Public Facilities and Institutions Zones are established to provide public or quasi-public uses.

1. Public Facilities Zone (PF): The purpose of the PF zone is to provide areas for facilities owned by public and quasi-public entities which utilize relatively large areas of land. This zone is intended to provide immediate recognition of such areas on the official zoning map.
2. Public Institutions Zone (PI): The purpose of the PI zone is to provide areas for educational institutions, municipal uses, churches, and athletic facilities, whether publicly or privately owned, that host organized team sports. These uses utilize relatively large areas of land and are established for the health and betterment of the community at large. This zone is intended to provide immediate recognition of such areas on the official zoning map.

The provisions of this Chapter shall apply to any real property located in a PF or PI Zones as shown on the official zoning map. No building, structure or real property may be used, and no building or structure may be hereafter erected, structurally or substantially altered, or enlarged except as set forth in this Chapter. Such requirements shall not be construed to prohibit or limit other applicable provisions of this Title, this code, or other laws.

1. Schedule of Permitted Uses. The specific uses listed in the following schedule are permitted in the zones as indicated, subject to the general provisions, special conditions, additional restrictions, and exceptions set forth in this Title.
2. Procedure for Multiple Uses (Combination of Uses). If a development proposal involves a combination of uses other than accessory uses as identified in Table 19.38.030, the more restrictive provisions of this Title shall apply. For example, if a portion of a development is subject to conditional use (“C”) approval and the other portion is subject only to permitted use (“P”) review, the entire development shall be reviewed and approved by the conditional use process.
3. Abbreviations. The abbreviations used in the schedule mean:
   1. P = Permitted Use. This use is allowed in the zone but may be subject to additional restrictions and approval processes as provided in this Title.
   2. C = Conditional Use. This use is conditional because of the unique characteristics or potential impacts on the municipality, surrounding neighbors, or adjacent uses, incompatibility in some areas of the zone, or compatibility only if special provisions or conditions are required to mitigate the detrimental impacts of the use. The Planning Commission is the land use authority for uses with this designation.
   3. X = Prohibited Use. This use is prohibited in this zone. Any use not specifically identified in Table 19.38.030 is prohibited in this zone.
      

TABLE 19.38.030 - Uses Allowed in the PF and PI Zones

Any development in the PF and PI Zones shall comply with the development standards of Table 19.38.040 and all other applicable standards in this Title.

TABLE 19.38.040 Developmental Standards

^A Multiple parcels that are part of the same public facility “campus” may be combined in calculating the lot area.

^B Public or Quasi-Public Buildings may be allowed additional height at a ratio of one (1) additional foot for every five (5) feet of additional setback above the minimum from the nearest adjoining residential use. In no case may the building height exceed sixty-five feet (65’).

Any development in the PF or PI Zones shall comply with the yard and setback standards matching the adjacent zoning and all their applicable standards found in their Titles.

It is the responsibility of the applicant to comply with all other standards of Title 19 and all other municipal ordinances.