Zoneomics Logo
search icon

Shasta County Unincorporated
City Zoning Code

CHAPTER 17

68 - BUILDING SITE B DISTRICT

17.68.010 - Purpose.

The building site (B) district is intended to be combined with any principal district to modify the minimum lot area standard otherwise applicable in the principal district.

(Ord. 99-4 § 71, 1999: prior code § 5.02.330 (A))

17.68.020 - Permitted uses.

Uses permitted in the B district are all uses permitted in the principal district with which the B district is combined, and those uses permitted in the principal district by zoning, administrative and use permit provided the permit is issued.

(Ord. 99-4 § 72, 1999: prior code § 5.02.330 (B))

17.68.030 - Site development standards.

A.

The following minimum lot area site standards shall apply to all principal districts with which the following districts are combined:

1. B: The minimum lot area expressed in thousands of square feet, as indicated by a number following the hyphen (e.g., B-8 means eight-thousand-square-foot minimum lot area);
2. BA: The minimum lot area expressed in acres, as indicated by a number following the hyphen (e.g., BA-5 means five-acre minimum lot area;)
3. BSM: 2The minimum lot area is the area of the individual lot, as shown on a recorded parcel or final map. If no map has been recorded, the lot that was to be divided shall be subject to the regulations of the principal district, but only to the extent that the regulations do not conflict with the approved tentative map or its conditions of approval, until the map approval expires or is relinquished by the property owner. This combining district is intended to be applied only where no further land divisions are expected.

 

B.

The following building site limitations shall apply to all principal districts with which the following districts are combined:

1. BL: The number of building sites existing and allowed to be created is limited to a maximum of the number following the hyphen (e.g., BL-3 means a maximum of three building sites are allowed). This is intended to be applied to lots that qualify for more than one building site, based on allowed general plan land use densities, but are limited in the number of building sites allowed because a portion of the residential density applicable to the lot has been utilized to create other lots in the vicinity (density averaging). The minimum lot area shall be determined by the principal district;

 

C.

All other site development standards of the principal district must be met in order to qualify for the minimum lot area or number of buildings sites allowed by the B district.

(Ord. 99-4 § 73, 1999; prior code § 5.02.330 (C))