For the purposes of this article, certain phrases and words are herein defined as follows:
ALTERNATIVE TOWER STRUCTUREMan-made trees, clock towers, bell steeples, flagpoles, sculptural design and similar alternative-design mounting structures that camouflage or conceal the presence of antennas or towers.
ANCILLARY FACILITIESThe buildings, cabinets, vaults, closures and equipment required for operation of telecommunications systems, including but not limited to repeaters, equipment housing, and ventilation and other mechanical equipment.
ANTENNAAny exterior apparatus designed for telephonic, radio, or television communications through the sending and/or receiving of electromagnetic waves, digital signals, analog signals, radio frequencies (excluding radar signals), wireless telecommunications signals or other communication signals. Parabolic dish antennas used for satellite communications shall not be included within this definition.
BACKHAUL NETWORKThe lines that connect a provider's towers/cell sites to one or more cellular telephone switching offices, and/or long-distance providers, or the public switched telephone network.
BUFFER AREAThe area surrounding a telecommunications tower and ancillary facilities, which lies between the tower and adjacent lot lines and/or land uses.
CARRIERA company that provides wireless services.
CO-LOCATIONWhen two or more receiving and/or transmitting facilities are placed together in the same location or on the same antenna support structure.
FALL ZONEThe area on the ground within a prescribed radius from the base of a wireless telecommunications tower. The fall zone is the area within which there is a potential hazard from falling debris (such as ice) or collapsing material.
FUNCTIONALLY EQUIVALENT SERVICESCellular radio, personal communication service (PCS), enhanced specialized mobile radio, specialized mobile radio and paging, commercial land mobile radio and additional emerging technologies.
GUYED TOWERA tower, which is supported or braced through the use of cables (guy wires) which are permanently anchored.
HEIGHTWhen referring to a tower, the vertical distance measured from the lowest finished grade at the base of the tower to the highest point on the tower, even if said highest point is an antenna.
LATTICE TOWERA type of mount that is self-supporting with multiple legs and cross-bracing of structural steel.
MONOPOLEThe type of tower that is self-supporting with a single shaft of wood, steel or concrete and a platform (or racks) for panel antennas arrayed at the top.
PREEXISTING TOWERS AND PREEXISTING ANTENNASAny tower or antenna which has been lawfully erected prior to the effective date of this article, including permitted towers or antennas that have been approved but have not yet been constructed so long as such approval is current and not expired.
RADIO FREQUENCY RADIATION (RFR)For the purposes of this article, the emissions from personal wireless service facilities or any electromagnetic energy within the frequency range from 0.003 MHz to 300,000 MHz.
STEALTH DESIGNA telecommunications facility that is designed or located in such a way that the facility is not readily recognizable as telecommunications equipment (see "alternative tower structure").
STRUCTURE-MOUNTEDThe structure or surface upon which antennas are mounted, other than a building or on the ground.
WIRELESS TELECOMMUNICATIONS TOWERS AND FACILITIESA Federal Communications Commission (FCC) licensed facility (monopole or lattice framework) designed and used for the purpose of transmitting, receiving, and relaying voice and data signals from various wireless communication devices, including transmission towers, antennas and ancillary facilities. For purposes of this section, amateur radio transmission facilities and facilities used exclusively for the transmission of television and radio broadcasts, and noncellular telephone service are not telecommunications facilities. "Wireless telecommunications towers" shall also mean the associated facilities for the tower.