the PR Zone shall apply. (Ord. 6453 § 1 (part); December 18, 2018.)

18.122.040 DEFINITIONS.

   .010   "B" Words, Terms And Phrases.
      "Bail Bonds Facility." An establishment that provides bail bonds, documents that ensure to the court system that a person facing charges, and who typically is in jail, will appear for future court appointments if released.
   .020   "C" Words, Terms And Phrases.
      "Check Cashing Facility." An establishment that for compensation engages, in whole or in part, in the business of cashing checks, payday advances, warrants, drafts, money orders or other commercial paper serving the same purpose. "Check cashing facility" does not include a State or Federally chartered bank, savings association, credit union or industrial loan company. "Check cashing facility" does not include a retail seller engaged primarily in the business of selling consumer goods, including consumables, to retail buyers that cash checks or issue money order for minimum flat fee as a service that is incidental to its main purpose or business.
   .030   "P" Words, Terms And Phrases.
      "Pawn Shop." An establishment wherein the business of a pawnbroker is conducted. A pawnbroker is any person who lends or advances money or other things for profit on the pledge and possession of personal property, or other valuable things, other than securities or written or printed evidences of indebtedness; or, who deals in the purchasing of personal property or other valuable things on condition of selling the same back to the seller at a stipulated price.
   .040   "V" Words, Terms And Phrases.
      "Vape Sales." The sale of vape products including, but not limited to, electronic vapor devices, defined as any devices with a heating element, a battery, or an electronic circuit that provides nicotine or other vaporized liquids to the user in a manner that simulates smoking tobacco products, shisha, herbs, or any other product that produces smoke (commonly known as "electronic cigarettes"), and electronic vapor inhalation substance products, defined as cartridges, cartomizers, e-liquid, smoke juice, tanks, tips, atomizers, vaporizers, electronic smoking device batteries, electronic smoking device chargers, and any other item specifically designed for the preparation, charging, or use of electronic vapor devices. (Ord. 6453 § 1 (part); December 18, 2018.)

18.122.050 USES.

   .010   Primary Uses. Table 122-A (Primary Uses by Development Area: Residential Use Classes) and Table 122-B (Primary Uses by Development Area: Non-Residential Use Classes) identify allowable primary uses, listed by classes of uses as defined in Chapter 18.36 (Types of Uses).
   .020   Accessory Uses. Table 122-C (Accessory Use Classes by Development Area) identifies allowable accessory uses and structures, listed by classes of uses as defined in Section 18.36.050 of Chapter 18.36 (Types of Uses).
   .030   Temporary Uses. Table 122-D (Temporary Use Classes by Development Area) identifies allowable temporary uses and structures, listed by classes of uses as defined in Section 18.36.060 of Chapter 18.36 (Types of Uses).
   .040   Use Tables. The allowable uses in Tables 122-A, 122-B, 122-C and 122-D for each development area are established by letter designations as follows:
      .0401   "P" designates classes of uses permitted by right;
      .0402   "C" designates classes of uses permitted with a conditional use permit;
      .0403   "N" designates classes of uses that are prohibited; and
      .0404   "T" designates classes of uses permitted with a telecommunications antenna review permit.
   .050   Interpreting Classes of Uses. The provisions for interpreting the classes of uses in Tables 122-A, 122-B, 122-C or 122-D are set forth in Section 18.36.020 (Classification of Uses) of Chapter 18.36 (Types of Uses).
   .060   Unlisted Uses. Any class of use that is not listed in Tables 122-A, 122-B, 122-C or 122-D is not permitted.
   .070   General Requirements for Permitted Uses. Notwithstanding any other provisions of this chapter, the following general requirements shall apply for the conduct of any use permitted in any development area:
      .0701   All uses shall be maintained in such a manner that they are neither obnoxious, offensive or objectionable by reason of emission of odor, dust, smoke, gas, noise, vibration, electromagnetic disturbance, radiation, fumes, excessive lighting (glare) or other similar causes detrimental to the public health, safety or general welfare.
      .0702   All uses shall be conducted wholly within a building except the following:
         (1)   Normal service station operations;
         (2)   Those uses whose description in Chapter 18.36 (Types of Uses) allow for outdoor activities; and,
         (3)   Those uses specifically allowed by this chapter to have outdoor activities.
   .080   Special Provisions. Special provisions related to a use are referenced in the "Special Provisions" column of Tables 122-A, 122-B and 122-C. Such provisions may include references to other applicable code sections or limitations to the specified land use.
   .090   Overlay Zones. Any property that is located within an overlay zone may be subject to additional requirements as specified in the overlay zone.
Table 122-A
PRIMARY USES BY DEVELOPMENT AREA: RESIDENTIAL USE CLASSES
P=Permitted by Right
C=Conditional Use Permit (CUP) Required
M=Minor Conditional Use Permit (MCUP) Required
N=Prohibited
T=Telecommunications Antenna Review Permit Required
R-LM
R-M
MU-M
MU-H
N-C
R-C
O
S-P
P-R
Special Provisions
Table 122-A
PRIMARY USES BY DEVELOPMENT AREA: RESIDENTIAL USE CLASSES
P=Permitted by Right
C=Conditional Use Permit (CUP) Required
M=Minor Conditional Use Permit (MCUP) Required
N=Prohibited
T=Telecommunications Antenna Review Permit Required
R-LM
R-M
MU-M
MU-H
N-C
R-C
O
S-P
P-R
Special Provisions
Alcoholism or Drug Abuse Recovery or Treatment Facilities (Small)
P
P
P
P
N
N
N
N
N
 
Community Care Facilities–Licensed (Small)
P
P
P
P
N
N
N
N
N
 
Community Care Facilities– Unlicensed (Small)
P
P
P
P
N
N
N
N
N
Subject to §§ 18.16.058 and 18.38.123
Dwellings-Multiple Family
P
P
P/C
P/C
N
N
N
N
N
In the MU-M and MU-H, a stand alone residential use on sites larger than 2.5 acres require approval of a CUP.Subject to 18.40.090 
Dwellings- Single-Family Attached
P
P
P/C
P/C
N
N
N
N
N
In the MU-M and MU-H, a stand alone residential use on sites larger than 2.5 acres require approval of a CUP.Subject to 18.40.090 
Dwellings- Single-Family Detached
C
N
N
N
N
N
N
N
N
Subject to 18.40.090 
Dwellings–Two-Unit Development
N
N
N
N
N
N
N
N
N
 
Employee Housing (Small)
P
P
P/C
P/C
N
N
N
N
N
Subject to 18.40.090
Mobile Home Parks
C
N
N
N
N
N
N
N
N
 
Senior Citizen Housing
C
C
P
P
N
N
N
N
N
Senior Citizens' Apartment projects subject to Chapter 18.50 and 18.40.090
Senior Living Facilities (Small)
P
P
P
P
N
N
N
N
N
 
Sober Living Homes (Small)
P
P
P
P
N
N
N
N
N
Subject to 18.16.058 and 18.38.123
Supportive Housing
P
P
P/C
P/C
N
N
N
N
N
In the MU-M and MU-H, a stand alone residential use on sites larger than 2.5 acres require approval of a CUP
Transitional Housing
P
P
P/C
P/C
N
N
N
N
N
In the MU-M and MU-H, a stand alone residential use on sites larger than 2.5 acres require approval of a CUP
 
Table 122-B
PRIMARY USES BY DEVELOPMENT AREA:
NON-RESIDENTIAL USE CLASSES
P=Permitted by Right
C=Conditional Use Permit (CUP) Required
M=Minor Conditional Use Permit (MCUP) Required
N=Prohibited
T=Telecommunications Antenna Review Permit Required
R-L M
R-M
MU-M
MU-H
N-C
R-C
O
S-P
P-R
Special Provisions
Table 122-B
PRIMARY USES BY DEVELOPMENT AREA:
NON-RESIDENTIAL USE CLASSES
P=Permitted by Right
C=Conditional Use Permit (CUP) Required
M=Minor Conditional Use Permit (MCUP) Required
N=Prohibited
T=Telecommunications Antenna Review Permit Required
R-L M
R-M
MU-M
MU-H
N-C
R-C
O
S-P
P-R
Special Provisions
Agricultural Crops
N
N
N
N
N
N
N
N
N
 
Alcoholic Beverage Manufacturing
N
N
P/C
P/C
P/C
P/C
N
N
N
Subject to 18.38.025; Permitted without a CUP if building is less than 6,000 square feet and in the MU-M, MU-H, N-C or R-C
Alcoholic Beverage Sales-Off-Sale
N
N
P/C
P/C
P/C
P/C
N
N
N
Subject to 18.60.220; Permitted without a CUP if use is in conjunction with Markets–Large and in the MU-M, MU-H, N-C or R-C
Alcoholic Beverage Sales-On-Sale
N
N
P/C
P/C
P/C
P/C
N
N
N
Permitted without a CUP when in conjunction with Restaurants- Full-Service, Restaurants- General and Restaurants- Outdoor Dining and in the MU-M, MU-H, N-C or R-C
Alcoholism or Drug Abuse Recovery or Treatment Facilities (Large)
C
C
C
C
C
C
N
C
N
 
Ambulance Services
N
N
C
C
C
C
N
C
N
 
Animal- Boarding
N
N
P/C
P/C
P/C
P/C
N
N
N
Permitted without a CUP when conducted entirely indoors subject to 18.38.270 and in the N-C or R-C
Animal- Grooming
N
N
P/C
P/C
P/C
P/C
N
N
N
Permitted without a CUP when conducted entirely indoors, subject to 18.38.270 and in the MU-M, MU-H, N-C or R-C
Antennas– Broadcasting
C
C
P/C
P/C
P/C
P/C
P/C
C
C
Permitted without a CUP if designed similar to stealth telecommunicati ons facility as defined in 18.38.060.030.0 312 and in the MU-M, MU-H, N-C, R-C or O
Antennas–Privat e Transmitting
P
C
C
C
N
N
N
N
N
Subject to 18.38.040
Antennas– Telecommunica tions Ground-Mounted (Non-Stealth)
N
N
N
N
N
N
N
N
N
 
Antennas– Telecommunica tions-Stealth Building-Mounted
T
T
T
T
T
T
T
T
T
Subject to 18.38.060 and 18.62.020
Antennas– Telecommunica tions- Stealth Ground-Mounted
N
C
T
T
T
T
T
T
T
Subject to 18.38.060
Automatic Teller Machines (ATM's)
N
N
P/M
P/M
P/M
P/M
P/M
P/M
P/M
Permitted without a minor conditional use permit if located inside an existing business or on an exterior building wall
Subject to 18.36.040
Automotive- Impound Yards
N
N
N
N
N
N
N
N
N
 
Automotive-Part s Sales
N
N
N
N
N
N
N
N
N
 
Automotive- Public Parking
N
N
M
M
C
C
C
C
C
 
Automotive- Repair & Modification: Major
N
N
N
N
C
C
N
N
N
Allowed with a CUP only if use is in conjunction with Markets-Large and in the N-C or R-C
Automotive- Repair & Modification: Minor
N
N
N
N
M
M
N
N
N
Allowed with a MCUP only if use is in conjunction with Markets-Large and in the N-C or R-C
Automotive- Sales Agency Office (Retail)
N
N
M
M
N
N
N
N
N
Subject to Section 18.38.065
Automotive-Sales Agency Office (Wholesale)
P/M/C
P/M/C
P/M/C
P/M/C
P/M/ C
P/M/ C
P/M/ C
P/M/ C
P/M/ C
Subject to 18.16.055 and 18.38.065. Minor conditional use permit required for on-site storage, display or parking of one or two vehicles being held as inventory. Conditional use permit required for on-site storage, display or parking of three or more vehicles being held as inventory
Automotive- Service Stations
N
N
N
N
N
N
N
N
N
 
Automotive- Vehicle Sales, Lease & Rental
N
N
C
C
N
N
N
N
N
 
Automotive–Vehicle Storage
N
N
M/C
M/C
N
N
N
N
N
Permitted for up to one year by minor conditional use permit, with optional one year extensions to permit the use for up to five years; conditional use permit required to permit the use for over five years.
Automotive- Washing
N
N
C
C
N
N
N
N
N
 
Bail Bonds
N
N
N
N
N
N
N
N
N
 
Banquet Halls
N
N
C
C
C
C
C
C
C
 
Bars and Night Clubs
N
N
C
C
C
C
N
N
N
 
Bed & Breakfast Inns
N
N
C
C
N
N
N
N
N
Subject to 18.38.080
Beekeeping
N
N
N
N
N
N
N
N
N
 
Billboards
N
N
N
N
N
N
N
N
N
 
Boarding House
N
N
C
C
N
N
N
N
N
 
Building Material Sales
N
N
N
N
N
N
N
N
N
 
Business and Financial Services
N
N
P
P
P
P
P
N
N
Check cashing and bail bond establishments are prohibited
Cemeteries
N
N
N
N
N
N
N
N
N
 
Commercial Equestrian Establishments
N
N
N
N
N
N
N
N
N
 
Commercial Retail Centers–Large
N
N
P/C
P/C
P/C
P/C
N
N
N
Permitted without a CUP if developed in compliance with 18.38.115 and in the MU-M, MU-H, N-C or R-C
Commercial Retail Centers–Small
N
N
P/C
P/C
P/C
P/C
N
N
N
Permitted without a CUP if developed in compliance with 18.38.115 and in the MU-M, MU-H, N-C or R-C
Community Care Facilities–Licensed (Large)
C
C
C
C
C
C
N
C
N
 
Community Care Facilities–Unlicensed (Large)
C
C
C
C
C
C
N
C
N
Subject to § 18.38.123
Community & Religious Assembly
N
N
C
C
C
C
C
C
C
 
Computer Internet & Amusement Facilities
N
N
N
N
N
N
N
N
N
 
Convalescent & Rest Homes
N
C
C
C
C
C
C
C
C
 
Convenience Store
N
N
C
C
C
C
N
N
N
Subject to § 18.38.110; Only allowed in conjunction with Automotive-Servi ce Stations or if integrated with a mixed-use development; Hours of operation are limited to between the hours of 5:00 a.m. and 12:00 a.m.
Dance and Fitness Studios- Large
N
N
P
P
P
P
P
C
C
 
Dance and Fitness Studios- Small
N
N
P
P
P
P
P
P
P
 
Day Care Centers
C
C
C
C
C
C
C
C
C
 
Drive-Through Facilities
N
N
N
N
P/C
P/C
P/C
N
N
Hours of operation are limited to between the hours of 5:00 a.m. and 12:00 a.m.; Hours of operation may be modified with approval of a CUP in the MU-H and R-C; Permitted without a CUP as an accessory use if in conjunction with Business and Financial Services as the primary use and in the N-C, R-C or O
Educational Institutions- Business
N
N
P/M
P/M
P/M
P/M
P/M
P/M
P/M
Permitted without a MCUP if the institution has ten students or less and in the MU-M, MU-H, N-C, R-C, O, S-P, or P-R
Educational Institutions- General
C
C
C
C
C
C
C
C
C
 
Educational Institutions- Tutoring
N
N
P
P
P
P
P
P
P
 
Emergency Shelters (50 or fewer occupants)
N
N
N
N
N
N
N
N
N
 
Emergency Shelters (more than 50 occupants)
N
N
N
N
N
N
N
N
N
 
Emergency Shelters
N
N
N
N
N
N
N
N
N
 
Entertainment Venue
N
N
C
C
C
C
N
N
C
 
Equipment Rental-Large
N
N
N
N
N
N
N
N
N
 
Equipment Rental-Small
N
N
N
N
N
N
N
N
N
 
Farmers Market
N
N
M
M
N
N
N
N
N
 
Golf Courses & Country Clubs
N
N
N
N
N
N
N
N
N
 
Helipads & Heliports
N
N
N
N
N
N
N
C
N
 
Hospital
N
N
C
C
N
N
N
C
N
 
Hotels
N
N
N
N/C
N
N/C
N
N
N
Hotels are permitted by CUP in the MU-H and R-C.
Hotel, Full Kitchen Facilities
N
N
N
C
N
N
N
N
N
 
Industry
N
N
N
N
N
N
N
N
N
 
Industry-Heavy
N
N
N
N
N
N
N
N
N
 
Junkyards
N
N
N
N
N
N
N
N
N
 
Markets-Large
N
N
P/C
P/C
P/C
P/C
N
N
N
Subject to 18.60.220; Permitted without a CUP if developed in compliance with 18.38.115 and in the MU-M, MU-H, N-C or R-C
Markets-Small
N
N
P/C
P/C
P/C
P/C
N
N
N
Permitted without a CUP if developed in compliance with 18.38.115 and in the MU-M, MU-H, N-C or R-C
Medical & Dental Offices
N
N
P
P
P
P
P
P
P
 
Medical Marijuana Dispensaries
N
N
N
N
N
N
N
N
N
 
Mortuaries
N
N
C
C
P
P
N
N
N
 
Motels
N
N
N
N
N
N
N
N
N
Motels, including adaptive reuse of motels, are prohibited.
Office- Development
N
N
P
P
P
P
P
N
N
 
Office-General
N
N
P
P
P
P
P
P
P
 
Oil Production
N
N
N
N
N
N
N
N
N
 
Outdoor Storage Yards
N
N
N
N
N
N
N
N
N
 
Personal Services- General
N
N
P/C
P/C
P/C
P/C
N
P/C
N
In the MU-M, MU-H, N-C, R-C and S-P the following Personal Services – General uses have the following additional requirements:
•    Laundromats are subject to 18.38.150, otherwise a CUP is required;
•   Tattoo and massage establishments require a CUP
Personal Services- Restricted
N
N
N
N
C
C
N
N
N
 
Plant Nurseries
N
N
C
C
N
N
N
N
N
 
Public Services
N
N
P
P
P
P
P
P
P
 
Public Art and Murals
P
P
P
P
P
P
P
P
P
Subject to Section 18.62.130 when visible to public property or public rights-of-way
Recreation– Billiards
N
N
C
C
C
C
N
N
N
 
Recreation– Commercial Indoor
N
N
C
C
C
C
N
C
P
 
Recreation– Commercial Outdoor
N
N
C
C
C
C
N
C
P
 
Recreation– Low-Impact
P
P
P
P
P
P
P
P
P
 
Recreation– Swimming & Tennis
N
N
C
C
C
C
N
C
P
 
Recuperative Care/Medical Respite
N
N
N
N
N
N
N
N
N
 
Recycling Services-General
N
N
N
N
N
N
N
N
N
 
Recycling Services- Processing
N
N
N
N
N
N
N
N
N
 
Repair Service- General
N
N
P
P
P
P
N
N
N
 
Repair Service- Limited
N
N
P
P
P
P
N
N
N
 
Research & Development
N
N
P
P
C
C
P
N
N
 
Restaurants– Full Service
N
N
P/C
P/C
P/C
P/C
C
C
C
In the MU-M, MU-H, N-C or R-C, hours of operation are limited between 5:00 a.m. and 12:00 a.m.; Hours of operation may be modified with approval of a CUP in the MU-H and R-C; In the O, S-P and P-R hours may be further limited by the CUP
Restaurants– General
N
N
P/C
P/C
P/C
P/C
C
C
C
In the in the MU-M, MU-H, N-C or R-C hours of operation are limited between 5:00 a.m. and 12:00 a.m.; Hours of operation may be modified with approval of a CUP in the MU-H and R-C; In the O, S-P and P-R hours may be further limited by the CUP
Restaurants– Outdoor Dining
N
N
P/C
P/C
P/C
P/C
C
C
C
Subject to 18.38.220; In the in the MU-M, MU-H, N-C or R-C hours of operation are limited between 5:00 a.m. and 12:00 a.m.; Hours of operation may be modified with approval of a CUP in the MU-H and R-C; In the O, S-P and P-R hours may be further limited by the CUP
Retail Sales–General
N
N
P
P
P
P
N
N
N
In the in the MU-M, MU-H, N-C or R-C hours of operation are limited between 5:00 a.m. and 12:00 a.m.; Pawn shops, tobacco and vape sales are prohibited
Retail Sales- Kiosks
N
N
M
M
M
M
N
N
M
 
Retail Sales–Outdoor
N
N
C
C
C
C
N
N
N
Subject to 18.38.190 and 18.38.200
Retail Sales–Used Merchandise
N
N
N
N
N
N
N
N
N
 
Self Storage
N
N
N
N
N
C
N
N
N
Subject to City Council Policy No. 7.2; Limited to areas east of Beach Boulevard and North of Lincoln Avenue
Senior Living Facilities (Large)
C
C
C
C
C
C
N
C
N
 
Sober Living Homes (Large)
C
C
C
C
C
C
N
C
N
Subject to § 18.38.123
Sex-Oriented Businesses
N
N
N
N
N
N
N
N
N
 
Short-Term Rentals
N
N
N
N
N
N
N
N
N
 
Smoking Lounge
N
N
N
N
N
N
N
N
N
 
Studios- Broadcasting
N
N
N
N
P/C
P/C
N
N
N
Permitted without a CUP if there is no live audience and located in the N-C or R-C.
Studios- Recording
N
N
C
C
P
P
P
N
N
 
Swap Meets, Indoor and Outdoor
N
N
N
N
N
N
N
N
N
 
Towing Services
N
N
N
N
N
N
N
N
N
 
Transit Facilities
N
N
N
N
C
C
C
C
C
 
Truck Repair & Sales
N
N
N
N
N
N
N
N
N
 
Utilities- Major
N
N
C
C
N
N
N
N
N
 
Utilities- Minor
C
C
P
P
P
P
P
P
P
 
Veterinary Services
N
N
P/C
P/C
P/C
P/C
P/C
P/C
N
Permitted without a conditional use permit when conducted entirely indoors subject to § 18.38.270 and located in the MU-M, MU-H, N-C, R-C, O or S-P.
Warehousing & Storage-Enclose d
N
N
N
N
N
N
N
N
N
 
Wholesaling
N
N
C
C
N
N
N
N
N
Shall be accessory to a Retail Sales use
Wine Bars
N
N
C
C
C
C
N
N
N
 
 
Table 122-C
ACCESSORY USE CLASSES BY DEVELOPMENT AREA
P=Permitted by Right
C=Conditional Use Permit Required
N=Prohibited
T=Telecommunications Antenna Review Permit Required
R-LM
R-M
MU-M
MU-H
N-C
R-C
O
S-P
P-R
Special Provisions
Table 122-C
ACCESSORY USE CLASSES BY DEVELOPMENT AREA
P=Permitted by Right
C=Conditional Use Permit Required
N=Prohibited
T=Telecommunications Antenna Review Permit Required
R-LM
R-M
MU-M
MU-H
N-C
R-C
O
S-P
P-R
Special Provisions
Accessory Dwelling Unit
P
P
P
P
P
P
P
P
P
Permitted when accessory to an existing residential use; Subject to 18.38.015
Accessory Dwelling Unit – Junior
N
N
N
N
N
N
N
N
N
 
Accessory Living Quarters
N
N
N
N
N
N
N
N
N
 
Accessory Entertainment
N
N
P
P
P
P
N
N
N
Subject to 18.16.060
Amusement Devices
N
N
P
P
P
P
N
N
N
Subject to 18.16.050
Animal Keeping
P
P
P
P
N
N
N
N
N
Subject to 18.38.030
Antennas–Dish
P
P
P
P
P
P
P
P
N
Subject to 18.38.050
Antennas–Receiving
P
P
P
P
P
P
P
P
N
Subject to 18.38.050 
Automatic Teller Machines (ATM's)
N
N
P/M
P/M
P/M
P/M
P/M
P/M
P/M
Permitted without a minor conditional use permit if located inside an existing business or on an exterior building wall
Bingo Establishments
N
N
P
P
P
P
C
C
C
Subject to Chapter 7.34
Caretaker Units
P
P
P
P
P
P
N
N
N
Subject to 18.38.090
Day Care–Large Family
P
P
P
P
N
N
N
N
N
 
Day Care–Small Family
P
P
P
P
N
N
N
N
N
 
Entertainment–Accessory
N
N
P
P
P
P
N
N
N
Subject to Section 18.16.060 in conjunction with a commercial use
Fences & Walls
P
P
P
P
P
P
P
P
P
Subject to 18.46.110; this use may occur on a lot without a primary use.
Greenhouses–Pri vate
N
N
N
N
N
N
N
N
N
 
Home Occupations
P
P
P
P
N
N
N
N
N
Subject to 18.38.130
Landscaping & Gardens
P
P
P
P
P
P
P
P
P
Subject to Chapter 18.46; this use may occur on a lot without a primary use.
Mechanical & Utility Equipment – Ground Mounted
P
P
P
P
P
P
P
P
P
Subject to 18.38.160
Mechanical & Utility Equipment – Roof Mounted
P
P
P
P
P
P
P
P
P
Subject to 18.38.170
Outdoor Displays
N
N
P
P
P
P
N
N
N
Subject to 18.38.190
Parking Lots & Garages
P
P
P
P
P
P
P
P
P
To serve needs of on-site primary use only
Petroleum Storage–Incidental
N
N
P
P
N
N
N
N
N
Shall comply with the Uniform Fire Code
Portable Food Carts
N
N
N
N
N
P
N
P
N
Subject to 18.38.210
Recreation Buildings & Structures
P
P
P
P
P
P
P
P
P
 
Recycling Services–Consumer
N
N
N
N
N
N
N
N
N
 
Retail Floor, Wall & Window Coverings
N
N
N
N
N
N
N
N
M
 
Short-Term Rentals
N
N
N
N
N
N
N
N
N
 
Signs
P
P
P
P
P
P
P
P
P
Subject to Chapter 18.44
Solar Energy Panels
P
P
P
P
P
P
P
P
P
Subject to 18.38.170
Thematic Elements
N
N
C
C
C
C
N
N
N
 
Valet Parking
M
M
M
M
M
M
M
M
N
 
Vending Machines
P
P
P
P
P
P
P
P
P
Shall be screened from view from public rights-of-way and shall not encroach onto sidewalks
Warehousing & Storage-Outdoor s
N
N
N
N
N
N
N
N
N
 
 
Table 122-D
TEMPORARY USE CLASSES BY DEVELOPMENT AREA
P=Permitted by Right
C=Conditional Use Permit Required
N=Prohibited
T=Telecommunications Antenna Review Permit Required
R-LM
R-M
MU-M
MU-H
N-C
R-C
O
S-P
P-R
Special Provisions
Table 122-D
TEMPORARY USE CLASSES BY DEVELOPMENT AREA
P=Permitted by Right
C=Conditional Use Permit Required
N=Prohibited
T=Telecommunications Antenna Review Permit Required
R-LM
R-M
MU-M
MU-H
N-C
R-C
O
S-P
P-R
Special Provisions
Carnivals & Circuses
N
N
N
N
N
P
N
P
P
Subject to 18.38.095 and Chapter 3.32
Christmas Tree & Pumpkin Sales
N
N
P
P
P
P
N
P
P
Subject to 18.38.240
Contractor's Office & Storage
P
P
P
P
P
P
P
P
P
Subject to 18.38.105
Real Estate Tract
P
P
P
P
N
N
N
N
N
The office shall be removed at the end of two (2) years from the date of the recording of the subdivision map, or the sale of the last home, whichever is earlier
Real Estate Tract Signs
P
P
P
P
N
N
N
N
N
Subject to Chapter 18.44
Sale of Fireworks
N
N
N
N
P
P
N
N
P
Subject to Chapter 6.40 (Fireworks) of Title 6 (Public Health and Safety)
Special Events
P
P
P
P
P
P
P
P
P
Subject to 18.38.240
 
(Ord. 6453 § 1 (part); December 18, 2018: Ord. 6473 § 51; December 3, 2019: Ord. 6483 § 14; June 9, 2020: Ord. 6493 § 33; September 29, 2020: Ord. 6506 §§ 75 - 77; February 9, 2021: Ord. 6524 § 20; January 25, 2022: Ord. 6555 §§ 74 - 76; April 4, 2023: Ord. 6570 § 43; March 19, 2024: Ord. 6580 § 14; June 11, 2024: Ord. 6601 § 42; January 14, 2025: Ord. 6602 § 9; January 28, 2025: Ord. 6620 §§ 73, 74; January 13, 2026.)

18.122.060 SITE DEVELOPMENT AND DESIGN STANDARDS BY DEVELOPMENT AREA.

   .010   Site Development and Design Standards–General. Site development standards are intended to provide for the continued orderly development of each development area, to assure adequate levels of light, air and density of development, to maintain and enhance the locally recognized values of community appearance, to promote the functional compatibility of uses and the safe and efficient circulation of pedestrian and vehicular traffic, all of which are found to be necessary for the preservation of the community health, safety and general welfare.
   .020   Building Site Requirements. The size and shape of the site proposed for the use shall be adequate to allow the full development of the proposed use in a manner consistent with the stated purpose and intent of the development area within which it is proposed to be developed.
      .0201   Adequate provision shall be made for the safe and orderly circulation of both pedestrian and vehicular traffic between the proposed site and all streets and highways, and between coordinated facilities, access-ways or parking areas on adjacent sites.
      .0202   The proposed development shall not limit or adversely affect the growth and development potential of adjoining lands or the general area in which it is proposed to be located.
      .0203   Adequate provisions shall be made for loading and unloading of supplies and materials, and collection of refuse in a manner that is screened from view and does not obstruct required parking and access-ways or impact adjacent land uses.
   .030   Site Development and Design Standards. Site development and design standards for each Development Area are shown in Tables 122-E through 122-M. Special provisions are referenced in the "Special Provisions" column.
   .040   Modifications of Site Development and Design Standards. The minimum lot width, minimum floor area ratio, maximum structural height, minimum structural and landscape setbacks, minimum dwelling unit floor area and minimum requirements for recreational-leisure areas may be modified in order to achieve a good project design, privacy, livability, and compatibility with surrounding uses, subject to the approval of a conditional use permit.
      .0401   Application. The application for a conditional use permit shall be accompanied by information required by the application form.
      .0402   Findings. The Planning Commission shall make the following findings in conjunction with approval of a conditional use permit to modify site development and design standards:
         (1)   New buildings or structures related to the project are compatible with the scale, mass, bulk, and orientation of existing buildings in the surrounding area, provided the existing buildings conform with the provisions of this title;
         (2)   Vehicular and pedestrian access are adequate;
         (3)   The project is consistent with the General Plan and any applicable design standards of this chapter;
         (4)   The size and shape of the site proposed for the use is adequate to allow the full development of the proposed use in a manner not detrimental to the particular area;
         (5)   The granting of the conditional use permit under the conditions imposed, if any, will not be detrimental to the peace, health, safety and general welfare of the citizens of the City of Anaheim.
         (6)   Floor Area Ratio. An increase in the maximum floor area ratio is subject to the following additional finding: the proposed use of the structure(s) shall not create a greater impact to infrastructure than impacts anticipated by the maximum permitted floor area ratio, as analyzed by Environmental Impact Report No. 350 prepared for the Beach Boulevard Specific Plan, unless such impacts are duly analyzed and mitigated pursuant to subsequent environmental review. Such impacts shall be determined through a sewer and traffic impact analysis to be submitted to the City Engineer. Additional infrastructure studies may be required as determined by the Planning and Building Director.
         (7)   Structural Height. Structures and projections above the height limit are subject to the following additional finding: the proposed increase in structural height shall not create significant impacts onto surrounding properties related to glare, shadow, noise and privacy. Such impacts shall be assessed and determined through studies to be submitted to the Planning and Building Department. Additional studies may be required to analyze other impacts as determined by the Planning and Building Director.
Table 122-E-1
RESIDENTIAL LOW-MEDIUM: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Table 122-E-1
RESIDENTIAL LOW-MEDIUM: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Maximum Dwelling Units per Acre
18
 
Minimum Lot Area
2,400 square feet per dwelling unit
 
Minimum Lot Width
70 feet
Lot widths less than 70 feet minimum may be permitted subject to the approval of a conditional use permit per subsection 18.122.060.040.
Maximum Site Coverage
Residential and accessory structures: 45%
All accessory buildings and structures, except common recreational leisure area buildings, shall be included in the maximum site coverage calculation
Minimum Structural and Landscape Setbacks
Beach Boulevard: 15 feet
Orange Avenue, Lincoln Avenue: 10 feet
Other public roads: 10 feet
Rear abutting interior property line, adjacent to single-family residential: 30 feet
Rear abutting interior property line: 15 feet
Side abutting interior property line, adjacent to single-family residential: 15 feet
Side abutting interior property line: 10 feet
Driveways: 10 feet
Between buildings: 15 feet
Other public roads: 10 feet
Where a building site abuts upon any highway or public street, there shall be a landscape setback, as indicated in this table, measured from the planned highway right-of-way line, as indicated in the Circulation Element of the General Plan
Required setbacks shall be landscaped as set forth in Chapter 18.46 and shall be permanently maintained in a neat and orderly manner
Modifications to setback widths may be allowed subject to the approval of a conditional use permit per subsection 18.122.060.040
Permitted Encroachments within Setback Areas
The front setback may include solid fencing between 3 feet and 5 feet in height
A patio cover or canopy may encroach into the required setback between buildings.
Cornices, eaves, belt courses, sills, buttresses and fireplaces may encroach into a required setback along an interior property line not more than four (4) inches for each one (1) foot of the width of the interior setback, and may encroach into a required street setback not more than thirty (30) inches.
Fixed awnings may encroach into a required setback along an interior property line no more than three (3) feet.
Open, unenclosed balconies may encroach into a required street setback not more than three (3) feet.
Private patios for ground-floor residential units may encroach not more than eight (8) feet abutting a public street, into a required setback along an interior property line or a setback between buildings, but not into required landscape setbacks.
Covered or uncovered porches or landings that do not extend above the level of the first floor of the building, and that include an open railing not more than thirty-six (36) inches in height, may encroach into any required setback not more than five (5) feet.
Decorative guard railings for safety protection around hazardous areas may encroach into any required setback.
The placement of outdoor recreational facilities may encroach into required setbacks between buildings on the same building site.
Trees, shrubs, flowers or plants shall be permitted in any required setback.
Fences and walls that comply with Section 18.46.110 of Chapter 18.46 (Landscaping and Screening) may encroach into required setbacks.
For properties developed with existing ground-floor private patio areas, a maximum ten (10) foot high patio cover may be permitted over the existing permitted patio area.
Any encroachment that conflicts with the Uniform Building Code or other codes, as adopted by the City, shall not be permitted.
Maximum Height
40 feet
3 stories
Structures exceeding the maximum height requirement, including architectural elements such as cupolas, spires, towers and other non-habitable features may exceed the maximum height, subject to the approval of a conditional use permit per subsection 18.122.060.040.
All accessory structures, including but not limited to, garden and storage sheds and recreation structures, shall not exceed a height of one story or 15 feet, whichever is less
Minimum Floor Area
Studio units: 550 square feet
One-bedroom units: 750 square feet
Two-bedroom units: 950 square feet
Three-bedroom units: 1,150 square feet
Four-bedroom units: 1,350 square feet
Studio units shall not exceed 20% of the total number of units
Senior Citizen's Housing is subject to Chapter 18.50
Minimum Requirements for Recreational-Leisure Areas
350 square feet per dwelling unit
Minimum Dimensions
Private areas: 7 feet
Common areas: 20 feet
Pedestrian walkway width: 4 feet
Courtyard internal to a project, or enclosed on at least three sides: 40 feet
Recreational-leisure areas may be provided by private areas, common areas, or a combination of both
All common recreational-leisure areas shall be conveniently located and readily accessible from all dwelling units located on the building site and shall be integrated with, and contiguous to, other common areas on the building site
The common recreational-leisure area may be composed of active or passive facilities, and may incorporate any required setback areas other than street setback areas and required landscape setbacks, but shall not include or incorporate any driveways or parking areas, trash pickup or storage areas or utility areas
All residential common areas shall be improved as either active or passive facilities, with landscaping or hardscape elements designed to serve the residents of the project
All common areas shall be developed and professionally maintained in accordance with approved landscape and irrigation plans
Modifications to these standards may be allowed, subject to the approval of a conditional use permit, per subsection 18.122.060 .040.
 
 
Table 122-E-2
RESIDENTIAL LOW-MEDIUM: SITE DESIGN STANDARDS
Design Standard
Requirements
General Plan
In addition to the design standards below, the provisions of Chapter 18.39 (Multiple-Family and Mixed-Use Objective Design Standards) shall be used as a general guide during the review of all projects
Site Design
New development projects are required to provide convenient pedestrian access to and from public sidewalks from either individual units or a common pedestrian walkway
If adjacent to a single-family zone, the third floor shall be stepped back a minimum of 10 feet
Residential units shall front or side onto Beach Boulevard, Lincoln Avenue and Orange Avenue
Garages and parking areas shall not front onto Beach Boulevard Lincoln Avenue and Orange Avenue
Street frontage devoted to driveways and vehicular access shall be minimized to the greatest extent possible
Consolidated driveways are encouraged along Beach Boulevard
Building Design
Building design shall represent a single architectural style with materials, roof pitch, window design, and other details designed to complement and integrate with the building architecture
Projecting features, such as balconies, porches, bays, and dormer windows are encouraged to create distinction between units and to provide "eyes" on the street
Materials and Color
Buildings shall use durable, high quality materials; Natural stone, precast concrete and factory-finished metal panels (heavy gauge only) are preferred; Plain concrete block, plywood, sheet pressboard, vinyl, and similar materials are strongly discouraged
The finish, texture, and color of materials shall be compatible with the architectural style of the building
Front yard fencing shall be low-scale and in an open-view style that is consistent with the architectural style of the building
Windows
Residential windows should face away from loading areas, docks and trash storage areas The type, size, and location of windows shall be designed to enhance natural daylight and take advantage of natural ventilation
Windows and doors shall be recessed at least three inches from the face of the finished exterior wall to achieve sufficient depth and shadow; Flush finish installations, especially stucco, are not permitted
Windows shall have clear glazing (panes or sheets of glass) or lightly tinted glazing for windows not facing single-family residential; Other types of mirror glazing, including opaque glass, for windows facing single-family residential may be used
 
Table 122-F-1
RESIDENTIAL MEDIUM: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Table 122-F-1
RESIDENTIAL MEDIUM: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Maximum Dwelling Units per Acre
36
 
Minimum Lot Area
1,200 square feet per dwelling unit
 
Minimum Lot Width
150 feet
Lot widths less than 150 feet minimum may be allowed subject to the approval of a conditional use permit per subsection 18.122.060 .040.
Maximum Site Coverage
Residential and accessory structures: 55%
All accessory buildings and structures, except common recreational leisure area buildings, shall be included in the maximum site coverage calculation
Minimum Structural and Landscape Setbacks
Beach Boulevard, Orange Avenue, Lincoln Avenue: 10 feet
Other public roads: 10 feet
Rear abutting interior property line, adjacent to single-family residential: 30 feet
Rear abutting interior property line: 15 feet
Side abutting interior property line, adjacent to single-family residential: 15 feet
Side abutting interior property line: 10 feet
Driveways: 10 feet
Between buildings: 15 feet
Where a building site abuts upon any highway or public street, there shall be a landscape setback, as indicated in this table, measured from the planned highway right-of-way line, as indicated in the Circulation Element of the General Plan
Required setbacks shall be landscaped as set forth in Chapter 18.46 shall be permanently maintained in a neat and orderly manner
Modifications to setback widths may be allowed subject to the approval of a conditional use permit per subsection 18.122.060 .040
Permitted Encroachments within Setback Areas
The front setback may include solid fencing between 3 feet and 5 feet in height
A patio cover or canopy may encroach into the required setback between buildings.
Cornices, eaves, belt courses, sills, buttresses and fireplaces may encroach into a required setback along an interior property line not more than four (4) inches for each one (1) foot of the width of the interior setback, and may encroach into a required street setback not more than thirty (30) inches.
Fixed awnings may encroach into a required setback along an interior property line no more than three (3) feet.
Open, unenclosed balconies may encroach into a required street setback not more than three (3) feet.
Private patios for ground-floor residential units may encroach not more than eight (8) feet abutting a public street, into a required setback along an interior property line or a setback between buildings, but not into required landscape setbacks.
Covered or uncovered porches or landings that do not extend above the level of the first floor of the building, and that include an open railing not more than thirty-six (36) inches in height, may encroach into any required setback not more than five (5) feet.
Decorative guard railings for safety protection around hazardous areas may encroach into any required setback.
The placement of outdoor recreational facilities may encroach into required setbacks between buildings on the same building site.
Trees, shrubs, flowers or plants shall be permitted in any required setback.
Fences and walls that comply with Section 18.46.110 of Chapter 18.46 (Landscaping and Screening) may encroach into required setbacks.
For properties developed with existing ground-floor private patio areas, a maximum ten (10) foot high patio cover may be permitted over the existing permitted patio area.
Any encroachment that conflicts with the Uniform Building Code or other codes, as adopted by the City, shall not be permitted.
Maximum Height
40 feet
3 stories
Structures exceeding the maximum height requirement, including architectural elements such as cupolas, spires, towers and other non-habitable features may exceed the maximum height, subject to the approval of a conditional use permit per subsection 18.122.060 .040.Structures exceeding the maximum height requirement, including architectural elements such as cupolas, spires, towers and other non-habitable features may exceed the maximum height, subject to the approval of a conditional use permit per subsection 18.122.060 .040.
Minimum Floor Area
Studio units: 550 square feet
One-bedroom units: 750 square feet
Two-bedroom units: 950 square feet
Three-bedroom units: 1,150 square feet
Four-bedroom units: 1,350 square feet
Studio units shall not exceed 20% of the total number of units
Senior Citizen's Housing is subject to Chapter 18.50
Minimum Requirements for Recreational-Leisure Areas
200 square feet per dwelling unit
Minimum Dimensions
Private areas:7 feet
Common areas: 20 feet
Pedestrian walkway width: 4 feet
Courtyard internal to a project, or enclosed on at least three sides: 40 feet
Open space and outdoor recreational-leisure areas may be provided by private areas, common areas, or a combination of both
All common recreational-leisure areas shall be conveniently located and readily accessible from all dwelling units located on the building site and shall be integrated with, and contiguous to, other common areas on the building site
The common recreational-leisure area may be composed of active or passive facilities, and may incorporate any required setback areas other than street setback areas and required landscape setbacks, but shall not include or incorporate any driveways or parking areas, trash pickup or storage areas or utility areas
All residential common areas shall be improved as either active or passive facilities, with landscaping or hardscape elements designed to serve the residents of the project
All common areas shall be developed and professionally maintained in accordance with approved landscape and irrigation plans
Modifications to these standards may be allowed, subject to the approval of a conditional use permit, per subsection 18.122.060 .040.
Minimum Requirements for Storage Areas
100 cubic feet of general storage area per dwelling unit
May be provided adjacent to private recreational leisure areas, within garages, or in close proximity to the unit
 
Table 122-F-2
RESIDENTIAL MEDIUM: SITE DESIGN STANDARDS
Design Standard
Requirements
General Plan
In addition to the design standards below, the provisions of Chapter 18.39 (Multiple-Family and Mixed-Use Objective Design Standards) shall be used as a general guide during the review of all projects
Site Design
If adjacent to a single-family residential zone, windows, balconies or similar openings shall be oriented so as not to have a direct line-of-sight into adjacent units or onto private patios or backyards adjoining the property line
There shall be convenient pedestrian access to and from Beach Boulevard from either individual units or a common pedestrian walkway
Residential units shall front or side onto Beach Boulevard, Lincoln Avenue, or Orange Avenue
Ground floor residential fronting or siding onto an arterial roadway shall be elevated at least 21 inches above the finished grade of the sidewalk
Garages and parking areas shall not front onto Beach Boulevard; Street frontage devoted to driveways and vehicular access shall be minimized to the greatest extent possible, consolidated driveways are encouraged along Beach Boulevard
Building Design
Building design shall represent a single architectural style with materials, roof pitch, window design, and other details designed to complement and integrate with the building architecture
Projecting features, such as balconies, porches, bays, and dormer windows are encouraged to create distinction between units and to provide "eyes" on the street
Materials and Color
Buildings shall use durable, high quality materials; Natural stone, precast concrete, and factory-finished metal panels (heavy gauge only) are preferred; Plain concrete block, plywood, sheet pressboard, vinyl, and similar materials are strongly discouraged
The finish, texture, and color of materials shall be compatible with the architectural style of the building
Front yard fencing shall be low-scale and in an open-view style that is consistent with the architectural style of the building
Windows
Residential windows should face away from loading areas, docks and trash storage areas
The type, size, and location of windows shall be designed to enhance natural daylight and take advantage of natural ventilation
Windows and doors shall be recessed at least three inches from the face of the finished exterior wall to achieve sufficient depth and shadow; Flush finish installations, especially stucco, are not permitted
Windows shall have clear glazing (panes or sheets of glass) or lightly tinted glazing for windows not facing single-family residential; Other types of mirror glazing, including opaque glass, for windows facing single-family residential may be used
Table 122-G-1
MIXED-USE MEDIUM: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Table 122-G-1
MIXED-USE MEDIUM: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Maximum Dwelling Units per Acre
36
 
Maximum Floor Area Ratio (FAR)
0.35
Applies only to non-residential uses
All accessory buildings and structures, except common recreational leisure area buildings, shall be included in the maximum floor area ratio coverage calculation
Increases in FAR may be allowed, subject to the approval of a conditional use permit, per subsection 18.122.060 .040.
Minimum/Maximum Structural and Landscape Setbacks
Beach Boulevard, Lincoln Avenue, Orange Avenue, Ball Road: 10 feet minimum; 25 feet maximum for 60% of the linear width of the front of the site
Other public roads: 10 feet minimum
Rear abutting interior property line, adjacent to single-family residential: 30 feet minimum
Rear abutting interior property line: 15 feet minimum
Side abutting interior property line, adjacent to single-family residential: 15 feet minimum
Side abutting interior property line: 10 feet minimum
Driveways: 10 feet minimum
Between buildings: 15 feet minimum
Where a building site abuts upon any highway or public street, there shall be a landscape setback, as indicated in this table, measured from the planned highway right-of-way line, as indicated in the Circulation Element of the General Plan
Outdoor dining located in the front or side of the building must be designed with either a low fence or wall, at least 40-inches high, when fronting a street; Outdoor dining located within a courtyard must also include a low fence or wall if fronting a street
Modifications to setback widths may be allowed subject to the approval of a conditional use permit per subsection 18.122.060 .040
Landscape Requirements within Setback Areas
Abutting public rights-of-way, internal roads and alleys:
•   For ground-floor commercial or live/work units, up to 80 percent of the setback area may be paved
•   For ground-floor residential, the area between residential patios and the sidewalk/walkway shall be fully landscaped
Required setbacks abutting interior property lines and setbacks between buildings shall be landscaped with trees, other plantings, and walkways, as set forth in Chapter 18.46 (Landscaping and Screening)
Fences, walls, and hedges shall comply with Section 18.46.110 (Screening, Fences, Walls, and Hedges)
Landscape and screening requirements of Chapter 18.46 shall apply
Setback areas shall be permanently maintained in a neat and orderly manner
Permitted Encroachments within Setback Areas
Private patios for ground floor residential units may encroach not more than eight (8) feet abutting a public street.
Walkway connections to building entrances
Vehicular and bike access ways
Public art displays, fountains, planters, outdoor seating areas, decorative trash receptacles, public plazas, or other similar amenities and attractive street furnishings that create public gathering areas
Cornices, eaves, belt courses, sills, buttresses and fireplaces may encroach no more than 36 inches
Awnings, canopies and arcades
Balconies may encroach no more than 3 feet
Any encroachment that conflicts with the Uniform Building Code or other codes, as adopted by the City, shall not be permitted.
Maximum Height
40 feet
3 stories
Structures exceeding the maximum height requirement, including architectural elements such as cupolas, spires, towers and other non-habitable features may exceed the maximum height, subject to the approval of a conditional use permit per subsection 18.122.060 .040.
Minimum Ground Floor Height
12 feet
Ground floor heights of more than 12 feet are encouraged
Minimum Floor Area
Studio units: 550 square feet
One-bedroom units: 700 square feet
Two-bedroom units: 825 square feet
Three-bedroom units: 1,000 square feet
Four-bedroom units or more: 1,200 square feet
Applies only to residential uses
Senior Citizen's Housing is subject to Chapter 18.50
Minimum Requirements for Recreational-Leisure Areas – Residential
200 square feet per dwelling unit
Minimum Dimensions
Private areas: 7 feet
Common areas: 20 feet
Pedestrian walkway width: 4 feet
Courtyard internal to a project, or enclosed on at least three sides: 40 feet
Open space and outdoor recreational-leisure areas may be provided by private areas, common areas, or a combination of both
All common recreational-leisure areas shall be conveniently located and readily accessible from all dwelling units located on the building site and shall be integrated with, and contiguous to, other common areas on the building site
The common recreational-leisure area may be composed of active or passive facilities, and may incorporate any required setback areas other than street setback areas and required landscape setbacks, but shall not include or incorporate any driveways or parking areas, trash pickup or storage areas or utility areas
All residential common areas shall be improved as either active or passive facilities, with landscaping or hardscape elements designed to serve the residents of the project
All common areas shall be developed and professionally maintained in accordance with approved landscape and irrigation plans
Minimum Requirements for Recreational-Leisure Areas – Non-residential
Projects 1-2 acres in size: 500 square feet
Projects great than 2 acres in size: 2,000 square feet
Applies to publicly accessible and usable outdoor space
Public plazas, urban pocket parks, outdoor dining, promenades, public art, and other outdoor public amenities shall be designed to activate ground floor uses, engage residents and visitors
Open spaces/ recreational-leisure areas shall be appropriately landscaped and provide adequate shade through the placement of trees or other shade devices including umbrellas, awnings, trellises, and canopies that are integrated into the building or over the open space
Furniture, fixtures, flooring and materials used in open spaces/ recreational-leisure areas shall complement the architectural style of the project
Modifications to these standards may be allowed, subject to the approval of a conditional use permit, per subsection 18.122.060 .040.
Minimum Requirements for Storage Areas
100 cubic feet of general storage area per dwelling unit
May be provided adjacent to private recreational leisure areas, within garages, or in close proximity to the unit
Table 122-G-2
MIXED-USE MEDIUM: SITE DESIGN STANDARDS
Design Standard
Requirements
Table 122-G-2
MIXED-USE MEDIUM: SITE DESIGN STANDARDS
Design Standard
Requirements
General Plan
In addition to the design standards below, the provisions of Chapter 18.39 (Multiple-Family and Mixed-Use Objective Design Standards) shall be used as a general guide during the review of all projects
Site Design
If adjacent to a single-family residential zone, windows, balconies or similar openings shall be oriented so as not to have a direct line-of-sight into adjacent units or onto private patios or backyards adjoining the property line
There shall be convenient pedestrian access to and from Beach Boulevard from either individual units or a common pedestrian walkway
Residential units shall front or side onto Beach Boulevard, Lincoln Avenue, or Orange Avenue
Ground floor residential fronting or siding onto an arterial roadway shall be elevated at least 21 inches above the finished grade of the sidewalk
Garages and parking areas shall not front onto Beach Boulevard; Street frontage devoted to driveways and vehicular access shall be minimized to the greatest extent possible, consolidated driveways are encouraged along Beach Boulevard
Building Design
Building design shall represent a single architectural style with materials, roof pitch, window design, and other details designed to complement and integrate with the building architecture
Projecting features, such as balconies, porches, bays, and dormer windows are encouraged to create distinction between units and to provide "eyes" on the street
All first floor exterior doors shall be hinged for mixed use or commercial only uses; Sliding glass doors are permitted only above the first floor, and on rear or interior side yard elevation not visible from public rights-of-way
Street Façades
Street wall façades shall be architecturally enhanced through the use of arcades, colonnades, recessed entrances, window details, bays, variation in building materials, and other details such as cornices and contrasting colors. Total blank wall areas (without windows or entrances) are prohibited. Building façades shall be articulated through the use of separated wall surfaces, contrasting colors and materials, variations in building setbacks, and attractive window fenestrations. The façade detailing of mixed-use buildings shall visually differentiate ground-floor uses from upper-story uses; The base shall visibly anchor the building to the ground, with a treatment of higher quality materials; The top of the façade shall be visually terminated through the use of cornices, stepped parapets, domes, and other forms of multifaceted building tops. The façade detailing of commercial, retail, or live/work entries shall be differentiated from residential entries.
Frontage Design
Ground floor residential entry stoops, patios, or communal entries shall be elevated at least 21 inches above the finished grade of the sidewalk
Canopies, awnings, signs, balconies and other architectural projections shall clear 10 feet above the adjacent sidewalk and may encroach into the sidewalk up to a maximum of 6 feet, adjusted for parkway trees and street lighting
Buildings shall be designed to front onto Beach Boulevard, Lincoln Avenue, Orange Avenue or Ball Road with primary ground-floor common entries or individual dwelling unit entries oriented to the street, not to the interior or to a parking lot
Where sites include multiple buildings behind the street front buildings, ground-floor entries may be oriented to internal roads or pedestrian greenways
For ground floor retail space, the ground floor elevation exposed to the street shall include a maximum 18-inch recess, measured from the face of the building, within which a commercial tenant may customize storefront design
Main building entrances shall be easily identifiable and distinguishable from other ground floor entries; Such main building entrances shall include at least one of the following:
   •   Marked by a taller mass above the entrance, such as a tower, or within a volume that protrudes from the rest of the building surface
   •   Located in the center of the façade, as part of a symmetrical overall composition
   •   Accented by architectural elements, such as columns, overhanging roofs, awnings, and ornamental light fixtures
   •   Marked or accented by a change in the roofline or change in the roof type
   •   If a corner building, it shall provide prominent corner entrances as noted below for retail or other activity-generating uses
   •   Primary entries shall have direct access from the sidewalk
Corner Treatments
Buildings shall have a major presence at the corners of arterial intersections to enhance the pedestrian experience, and create character and appropriate massing along the roadway; This includes corner cut-offs, corner entrances, and special architectural elements such as:
   •   Diagonal or curved walls at the corner
   •   Tower elements that is visually distinct from the rest of the building massing
   •   Corner plazas or gathering areas
   •   Lobby canopies, overhangs, or other architectural covering over building entries
   •   2-story entrance height and 20-foot entrance widths
   •   Public art installations
   •   Decorative landscaping or landmark elements such as a row of columnar trees
Materials and Color
Buildings shall use durable, high quality materials; Natural stone, precast concrete, and factory-finished metal panels (heavy gauge only) are preferred; Plain concrete block, plywood, sheet pressboard, vinyl, and similar materials are strongly discouraged
The finish, texture, and color of materials shall be compatible with the architectural style of the building
Front yard fencing shall be low-scale and in an open-view style that is consistent with the architectural style of the building
Windows
Residential windows should face away from loading areas, docks and trash storage areas
The type, size, and location of windows shall be designed to enhance natural daylight and take advantage of natural ventilation
Windows and doors shall be recessed at least three inches from the face of the finished exterior wall to achieve sufficient depth and shadow; Flush finish installations, especially stucco, are not permitted
Windows shall have clear glazing (panes or sheets of glass) or lightly tinted glazing for windows not facing single-family residential; Other types of mirror glazing, including opaque glass, for windows facing single-family residential may be used
Rooftop Equipment
Rooftop mechanical equipment shall be mounted behind major rooftop elements such as stair or elevator penthouses, parapets, or architectural projection, so that the equipment is not visible from the adjacent public rights-of-way or adjacent property at grade level
  
Table 122-H-1
MIXED-USE HIGH: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Table 122-H-1
MIXED-USE HIGH: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Maximum Dwelling Units per Acre
60
 
Maximum Floor Area Ratio (FAR)
0.35
Applies only to non-residential uses
All accessory buildings and structures, except common recreational leisure area buildings, shall be included in the maximum floor area ratio coverage calculation
Increases in FAR are permitted subject to Section 18.122.060 .040
Minimum Lot Area
2 acres
 
Minimum/Maximum Structural and Landscape Setbacks
Beach Boulevard, Lincoln Avenue, Orange Avenue: 10 feet minimum; 25 feet maximum for 60% of the linear width of the front of the site
Other public roads: 10 feet minimum
Rear abutting interior property line, adjacent to single-family residential: 30 feet minimum
Rear abutting interior property line: 15 feet minimum
Side abutting interior property line, adjacent to single-family residential: 30 feet minimum
Side abutting interior property line: 10 feet minimum
Driveways: 10 feet minimum
Between buildings: 15 feet minimum
Where a building site abuts upon any highway or public street, there shall be a landscape setback, as indicated in this table, measured from the planned highway right-of-way line, as indicated in the Circulation Element of the General Plan
Modifications to setback widths may be allowed subject to the approval of a conditional use permit per subsection 18.122.060 .040
Outdoor dining located in the front or side of the building must be designed with either a low fence or wall, at least 40-inches high, when fronting a street; Outdoor dining located within a courtyard must also include a low fence or wall if fronting a street
For building over three stories, the fourth floor and above shall be stepped back as follows:
   •   Minimum of a 10 feet from the required rear setback when adjacent to single-family residential
   •   Minimum of 10 feet from the required front setback
Landscape Requirements within Setback Areas
Abutting public rights-of-way, internal roads and alleys:
   •   For ground-floor commercial or live/work units, up to 80 percent of the setback area may be paved
   •   For ground-floor residential, the area between residential patios and the sidewalk/walkway shall be fully landscaped
Required setbacks abutting interior property lines and setbacks between buildings shall be landscaped with trees, other plantings, and walkways, as set forth in Chapter 18.46 (Landscaping and Screening)
Fences, walls, and hedges shall comply with Section 18.46.110 (Screening, Fences, Walls, and Hedges)
Landscape and screening requirements of Chapter 18.46 shall apply
Setback areas shall be permanently maintained in a neat and orderly manner
Permitted Encroachments within Setback Areas
Private patios for ground floor residential units may encroach not more than eight (8) feet abutting a street.
Walkway connections to building entrances
Vehicular and bike access ways
Public art displays, fountains, planters, outdoor seating areas, decorative trash receptacles, public plazas, or other similar amenities and attractive street furnishings that create public gathering areas
Cornices, eaves, belt courses, sills, buttresses and fireplaces may encroach no more than 36 inches
Awnings, canopies and arcades
Balconies may encroach no more than 3 feet
Any encroachment that conflicts with the Uniform Building Code or other codes, as adopted by the City, shall not be permitted.
Maximum Height
55 feet
4 stories
Structures exceeding the maximum height requirement, including architectural elements such as cupolas, spires, towers and other non-habitable features may exceed the maximum height, subject to the approval of a conditional use permit per subsection 18.122.060 .040.
Minimum Ground Floor Height
12 feet
Ground floor heights of more than 12 feet are encouraged
One-story buildings as part of a multi-story development are permitted for a restaurant or other specialty use
Minimum Floor Area
Studio units: 550 square feet
One-bedroom units: 650 square feet
Two-bedroom units: 825 square feet
Three-bedroom units or more: 1,000 square feet
Applies only to residential uses
Senior Citizen's Housing is subject to Chapter 18.50  
Mix of Uses
Sites less than 2.5 acres in size: Stand-alone residential and non-residential projects are permitted
Sites 2.5 acres or greater in size: A mix of residential and non-residential uses shall be provided
The mix of uses can be either vertical or horizontal
Minimum Requirements for Recreational-Leisure Areas – Residential
200 square feet per dwelling unit
Minimum Dimensions
Private areas: 7 feet
Common areas: 20 feet
Pedestrian walkway width: 4 feet
Courtyard internal to a project, or enclosed on at least three sides: 40 feet
Open space and outdoor recreational-leisure areas may be provided by private areas, common areas, or a combination of both
All common recreational-leisure areas shall be conveniently located and readily accessible from all dwelling units located on the building site and shall be integrated with, and contiguous to, other common areas on the building site
The common recreational-leisure area may be composed of active or passive facilities, and may incorporate any required setback areas other than street setback areas and required landscape setbacks, but shall not include or incorporate any driveways or parking areas, trash pickup or storage areas or utility areas
All residential common areas shall be improved as either active or passive facilities, with landscaping or hardscape elements designed to serve the residents of the project
All common areas shall be developed and professionally maintained in accordance with approved landscape and irrigation plans
Minimum Requirements for Recreational-Leisure Areas – Non-residential
Projects 2 acres or less in size: 500 square feet
Projects great than 2 acres in size: 2,500 square feet, plus 500 square feet for every additional 2 acres
Common area minimum dimension: 20 feet
Applies to publicly accessible and usable outdoor space
Outdoor dining areas, plazas, corner gateways or other publicly accessible and usable outdoor space may satisfy this requirement
Public plazas, urban pocket parks, outdoor dining, promenades, public art, and other outdoor public amenities shall be designed to activate ground floor uses, engage residents and visitors
Open spaces/ recreational-leisure areas shall be appropriately landscaped and provide adequate shade through the placement of trees or other shade devices including umbrellas, awnings, trellises, and canopies that are integrated into the building or over the open space
Furniture, fixtures, flooring and materials used in open spaces/ recreational-leisure areas shall complement the architectural style of the project
Modifications to these standards may be allowed, subject to the approval of a conditional use permit, per subsection 18.122.060 .040.
Minimum Requirements for Storage Areas
100 cubic feet of general storage area per dwelling unit
May be provided adjacent to private recreational leisure areas, within garages, or in close proximity to the unit
Table 122-H-2
MIXED-USE HIGH: SITE DESIGN STANDARDS
Design Standard
Requirements
Table 122-H-2
MIXED-USE HIGH: SITE DESIGN STANDARDS
Design Standard
Requirements
General Plan
In addition to the design standards below, the provisions of Chapter 18.39 (Multiple-Family and Mixed-Use Objective Design Standards) shall be used as a general guide during the review of all projects
Site Design
If adjacent to a single-family residential zone, windows, balconies or similar openings shall be oriented so as not to have a direct line-of-sight into adjacent units or onto private patios or backyards adjoining the property line
There shall be convenient pedestrian access to and from Beach Boulevard from either individual units or a common pedestrian walkway
Residential units shall front or side onto Beach Boulevard, Lincoln Avenue, or Orange Avenue
Ground floor residential fronting or siding onto an arterial roadway shall be elevated at least 21 inches above the finished grade of the sidewalk
Garages and parking areas shall not front onto Beach Boulevard; Street frontage devoted to driveways and vehicular access shall be minimized to the greatest extent possible, consolidated driveways are encouraged along Beach Boulevard
Building Design
Building design shall represent a single architectural style with materials, roof pitch, window design, and other details designed to complement and integrate with the building architecture
Projecting features, such as balconies, porches, bays, and dormer windows are encouraged to create distinction between units and to provide "eyes" on the street
All first floor exterior doors shall be hinged; Sliding glass doors are permitted only above the first floor, and on rear or interior side yard elevation not visible from public rights-of-way
Façade
Street wall façades shall be architecturally enhanced through the use of arcades, colonnades, recessed entrances, window details, bays, variation in building materials, and other details such as cornices and contrasting colors. Total blank wall areas (without windows or entrances) are prohibited. Building façades shall be articulated through the use of separated wall surfaces, contrasting colors and materials, variations in building setbacks, and attractive window fenestrations. The façade detailing of mixed-use buildings shall visually differentiate ground-floor uses from upper-story uses; The base shall visibly anchor the building to the ground, with a treatment of higher quality materials; The top of the façade shall be visually terminated through the use of cornices, stepped parapets, domes, and other forms of multifaceted building tops. The façade detailing of commercial, retail, or live/work entries shall be differentiated from residential entries.
Frontage Design
Ground floor residential entry stoops, patios, or communal entries shall be elevated at least 21 inches above the finished grade of the sidewalk
Canopies, awnings, signs, balconies and other architectural projections shall clear 10 feet above the adjacent sidewalk and may encroach into the sidewalk up to a maximum of 6 feet, adjusted for parkway trees and street lighting
Buildings shall be designed to front onto Beach Boulevard, Lincoln Avenue or Orange Avenue with primary ground-floor common entries or individual dwelling unit entries oriented to the street, not to the interior or to a parking lot
Where sites include multiple buildings behind the street front buildings, ground-floor entries may be oriented to internal roads or pedestrian greenways
For ground floor retail space, the ground floor elevation exposed to the street shall include a maximum 18-inch recess, measured from the face of the building, within which a commercial tenant may customize storefront design
Main building entrances shall be easily identifiable and distinguishable from other ground floor entries; Such main building entrances shall include at least one of the following:
   •   Marked by a taller mass above the entrance, such as a tower, or within a volume that protrudes from the rest of the building surface
   •   Located in the center of the façade, as part of a symmetrical overall composition
   •   Accented by architectural elements, such as columns, overhanging roofs, awnings, and ornamental light fixtures
   •   Marked or accented by a change in the roofline or change in the roof type
   •   If a corner building, it shall provide prominent corner entrances as noted below for retail or other activity-generating uses
   •   Primary entries shall have direct access from the sidewalk
Corner Treatments
Buildings shall have a major presence at the corners of arterial intersections to enhance the pedestrian experience, and create character and appropriate massing along the roadway; This includes corner cut-offs, corner entrances, and special architectural elements such as:
   •   Diagonal or curved walls at the corner
   •   Tower elements that is visually distinct from the rest of the building massing
   •   Corner plazas or gathering areas
   •   Lobby canopies, overhangs, or other architectural covering over building entries
   •   2-story entrance height and 20-foot entrance widths
   •   Public art installations
   •   Decorative landscaping or landmark elements such as a row of columnar trees
Materials and Color
Buildings shall use durable, high quality materials; Natural stone, precast concrete, and factory-finished metal panels (heavy gauge only) are preferred; Plain concrete block, plywood, sheet pressboard, vinyl, and similar materials are strongly discouraged
The finish, texture, and color of materials shall be compatible with the architectural style of the building
Front yard fencing shall be low-scale and in an open-view style that is consistent with the architectural style of the building
Windows
Residential windows should face away from loading areas, docks and trash storage areas
The type, size, and location of windows shall be designed to enhance natural daylight and take advantage of natural ventilation
Windows and doors shall be recessed at least three inches from the face of the finished exterior wall to achieve sufficient depth and shadow; Flush finish installations, especially stucco, are not permitted
Windows shall have clear glazing (panes or sheets of glass) or lightly tinted glazing for windows not facing single-family residential; Other types of mirror glazing, including opaque glass, for windows facing single-family residential may be used
Rooftop Equipment
Rooftop mechanical equipment shall be mounted behind major rooftop elements such as stair or elevator penthouses, parapets, or architectural projection, so that the equipment is not visible from the adjacent public rights-of-way or adjacent property at grade level
Table 122-I-1
NEIGHBORHOOD COMMERCIAL: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Table 122-I-1
NEIGHBORHOOD COMMERCIAL: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Maximum Floor Area Ratio (FAR)
0.35
All accessory buildings and structures, except common recreational leisure area buildings, shall be included in the maximum floor area ratio coverage calculation
Increases in FAR are permitted subject to Section 18.122.060.040
Minimum Lot Area
1 acre per project site
Minimum/Maximum Structural and Landscape Setbacks
Beach Boulevard, Ball Road: 10 feet minimum; 20 feet maximum for 25% of the linear width of the front of the site
Rear abutting interior property line, adjacent to single-family residential: 15 feet minimum
Rear abutting interior property line: 0 feet minimum
Side abutting interior property line, adjacent to single-family residential: 15 feet minimum
Side abutting interior property line: 0 feet minimum
Internal street, driveway, drive aisle or alley: 5 feet minimum with 16 feet minimum for 50% of all buildings
Between buildings: 0 feet minimum
Where a building site abuts upon any highway or public street, there shall be a landscape setback, as indicated in this table, measured from the planned highway right-of-way line, as indicated in the Circulation Element of the General Plan
Greater setbacks for entry plazas, courtyards or outdoor dining patios may be permitted
Outdoor dining located in the front or side of the building must be designed with either a low fence or wall, at least 40-inches high, when fronting a street; Outdoor dining located within a courtyard must also include a low fence or wall if fronting a street
Internal sidewalks and walkways shall include pedestrian amenities such as outdoor dining, seating areas, public art, landscaping and safety bollards
Modifications to setback widths may be allowed subject to the approval of a conditional use permit per subsection 18.122.060.040
Landscape Requirements within Setback Areas
Setbacks abutting public rights-of-way, internal streets, driveways, drive aisles and alleys shall be improved with landscaping and/or hardscaping in accordance with Chapter 18.46 (Landscaping and Screening)
Landscaping shall be layered in varying heights to provide interest along street frontages
Required setbacks abutting interior property lines and setbacks between buildings shall be landscaped with trees, other plantings, and walkways, as set forth in Chapter 18.46 (Landscaping and Screening)
Fences, walls, and hedges shall comply with Section 18.46.110 (Screening, Fences, Walls, and Hedges)
Landscape and screening requirements of Chapter 18.46 shall apply
Setback areas shall be permanently maintained in a neat and orderly manner
Permitted Encroachments within Setback Areas
Walkway connections to building entrances
Vehicular and bike access ways
Public art displays, fountains, planters, outdoor seating areas, decorative trash receptacles, public plazas, or other similar amenities and attractive street furnishings that create public gathering areas
Cornices, eaves, belt courses, sills, buttresses and fireplaces may encroach no more than 36 inches
Awnings, canopies and arcades
Fences and walls that comply with Section 18.46.110 may encroach into any required street landscape and structural setback
Signage in accordance with Chapter 18.44
Any encroachment that conflicts with the Uniform Building Code or other codes, as adopted by the City, shall not be permitted.
Maximum Height
45 feet
If adjacent to single-family residential: 28 feet within 30 feet of the property line shared with single-family residential properties
Structures exceeding the maximum height requirement, including architectural elements such as cupolas, spires, towers and other non-habitable features may exceed the maximum height, subject to the approval of a conditional use permit per subsection 18.122.060.040.
Minimum Ground Floor Height
12 feet
Ground floor heights of more than 12 feet are encouraged
Minimum Requirements for Recreational-Leisure Areas
Projects 2 acres or less in size: 500 square feet
Projects greater than 2 acres in size: 2,500 square feet, plus 500 square feet for every additional 2 acres
Common area minimum dimension: 20 feet
Applies to publicly accessible and usable outdoor space
Yard setbacks may be included in satisfying this requirement if integrated with the design of the open space area
Outdoor dining areas, plazas, corner gateways or other publicly accessible and usable outdoor space may be included to satisfy this requirement
Public plazas, urban pocket parks, outdoor dining, promenades, public art, and other outdoor public amenities shall be designed to activate ground floor uses and engage visitors
Open spaces/ recreational-leisure areas shall be appropriately landscaped and provide adequate shade through the placement of trees or other shade devices including umbrellas, awnings, trellises, and canopies that are integrated into the building or over the open space
Furniture, fixtures, flooring and materials used in open spaces/ recreational-leisure areas shall complement the architectural style of the project
Modifications to these standards may be allowed, subject to the approval of a conditional use permit, per subsection 18.122.060.040.
Table 122-I-2
NEIGHBORHOOD COMMERCIAL: SITE DESIGN STANDARDS
Design Standard
Requirements
Table 122-I-2
NEIGHBORHOOD COMMERCIAL: SITE DESIGN STANDARDS
Design Standard
Requirements
General Plan
In addition to the design standards below, the provisions of Chapter 18.39 (Multiple-Family and Mixed-Use Objective Design Standards) shall be used as a general guide during the review of all projects
Site Design
Sites with multiple buildings shall be clustered to the extent possible with shared outdoor spaces and with direct pedestrian access between uses, and from parking areas and the street
Loading and unloading areas and collection of refuse shall be located to the rear of the building, screened from view, and shall not obstruct required parking and access ways
Building Design
Building design shall represent a single architectural style; materials, roof pitch, window design, and other details must be consistent with that style
Façade
Street wall façades shall be architecturally enhanced through the use of arcades, colonnades, recessed entrances, window details, bays, variation in building materials, and other details such as cornices and contrasting colors. Total blank wall areas (without windows or entrances) are prohibited. Building façades shall be articulated through the use of separated wall surfaces, contrasting colors and materials, variations in building setbacks, and attractive window fenestrations. The façade detailing of buildings with multiple floors shall visually differentiate ground-floor uses from upper-story uses; The base shall visibly anchor the building to the ground, with a treatment of higher quality materials; The top of the façade shall be visually terminated through the use of cornices, stepped parapets, domes, and other forms of multifaceted building tops. 
Frontage Design
Canopies, awnings, signs, balconies and other architectural projections shall clear 10 feet above the adjacent sidewalk and may encroach into the sidewalk up to a maximum of 6 feet, adjusted for parkway trees and street lighting
For ground floor retail space, the ground floor elevation exposed to the street shall include a maximum 18-inch recess, measured from the face of the building, within which a commercial tenant may customize storefront design
Main building entrances shall be easily identifiable and distinguishable from other ground floor entries; Such main building entrances shall include at least one of the following:
   •   Marked by a taller mass above the entrance, such as a tower, or within a volume that protrudes from the rest of the building surface
   •   Located in the center of the façade, as part of a symmetrical overall composition
   •   Accented by architectural elements, such as columns, overhanging roofs, awnings, and ornamental light fixtures
   •   Marked or accented by a change in the roofline or change in the roof type
   •   If a corner building, it shall provide prominent corner entrances as noted below for retail or other activity-generating uses
Corner Treatments
Buildings shall have a major presence at the corners of arterial intersections to enhance the pedestrian experience, and create character and appropriate massing along the roadway; This includes corner cut-offs, corner entrances, and special architectural elements such as:.Diagonal or curved walls at the corner
   •   Tower elements that is visually distinct from the rest of the building massing
   •   Corner plazas or gathering areas
   •   Lobby canopies, overhangs, or other architectural covering over building entries
   •   2-story entrance height and 20-foot entrance widths
   •   Public art installations
   •   Decorative landscaping or landmark elements such as a row of columnar trees
Materials and Color
Buildings shall use durable, high quality materials; Natural stone, precast concrete, and factory-finished metal panels (heavy gauge only) are preferred; Plain concrete block, plywood, sheet pressboard, vinyl, and similar materials are strongly discouraged
The finish, texture, and color of materials shall be compatible with the architectural style of the building   
Front yard fencing shall be low-scale and in an open-view style that is consistent with the architectural style of the building
Windows
Residential windows should face away from loading areas, docks and trash storage areas
The type, size, and location of windows shall be designed to enhance natural daylight and take advantage of natural ventilation
Windows and doors shall be recessed at least 3 inches from the face of the finished exterior wall to achieve sufficient depth and shadow; Flush finish installations, especially stucco, are not permitted
Windows shall have clear glazing (panes or sheets of glass) or lightly tinted glazing for windows not facing single-family residential; Other types of mirror glazing, including opaque glass, for windows facing single-family residential may be used
Rooftop Equipment
Rooftop mechanical equipment shall be mounted behind major rooftop elements such as stair or elevator penthouses, parapets, or architectural projection, so that the equipment is not visible from the adjacent public rights-of-way or adjacent property at grade level
Table 122-J-1
REGIONAL COMMERCIAL: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Table 122-J-1
REGIONAL COMMERCIAL: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Maximum Floor Area Ratio (FAR)
0.35
All accessory buildings and structures, except common recreational leisure area buildings, shall be included in the maximum floor area ratio coverage calculation
Increases in FAR are permitted subject to Section 18.122.060.040
Minimum Lot Area
None
Minimum/Maximum Structural and Landscape Setbacks
Beach Boulevard, Lincoln Avenue: 10 feet minimum; 20 feet maximum for 60% of the linear width of the front of the site
Rear abutting interior property line, adjacent to single-family residential: 15 feet minimum
Rear abutting interior property line: 0 feet minimum
Side abutting interior property line, adjacent to single-family residential: 15 feet minimum
Side abutting interior property line: 0 feet minimum
Internal street, driveway, drive aisle or alley: 5 feet minimum with 16 feet minimum for 50% of all buildings
Between buildings: 0 feet minimum
Where a building site abuts upon any highway or public street, there shall be a landscape setback, as indicated in this table, measured from the planned highway right-of-way line, as indicated in the Circulation Element of the General Plan
Greater setbacks for entry plazas, courtyards or outdoor dining patios may be permitted
Outdoor dining located in the front or side of the building must be designed with either a low fence or wall, at least 40-inches high, when fronting a street; Outdoor dining located within a courtyard must also include a low fence or wall if fronting a street
Internal sidewalks and walkways shall include pedestrian amenities such as outdoor dining, seating areas, public art, landscaping and safety bollards
Modifications to setback widths may be allowed subject to the approval of a conditional use permit per subsection 18.122.060.040
Landscape Requirements within Setback Areas
Setbacks abutting public rights-of-way, internal streets, driveways, drive aisles and alleys shall be improved with landscaping and/or hardscaping in accordance with Chapter 18.46 (Landscaping and Screening)
Landscaping shall be layered in varying heights to provide interest along street frontages
Required setbacks abutting interior property lines and setbacks between buildings shall be landscaped with trees, other plantings, and walkways, as set forth in Chapter 18.46 (Landscaping and Screening)
Fences, walls, and hedges shall comply with Section 18.46.110 (Screening, Fences, Walls, and Hedges)
Landscape and screening requirements of Chapter 18.46 shall apply
Setback areas shall be permanently maintained in a neat and orderly manner
Permitted Encroachments within Setback Areas
Walkway connections to building entrances
Vehicular and bike access ways
Public art displays, fountains, planters, outdoor seating areas, decorative trash receptacles, public plazas, or other similar amenities and attractive street furnishings that create public gathering areas
Cornices, eaves, belt courses, sills, buttresses and fireplaces may encroach no more than 36 inches
Awnings, canopies and arcades
Fences and walls that comply with Section 18.46.110 may encroach into any required street landscape and structural setback
Signage in accordance with Chapter 18.44
Any encroachment that conflicts with the Uniform Building Code or other codes, as adopted by the City, shall not be permitted.
Maximum Height
45 feet
If adjacent to single-family residential: 28 feet within 30 feet of the property line shared with single-family residential properties
Structures exceeding the maximum height requirement, including architectural elements such as cupolas, spires, towers and other non-habitable features may exceed the maximum height, subject to the approval of a conditional use permit per subsection 18.122.060.040.
Minimum Ground Floor Height
12 feet
Ground floor heights of more than 12 feet are encouraged
Minimum Requirements for Recreational-Leisure Areas
Projects 2 acres or less in size: 500 square feet
Projects great than 2 acres in size: 2,500 square feet, plus 500 square feet for every additional 2 acres
Common area minimum dimension: 20 feet
Applies to publicly accessible and usable outdoor space
Yard setbacks may be included in satisfying this requirement if integrated with the design of the open space area
Outdoor dining areas, plazas, corner gateways or other publicly accessible and usable outdoor space may be included to satisfy this requirement
Public plazas, urban pocket parks, outdoor dining, promenades, public art, and other outdoor public amenities shall be designed to activate ground floor uses and engage visitors
Open spaces/ recreational-leisure areas shall be appropriately landscaped and provide adequate shade through the placement of trees or other shade devices including umbrellas, awnings, trellises, and canopies that are integrated into the building or over the open space
Furniture, fixtures, flooring and materials used in open spaces/ recreational-leisure areas shall complement the architectural style of the project
Modifications to these standards may be allowed, subject to the approval of a conditional use permit, per subsection 18.122.060.040.
Table 122-J-2
REGIONAL COMMERCIAL: SITE DESIGN STANDARDS
Design Standard
Requirements
Table 122-J-2
REGIONAL COMMERCIAL: SITE DESIGN STANDARDS
Design Standard
Requirements
General Plan
In addition to the design standards below, the provisions of Chapter 18.39 (Multiple-Family and Mixed-Use Objective Design Standards) shall be used as a general guide during the review of all projects
Site Design
Sites with multiple buildings shall be clustered to the extent possible with shared outdoor spaces and with direct pedestrian access between uses, and from parking areas and the street
Loading and unloading areas and collection of refuse shall be located to the rear of the building, screened from view, and shall not obstruct required parking and access ways
Building Design
Building design shall represent a single architectural style; materials, roof pitch, window design, and other details must be consistent with that style
Façade
Street wall façades shall be architecturally enhanced through the use of arcades, colonnades, recessed entrances, window details, bays, variation in building materials, and other details such as cornices and contrasting colors. Total blank wall areas (without windows or entrances) are prohibited. Building façades shall be articulated through the use of separated wall surfaces, contrasting colors and materials, variations in building setbacks, and attractive window fenestrations. The façade detailing of buildings with multiple floors shall visually differentiate ground-floor uses from upper-story uses; The base shall visibly anchor the building to the ground, with a treatment of higher quality materials; The top of the façade shall be visually terminated through the use of cornices, stepped parapets, domes, and other forms of multifaceted building tops.
Frontage Design
Canopies, awnings, signs, balconies and other architectural projections shall clear 10 feet above the adjacent sidewalk and may encroach into the sidewalk up to a maximum of 6 feet, adjusted for parkway trees and street lighting
For ground floor retail space, the ground floor elevation exposed to the street shall include a maximum 18-inch recess, measured from the face of the building, within which a commercial tenant may customize storefront design
Main building entrances shall be easily identifiable and distinguishable from other ground floor entries; Such main building entrances shall include at least one of the following:
   •   Marked by a taller mass above the entrance, such as a tower, or within a volume that protrudes from the rest of the building surface
   •   Located in the center of the façade, as part of a symmetrical overall composition
   •   Accented by architectural elements, such as columns, overhanging roofs, awnings, and ornamental light fixtures
   •   Marked or accented by a change in the roofline or change in the roof type
   •   If a corner building, it shall provide prominent corner entrances as noted below for retail or other activity-generating uses
Corner Treatments
Buildings shall have a major presence at the corners of arterial intersections to enhance the pedestrian experience, and create character and appropriate massing along the roadway; This includes corner cut-offs, corner entrances, and special architectural elements such as:
   •   Diagonal or curved walls at the corner
   •   Tower elements that is visually distinct from the rest of the building massing
   •   Corner plazas or gathering areas
   •   Lobby canopies, overhangs, or other architectural covering over building entries
   •   2-story entrance height and 20-foot entrance widths
   •   Public art installations
   •   Decorative landscaping or landmark elements such as a row of columnar trees
Materials and Color
Buildings shall use durable, high quality materials; Natural stone, precast concrete, and factory-finished metal panels (heavy gauge only) are preferred; Plain concrete block, plywood, sheet pressboard, vinyl, and similar materials are strongly discouraged
The finish, texture, and color of materials shall be compatible with the architectural style of the building
Front yard fencing shall be low-scale and in an open-view style that is consistent with the architectural style of the building
Windows
Residential windows should face away from loading areas, docks and trash storage areas
The type, size, and location of windows shall be designed to enhance natural daylight and take advantage of natural ventilation
Windows and doors shall be recessed at least 3 inches from the face of the finished exterior wall to achieve sufficient depth and shadow; Flush finish installations, especially stucco, are not permitted
Windows shall have clear glazing (panes or sheets of glass) or lightly tinted glazing for windows not facing single-family residential; Other types of mirror glazing, including opaque glass, for windows facing single-family residential may be used
Rooftop Equipment
Rooftop mechanical equipment shall be mounted behind major rooftop elements such as stair or elevator penthouses, parapets, or architectural projection, so that the equipment is not visible from the adjacent public rights-of-way or adjacent property at grade level
Table 122-K-1
OFFICE: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Table 122-K-1
OFFICE: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Maximum Floor Area Ratio (FAR)
0.50
All accessory buildings and structures, except common recreational leisure area buildings, shall be included in the maximum floor area ratio coverage calculation
Increases in FAR are permitted subject to Section 18.122.060.040
Minimum Lot Area
None
Minimum/Maximum Structural and Landscape Setbacks
Beach Boulevard: 10 feet minimum; 20 feet maximum for 60% of the linear width of the front of the site
Rear abutting interior property line, adjacent to single-family residential: 30 feet minimum
Rear abutting interior property line: 0 feet minimum
Side abutting interior property line, adjacent to single-family residential: 15 feet minimum
Side abutting interior property line: 0 feet minimum
Internal street, driveway, drive aisle or alley: 10 feet minimum
Between buildings: 0 feet minimum
Does not apply to expansions
Where a building site abuts upon any highway or public street, there shall be a landscape setback, as indicated in this table, measured from the planned highway right-of-way line, as indicated in the Circulation Element of the General Plan
Modifications to setback widths may be allowed subject to the approval of a conditional use permit per subsection 18.122.060.040
Landscape Requirements within Setback Areas
Setbacks abutting public rights-of-way, internal streets, driveways, drive aisles and alleys shall be improved with landscaping and/or hardscaping in accordance with Chapter 18.46 (Landscaping and Screening)
Landscaping shall be layered in varying heights to provide interest along street frontages
Required setbacks abutting interior property lines and setbacks between buildings shall be landscaped with trees, other plantings, and walkways, as set forth in Chapter 18.46 (Landscaping and Screening)
Fences, walls, and hedges shall comply with Section 18.46.110 (Screening, Fences, Walls, and Hedges)
Landscape and screening requirements of Chapter 18.46 shall apply
Setback areas shall be permanently maintained in a neat and orderly manner
Permitted Encroachments within Setback Areas
Walkway connections to building entrances
Vehicular and bike access ways
Public art displays, fountains, planters, outdoor seating areas, decorative trash receptacles, public plazas, or other similar amenities and attractive street furnishings that create public gathering areas
Cornices, eaves, belt courses, sills, buttresses and fireplaces may encroach no more than 36 inches
Awnings, canopies and arcades
Fences and walls that comply with Section 18.46.110 may encroach into any required street landscape and structural setback
Signage in accordance with Chapter 18.44
Any encroachment that conflicts with the Uniform Building Code or other codes, as adopted by the City, shall not be permitted.
Maximum Height
40 feet
3 stories
Structures exceeding the maximum height requirement, including architectural elements such as cupolas, spires, towers and other non-habitable features may exceed the maximum height, subject to the approval of a conditional use permit per subsection 18.122.060.040.
Minimum Ground Floor Height
12 feet
Ground floor heights of more than 12 feet are encouraged
Minimum Requirements for Recreational-Leisure Areas
Common area minimum dimension: 20 feet
Applies to publicly accessible and usable outdoor space
Yard setbacks may be included in satisfying this requirement if integrated with the design of the open space area
Outdoor dining areas, plazas, corner gateways or other publicly accessible and usable outdoor space may be included to satisfy this requirement
Public plazas, urban pocket parks, outdoor dining, promenades, public art, and other outdoor public amenities shall be designed to activate ground floor uses and engage visitors
Open spaces/ recreational-leisure areas shall be appropriately landscaped and provide adequate shade through the placement of trees or other shade devices including umbrellas, awnings, trellises, and canopies that are integrated into the building or over the open space
Furniture, fixtures, flooring and materials used in open spaces/ recreational-leisure areas shall complement the architectural style of the project
Modifications to these standards may be allowed, subject to the approval of a conditional use permit, per subsection 18.122.060.040.
Table 122-K-2
OFFICE: SITE DESIGN STANDARDS
Design Standard
Requirements
Table 122-K-2
OFFICE: SITE DESIGN STANDARDS
Design Standard
Requirements
General Plan
In addition to the design standards below, the provisions of Chapter 18.39 (Multiple-Family and Mixed-Use Objective Design Standards) shall be used as a general guide during the review of all projects
Site Design
Sites with multiple buildings shall be clustered to the extent possible with shared outdoor spaces and with direct pedestrian access between uses, and from parking areas and the street
Loading and unloading areas and collection of refuse shall be located to the rear of the building, screened from view, and shall not obstruct required parking and access ways
Building Design
Building design shall represent a single architectural style; materials, roof pitch, window design, and other details must be consistent with that style
Façade
Street wall façades shall be architecturally enhanced through the use of arcades, colonnades, recessed entrances, window details, bays, variation in building materials, and other details such as cornices and contrasting colors. Total blank wall areas (without windows or entrances) are prohibited. Building façades shall be articulated through the use of separated wall surfaces, contrasting colors and materials, variations in building setbacks, and attractive window fenestrations. The façade detailing of buildings with multiple floors shall visually differentiate ground-floor uses from upper-story uses; The base shall visibly anchor the building to the ground, with a treatment of higher quality materials; The top of the façade shall be visually terminated through the use of cornices, stepped parapets, domes, and other forms of multifaceted building tops.
Frontage Design
Canopies, awnings, signs, balconies and other architectural projections shall clear 10 feet above the adjacent sidewalk and may encroach into the sidewalk up to a maximum of 6 feet, adjusted for parkway trees and street lighting
Main building entrances shall be easily identifiable and distinguishable from other ground floor entries; Such main building entrances shall include at least one of the following:
   •   Marked by a taller mass above the entrance, such as a tower, or within a volume that protrudes from the rest of the building surface
   •   Located in the center of the façade, as part of a symmetrical overall composition
   •   Accented by architectural elements, such as columns, overhanging roofs, awnings, and ornamental light fixtures
   •   Marked or accented by a change in the roofline or change in the roof type
   •   If a corner building, it shall provide prominent corner entrances as noted below for retail or other activity-generating uses
Materials and Color
Buildings shall use durable, high quality materials; Natural stone, precast concrete, and factory-finished metal panels (heavy gauge only) are preferred; Plain concrete block, plywood, sheet pressboard, vinyl, and similar materials are strongly discouraged
The finish, texture, and color of materials shall be compatible with the architectural style of the building
Front yard fencing shall be low-scale and in an open-view style that is consistent with the architectural style of the building
Windows
The type, size, and location of windows shall be designed to enhance natural daylight and take advantage of natural ventilation
Windows and doors shall be recessed at least 3 inches from the face of the finished exterior wall to achieve sufficient depth and shadow; Flush finish installations, especially stucco, are not permitted
Windows shall have clear glazing (panes or sheets of glass) or lightly tinted glazing for windows not facing single-family residential; Other types of mirror glazing, including opaque glass, for windows facing single-family residential may be used
Rooftop Equipment
Rooftop mechanical equipment shall be mounted behind major rooftop elements such as stair or elevator penthouses, parapets, or architectural projection, so that the equipment is not visible from the adjacent public rights-of-way or adjacent property at grade level
Table 122-L-1
SEMI-PUBLIC: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Table 122-L-1
SEMI-PUBLIC: SITE DEVELOPMENT STANDARDS
Development Standards
Special Provisions
Maximum Floor Area Ratio (FAR)
1.0
All accessory buildings and structures, except common recreational leisure area buildings, shall be included in the maximum floor area ratio coverage calculation
Increases in FAR are permitted subject to Section 18.122.060.040
Minimum Lot Area
None
Minimum/Maximum Structural and Landscape Setbacks
Beach Boulevard, Orange Avenue: 10 feet minimum; 20 feet maximum for 60% of the linear width of the front of the site
Rear abutting interior property line, adjacent to single-family residential: 10 feet minimum for first floor; 30 feet minimum for second story and above
Rear abutting interior property line: 0 feet minimum
Side abutting interior property line, adjacent to single-family residential: 10 feet minimum for first floor; 30 feet minimum for second story and above
Side abutting interior property line: 0 feet minimum
Internal street, driveway, drive aisle or alley: 10 feet minimum
Between buildings: 0 feet minimum
Where a building site abuts upon any highway or public street, there shall be a landscape setback, as indicated in this table, measured from the planned highway right-of-way line, as indicated in the Circulation Element of the General Plan
Additional setbacks for entry plazas, courtyards or patios may be permitted
Modifications to setback widths may be allowed subject to the approval of a conditional use permit per subsection 18.122.060.040
Landscape Requirements within Setback Areas
Setbacks abutting public rights-of-way, internal streets, driveways, drive aisles and alleys shall be improved with landscaping and/or hardscaping in accordance with Chapter 18.46 (Landscaping and Screening)
Landscaping shall be layered in varying heights to provide interest along street frontages
Required setbacks abutting interior property lines and setbacks between buildings shall be landscaped with trees, other plantings, and walkways, as set forth in Chapter 18.46 (Landscaping and Screening)
Fences, walls, and hedges shall comply with Section 18.46.110 (Screening, Fences, Walls, and Hedges)
Landscape and screening requirements of Chapter 18.46 shall apply
Setback areas shall be permanently maintained in a neat and orderly manner
Permitted Encroachments within Setback Areas
Walkway connections to building entrances
Vehicular and bike access ways
Public art displays, fountains, planters, outdoor seating areas, decorative trash receptacles, public plazas, or other similar amenities and attractive street furnishings that create public gathering areas
Cornices, eaves, belt courses, sills, buttresses and fireplaces may encroach no more than 36 inches
Awnings, canopies and arcades
Fences and walls that comply with Section 18.46.110 may encroach into any required street landscape and structural setback
Signage in accordance with Chapter 18.44
Any encroachment that conflicts with the Uniform Building Code or other codes, as adopted by the City, shall not be permitted.
Maximum Height
55 feet
Structures exceeding the maximum height requirement, including architectural elements such as cupolas, spires, towers and other non-habitable features may exceed the maximum height, subject to the approval of a conditional use permit per subsection 18.122.060.040.
Minimum Ground Floor Height
12 feet
Ground floor heights of more than 12 feet are encouraged
Minimum Requirements for Recreational-Leisure Areas
Common area minimum dimension: 20 feet
Applies to publicly accessible and usable outdoor space
Yard setbacks may be included in satisfying this requirement if integrated with the design of the open space area
Outdoor dining areas, plazas, corner gateways or other publicly accessible and usable outdoor space may be included to satisfy this requirement
Public plazas, urban pocket parks, outdoor dining, promenades, public art, and other outdoor public amenities shall be designed to activate ground floor uses and engage visitors
Open spaces/ recreational-leisure areas shall be appropriately landscaped and provide adequate shade through the placement of trees or other shade devices including umbrellas, awnings, trellises, and canopies that are integrated into the building or over the open space
Furniture, fixtures, flooring and materials used in open spaces/ recreational-leisure areas shall complement the architectural style of the project
Modifications to these standards may be allowed, subject to the approval of a conditional use permit, per subsection 18.122.060.040.
Table 122-L-2
SEMI-PUBLIC: SITE DESIGN STANDARDS
Design Standard
Requirements
Table 122-L-2
SEMI-PUBLIC: SITE DESIGN STANDARDS
Design Standard
Requirements
General Plan
In addition to the design standards below, the provisions of Chapter 18.39 (Multiple-Family and Mixed-Use Objective Design Standards) shall be used as a general guide during the review of all projects
Site Design
Sites with multiple buildings shall be clustered to the extent possible with shared outdoor spaces and with direct pedestrian access between uses, and from parking areas and the street
Loading and unloading areas and collection of refuse shall be located to the rear of the building, screened from view, and shall not obstruct required parking and access ways
Building Design
Building design shall represent a single architectural style; materials, roof pitch, window design, and other details must be consistent with that style
Façade
Street wall façades shall be architecturally enhanced through the use of arcades, colonnades, recessed entrances, window details, bays, variation in building materials, and other details such as cornices and contrasting colors. Total blank wall areas (without windows or entrances) are prohibited. Building façades shall be articulated through the use of separated wall surfaces, contrasting colors and materials, variations in building setbacks, and attractive window fenestrations. The façade detailing of buildings with multiple floors shall visually differentiate ground-floor uses from upper-story uses; The base shall visibly anchor the building to the ground, with a treatment of higher quality materials; The top of the façade shall be visually terminated through the use of cornices, stepped parapets, domes, and other forms of multifaceted building tops.
Frontage Design
Canopies, awnings, signs, balconies and other architectural projections shall clear 10 feet above the adjacent sidewalk and may encroach into the sidewalk up to a maximum of 6 feet, adjusted for parkway trees and street lighting
Main building entrances shall be easily identifiable and distinguishable from other ground floor entries; Such main building entrances shall include at least one of the following:
   •   Marked by a taller mass above the entrance, such as a tower, or within a volume that protrudes from the rest of the building surface
   •   Located in the center of the façade, as part of a symmetrical overall composition
   •   Accented by architectural elements, such as columns, overhanging roofs, awnings, and ornamental light fixtures
   •   Marked or accented by a change in the roofline or change in the roof type
   •   If a corner building, it shall provide prominent corner entrances as noted below for retail or other activity-generating uses
Materials and Color
Buildings shall use durable, high quality materials; Natural stone, precast concrete, and factory-finished metal panels (heavy gauge only) are preferred; Plain concrete block, plywood, sheet pressboard, vinyl, and similar materials are strongly discouraged
The finish, texture, and color of materials shall be compatible with the architectural style of the building
Front yard fencing shall be low-scale and in an open-view style that is consistent with the architectural style of the building
Windows
The type, size, and location of windows shall be designed to enhance natural daylight and take advantage of natural ventilation
Windows and doors shall be recessed at least 3 inches from the face of the finished exterior wall to achieve sufficient depth and shadow; Flush finish installations, especially stucco, are not permitted
Windows shall have clear glazing (panes or sheets of glass) or lightly tinted glazing for windows not facing single-family residential; Other types of mirror glazing, including opaque glass, for windows facing single-family residential may be used
Rooftop Equipment
Rooftop mechanical equipment shall be mounted behind major rooftop elements such as stair or elevator penthouses, parapets, or architectural projection, so that the equipment is not visible from the adjacent public rights-of-way or adjacent property at grade level
 
(Ord. 6453 § 1 (part); December 18, 2018: Ord. 6506 §§ 78 - 83; February 9, 2021: Ord. 6570 §§ 44 - 47; March 19, 2024: Ord. 6609 § 47 - 54; May 13, 2025.)

18.122.070 PARKING AND LOADING.

   .010   Minimum Off-Street Parking and Loading Requirements. All parking and loading areas shall comply with Chapter 18.42 (Parking and Loading).
(Ord. 6453 § 1 (part); December 18, 2018.)

18.122.080 SIGNS.

   .010   Sign Regulations. All signs shall comply with Chapter 18.44 (Signs).
   .020   Reuse of existing motel signs is strictly prohibited. (Ord. 6453 § 1 (part); December 18, 2018.)

18.122.090 LANDSCAPING AND SCREENING.

   .010   Landscaping and screening. All landscaping and screening shall comply with Chapter 18.46 (Landscaping and Screening) with the exception of the provisions contained in this Chapter.
(Ord. 6453 § 1 (part); December 18, 2018.)

18.122.100 FENCES, WALLS AND HEDGES.

   .010 Landscaping Fences, walls, hedges and berms shall be permitted and/or required in all Development Areas, subject to the conditions and limitations set forth in subsection 18.46.110 of Chapter 18.46 (Landscaping and Screening).
(Ord. 6453 § 1 (part); December 18, 2018.)

18.122.110 REFUSE STORAGE AND RECYCLING FACILITIES.

   .010   Lots containing other than a single-family dwelling shall provide refuse storage that conforms to the document "Minimum Acceptable Trash Collection Areas" on file in the Public Works Department. The storage shall be designed, located and/or screened so as not to be readily identifiable or visible from adjacent streets, other public rights-of-way, or adjacent lots. Recycling bins shall also be provided. Trash storage areas shall not be located within required setbacks abutting lots zoned or used for single-family residential.
(Ord. 6453 § 1 (part); December 18, 2018.)