Public roadway lighting;

Lighting in the public right-of-way installed by the governmental authority having jurisdiction thereof;

Lighting required temporarily for emergency purposes or repairs in the public right-of-way, which lighting must comply with applicable state regulations;

Temporary use of low-wattage lighting for public festivals or events and the observance of holidays, provided that such use does not create disability glare that may cause a hazard for vehicle or pedestrian travel or a vehicle/pedestrian conflict;

Lighting installed by a governmental entity for the benefit of the public health, safety, and welfare.

Blinking, flashing, moving, oscillating, or changing intensity lights, including those used or proposed for signage;

Lighting that could be confused with a traffic control device;

Lighting of a type, style or intensity determined to interfere with vehicle or pedestrian traffic safety;

Strobe lights, searchlights, beacons or laser light, or similar upward or outward oriented lighting;

Exposed neon, exposed LED, or similar exposed lighting, except when used for illuminating window signs and the display area of electronic message signs;

Lighting creating a public hazard, including lighting that creates disability glare particularly where such disability glare has a detrimental effect on vehicle or pedestrian traffic;

Lights mounted on poles for the purpose of illuminating the building facade;

High-intensity floodlighting except as approved specifically for sports facility lighting;

Wallpack light fixtures that are not classified as full cutoff.

All exterior lighting fixtures not otherwise addressed by this article shall be type FL, FM, FH, BL, BM or BH as defined by the BUG (Backlight, Uplight and Glare) system of the Illumination Engineering Society of North America (IESNA).

Notwithstanding the foregoing, a lighting fixture containing a single incandescent lamp of 60 watts or less, or equivalent light output, does not require shielding when installed in the Residence Zone.

The installation of any mercury vapor fixture or lamp for use as outdoor lighting is prohibited in all zoning districts.

The installation of high-intensity illumination, including, but not limited to, high-pressure sodium, metal halide or fluorescent linear fixtures or lamps is prohibited in the Residence Zone.

Exterior lighting fixtures shall be designed and arranged not to reflect or shine light onto adjoining properties or streets, and not to distribute light skyward.

Average illumination levels generated by exterior lighting shall not exceed one footcandle for medium activity areas, such as a community shopping center, office park, or residential complex parking, and two footcandles for high activity areas, such as a fast food facility. The maximum illumination level at the property line from which light originates adjacent to a residential property shall not exceed 0.2 footcandle as measured three feet above the ground along the residential property line and within adjacent residential property.

For security and safety lighting of nonresidential property in all zoning districts, including, but not limited to, parking lots:

The total power of a lamp in a lighting fixture shall not exceed 265 watts.

All levels of illumination, luminance, and glare not limited within this article must not exceed recommended activity levels from the latest Illuminating Engineering Society of North America (IESNA) published recommended practices and handbook. Where no standard from IESNA exists, the Planning Board shall determine the appropriate level in consultation with the Village's Code Enforcement Officer, taking into account levels for the most comparable IESNA activity.

Any lighting fixture that replaces an existing nonconforming lighting fixture, or any existing nonconforming lighting fixture that is relocated, shall comply with the requirements of this article.

Any existing nonconforming lighting fixture that creates disability glare such that it creates a safety hazard shall be either shielded or redirected, upon notification to the owner or occupant.

The provisions of this article shall be administered and enforced by the Village's Code Enforcement Officer, who shall have the authority to enter upon the premises upon which exterior lighting is located or is to be located to make inspections in accordance with Article XVI below.

If the Code Enforcement Officer determines that lighting does not comply with the provisions of this article, the Code Enforcement Officer shall notify the owner of the premises on which the noncompliant lighting is located to remove, repair, or bring the lighting into compliance within 30 calendar days of the date of such notice, except in the case of unsafe lighting, in which case the owner must bring the lighting into compliance upon receipt of written notice.