Zoneomics Logo
search icon

Baker City Zoning Code

ARTICLE 17

10 - INDUSTRIAL DISTRICT I-1

17.0.135 - Purpose and intent.

The purpose and intent of the I-1 zoning district is to provide for the heavy commercial, manufacturing and other industrial needs of the city in appropriate locations. However, activities which produce noise, smoke, dust, vibration, glare or similarly objectionable nuisances or use fissionable materials or their wastes, shall be regulated in this as well as other districts. Residential uses are expressly prohibited in this zone.

17.0.136 - Allowed uses.

Permitted and conditional uses allowed in the I-1 district are in Section 17.0.141. All conditional uses must comply with [Section] 17.0.181 Uses.

Some permitted uses shall comply with specific standards as referenced in this article. All uses shall comply with Standards of General Applicability 17.15.

17.0.140 - Specific district standards.

The following standards shall apply to development in the M-I zoning district:

Sidewalk. Continuous sidewalks shall be provided across the street fronts of property and shall connect to the existing or proposed sidewalk system. Corner and reverse frontage lots shall provide sidewalks on all sides of the property fronting a street. All new and existing structures meeting the requirements in section Pedestrian Access shall provide sidewalks including ADA standards.

Fences, setbacks. Fences shall not exceed ninety-six inches in height in the required setbacks except for street vision triangles whereby fences must comply with required street vision standards. The use of barbed wire above seventy-two inches is allowed.

Yard. Every part of a required yard shall be open to the sky, unobstructed by any structure, including the roof overhang and shall be landscaped (drought tolerant species are encouraged). No yard shall be completely paved or constructed of impervious surfaces.

Accessory Structures. Accessory structures must have outside material covering similar to that of the main unit and match the architectural style. No structure of a temporary character, tent, shack, garage or other building shall be used on any lot at any time as a residence either temporarily or permanently. All accessory structures are prohibited until the primary structure is constructed; concurrent construction for accessory and primary structures is allowed.

Except as provided in Section [17.0.182 X.] Storage Units and Containers, accessory structures shall be a minimum of ten feet from any building used for residential purposes on the same or adjoining property and shall not be located in required setbacks. When attached to the main building, the accessory building must have outside material covering similar to that of the main unit. No structure of a temporary character, tent, shack, garage or other building shall be used on any lot at any time as a residence either temporarily or permanently.

17.0.141 - Allowed uses.

Allowed Uses I-1
Permitted
All Manufacturing and Industrial Uses Not Prohibited by Law Wholesale Sales Recycling Center
Rodeo & Fairgrounds Governmental Buildings, Facilities Auto, R.V. & Marine Sales and Service
Building Materials Sales, Wholesale Public Buildings Automobile Washing
Veterinarian Clinic Laundry Facilities; Dry Cleaning Electrical Substation
Mini-warehouse storage Wireless Communication Facility Self Service/Automatic Laundry
Repair Services Small Appliances Automotive & Marine Sales and Service Agricultural/
Industrial Equipment Sales and Service
Tire Sales and Service All Permitted Uses C-2
Conditional
Acid Manufacturing Wholesale Storage or Warehousing of Acids Asphalt or Concrete Batch Plants
Cement, Lime, Gypsum or Plaster of Paris Manufacturing Fat Rendering, Fertilizer, Gas or Glue Manufacturing Manufacture of Explosives or Storage of Explosives, Including Gases
Petroleum or Petroleum Products Refining Slaughter-House Stockyards & Feedlots Smelting or Reduction of Ore or Metallurgical Products
Junk and Salvage Yards Retail Sales & Services Technical or Training Schools
All Conditional Uses C-2

 

17.0.142 - Dimensional standards.

Dimensional Standards I-1
Lot Standards
Lot Area, Minimum Square Feet 15,000
Lot Frontage, Minimum Feet 100
Minimum Setbacks (feet)
Front 0
Side 0
Residential Adjacency 25
Rear
Commercial Adjacency 10
Residential Adjacency 25
Side Corner 0
Building Standards (feet)
Building Height (Unless Limited by AAA Regulations) 70
Lot Coverage (percent)
Lot Maximum 100
Accessory Structures
Setback, Minimum Feet Side Residential Adjacency 25
Rear Residential Adjacency 25
Height ≤ Primary Structure

 

17_0_142