(a)

Format. The developer shall submit all plats on sheets 24 inches by 36 inches. A binding margin shall be provided of not less than 1½ inches on the left side of the sheet and margins not less than one-half inch on the other three sides. If the size of the development is such that the full area cannot be covered on a single sheet with space for titles and other required identification, the developer shall draw the plats on a number of separate sheets with matching lines to facilitate joining them together as a continuous composite plat. If more than one sheet is necessary to accommodate the entire tract proposed for development, the developer shall furnish an index map showing the entire tract. The developer shall indicate each portion of the development on the index map. If more than one sheet is so used, the developer shall submit photographic reductions of the various sheets reduced in scale and joined together to form a single overall composite of the plat on a sheet of high quality drafting film (four mils) 24 inches by 36 inches.

(b)

Certification and dedication. Forms for certification and dedication shall be placed on the plat, as appropriate, as shown in examples 14-1 through 14-5.

(Ord. No. 95-04, § 1(208), 2-20-95)