Clarence City Zoning Code
SECTION 405
095 Fences.
[Ord. No. 550, 4-8-2013]
A.
Permit. A fence permit from the City of Clarence must be obtained prior to erecting a new fence or replacing an existing fence.
1.
A survey of the owner's property is suggested to ensure proper boundary lines. (The City takes no responsibility in identifying property lines.)
2.
A sit plan or drawing of the proposed location of all fences, along with the type of materials to be used. (Fences may be erected on the property line.)
B.
Fence Heights.
1.
Fences in residential areas shall not exceed eight (8) feet in height.
2.
Fences in commercial zones up to ten (10) feet will be allowed.
3.
Fences in the front yard must comply with all setback requirements. Fences shall not exceed a maximum height of forty-eight (48) inches and fifty percent (50%) maximum screening.
C.
Finished Side Facing Neighbors.
1.
All fences erected shall have the finished side facing out.
2.
Sheet metal and tin fences are prohibited.
3.
Barbed wire fences or barbed wire assemblies atop fences shall be permitted for agricultural land uses, but shall be prohibited in all other districts.
4.
Electric fences shall be permitted only for agricultural land uses.
D.
Fence Post Depth. Fence posts are required to be a minimum of two (2) feet below ground level.
E.
Advertisement. No advertising of any kind is allowed on any fence.
F.
Maintenance. It shall be the responsibility of the property owner to maintain all fences.