Grey Forest City Zoning Code
§ 12
BUILDING MATERIALS APPEARANCE AND FIRE SAFETY.
Exterior Wall Surface.
Exterior building wall surfaces for buildings greater than 144 square feet shall have the entire exterior wall surfaces covered with material such as wood, stone, masonry, stucco or materials that have the appearance of wood, stone, masonry, or stucco. This includes all new construction, remodeling, additions or accessory buildings. Cedar or any other type of wood shake/shingle siding are not allowed. Greenhouses can be constructed with transparent materials.
Roofing Surface.
Roofing surfaces on all buildings shall meet the current City adopted Fire and Building Codes. Cedar or any other type of wood shakes/shingles are not allowed.
Tarping or fabric that is primarily used on a temporary basis is not allowed on buildings except for temporary situations. Permission from the City Building Inspector or his designate is required for periods longer than a 30 days necessitating the use of tarp or other temporary cover on buildings.
Manufactured Buildings and Building Components.
Manufactured buildings and components over 144 square feet shall meet the same materials and appearance requirements of this ordinance and all applicable City ordinances and building and fire codes.
Building and Fire Codes.
The City has adopted the 2015 International Building Code, 2015 International Plumbing Code, 2014 National Electric Code (NEC), 2015 International Residential Code (IRC) with the exception of Chapter 11 and Adopting Chapter 11 of the 2009 International Residential Code (IRC), as its current set of Building Codes. The City has adopted the 2015 Edition of the International Fire Code, as its current Fire Code.
(Ordinance 45B adopted 8/22/17)