The R-1AAA and R-1AAAA Single-Family Residential Districts are established as districts in which the principal use of land is for low density residential development. Certain structures and uses, which are designed to serve governmental, educational, religious, recreational, and other immediate needs of these districts, may be allowed as conditional uses subject to requirements which provide for the protection of the single-family, low density, residential character of the respective districts.

(Amended by Res. of December 9, 2024(1))

Permitted and limited uses are established in Chapter 4B.

(Amended by Res. of December 9, 2024(1))

Conditional uses are established in Chapter 4B.

(Amended by Res. of December 9, 2024(1))

The lot and area requirements set out in this section shall be met for all construction and land uses.

[1]

Minimum lot area:

[2]

Minimum lot width at building line:

(Amended by Res. of December 9, 2024(1))

The following minimum building setback requirements shall be provided for all buildings or structures as measured from:

[1]

Arterial and collector street right-of-way lines:

[2]

Minor street right-of-way lines:

[3]

Interior lot lines:

(Amended by Res. of December 9, 2024(1))

The maximum permitted heights for buildings and structures shall be thirty-five (35) feet, except as otherwise provided in Section 4.03.

(Amended by Res. of December 9, 2024(1))

Spaces for off-street parking and provisions for loading and unloading spaces shall be provided in accordance with the provisions of Chapter 26.

(Amended by Res. of December 9, 2024(1))

Signs as allowed in these districts shall comply with the provisions of Chapter 25.

(Amended by Res. of December 9, 2024(1))

The zoning enforcement officer may reduce the minimum standards for residential properties within ECD target areas as specified in Section 23.27.07.

(Amended by Res. of December 9, 2024(1))