(a)

No building, structure, land or premises in an M-1 light industrial district shall be used, and no building or structure shall be hereafter erected, constructed, moved or altered except in compliance with one or more of the following subdistrict uses:

(1)

M-1A: Distribution centers, warehouses, packaging and shipping enters, storage buildings and motor freight depots.

(2)

M-1B: Laboratories and testing centers.

(3)

M-1C: Manufacture, processing or assembly of office equipment, leather and plastic products, toys, household appliances, paper products and mobile homes.

(b)

In addition to the uses listed above, each of the above subdistricts shall be permitted accessory uses customarily incident to the use listed.

(Ord. No. 4.414, § 1, 1-22-2018)

(a)

No use shall be permitted or operated that produces or emits noise, concussion, vibration, heat, glare, odor, noxious gas, dust or fly ash that is perceptible at the property line. All uses must comply with the Air Quality Standards and Air Pollution Control Regulations for the Kansas City Metropolitan Area as set forth by the state air conservation commission.

(b)

Any use located in district M-1 shall be completely enclosed within a building, and any open lots for storage shall be so screened that the operation shall not be visible from any point off the property, at eye level.

(Ord. No. 4.414, § 1, 1-22-2018)

In district M-1, the height of structures and the minimum dimensions of yards, except as provided in chapter 175 of this title, shall be as follows:

(1)

Height. Buildings or structures shall not exceed two stories or 40 feet in height.

(2)

Front yards. A front yard of not less than 30 feet shall be provided in this district.

(3)

Side yards. No side yard is required except where a buffer zone is required; provided that there shall be a side yard of not less than 15 feet on the street side of a corner lot.

(4)

Rear yards. A rear yard of not less than 15 feet is required.

(5)

Buffer zone. Every tract zoned M-1 which in any way adjoins, abuts, or is adjacent to a lot or tract in districts R-1—R-4 or R-P-1—R-P-4, inclusive, shall have a buffer zone, as defined herein, along the boundary line between the two districts or, if such boundary line is the center of a street, along the edge of the street right-of-way abutting the M-1 district.

(Ord. No. 4.414, § 1, 1-22-2018)