The regulations for manufacturing districts are designed to provide for the establishment of a full range of industrial and allied activities and to govern their operations in a manner that will not have a deleterious effect on residential and business areas consistent with the objectives of the comprehensive plan. It is essential that adequate provisions be made for the expansion of industry, both those existing today and for attracting a diversification of new industry. Adequate industrial sites and industrial expansion will create growth and development of the village's economic and tax base and provide a variety of employment for its labor force.

A.

Intent of M1 Manufacturing District. The M1 manufacturing district is designed to provide an environment suitable for industrial activities that require a pleasant and nuisance-free environment and will be compatible with adjacent residential and business uses.

B.

Intent of M2 Manufacturing District. The M2 manufacturing district is designed to include a special use provision for adult use.

A.

Operations Within Enclosed Buildings—M1 Manufacturing District. All activities involving the manufacturing, fabricating, processing, assembling, disassembling, repairing, cleaning, servicing, testing, and storing of materials, products, and goods shall be conducted within completely enclosed buildings.

B.

Performance Standards. Performance standards for noise, vibration, smoke, and particulate matter, toxic matter, odorous matter, fire and explosion hazards, heat, glare and radiation hazards shall be the same as those established by the Illinois Environmental Protection Agency.

Table 17.16.030.1: Business Districts Permitted and Special Uses lists permitted and special uses for the business districts. A "P" indicates that a use is considered permitted within a given district. An "S" indicates that a use is considered a special use within a given district and a special use permit must be obtained as required in Section 17.56.210 (Special use permits). No letter (i.e., a blank space), or the absence of the use from the table, indicates that use is not permitted or specially permitted within a given district. Any use that is not identified in this table as a permitted or a specially permitted use is prohibited.

Footnotes:

¹

The terms in this column ("Use") are defined in Section 17.04.050 (Rules—Definitions).

²

Any business use similar to a permitted use listed in this table shall be considered a special use.

³

Including fabricating, processing, assembling, disassembling, repairing, cleaning, servicing, testing, and storing of materials, products and goods; provided operations conform with the performance standards and other general requirements applicable to an M1 district or M2 district.

⁴

Dwelling units for watchmen and operating personnel and their families when the nature of operations require such personnel to reside on the premises where they are employed.

⁵

Including offices, storing, testing, repairing and servicing.

⁶

Including shelters, passenger stations, parking areas and service buildings.

⁷

In addition to reviewing and evaluating the characteristics of and criteria for a proposed special use as set forth in Section 17.56.210 and evaluating the proposed special use for satisfaction of the approval criteria set forth therein, this use shall be subject to the additional regulations set forth in Chapter 17.50 of the Village Code.

(Ord. No. 20-01, § 5, 1-2-20)

Table 17.20.040.1: Manufacturing Districts Bulk and Yard Requirements establishes building bulk and yard setback requirements for the manufacturing districts. These regulations apply to all uses within a given district unless otherwise stated.

Footnotes:

¹

When adjacent to a residential front yard, the requirement of the adjoining district shall apply in full; if there is an intervening alley, fifty (50) percent of the requirement shall apply.

²

If a side yard is provided, it shall not be less than five feet in depth, and when adjacent to a residential side yard, the requirement of the adjoining district shall apply in full; if there is an intervening alley, fifty (50) percent of the requirement shall apply.

A.

Temporary Uses. See Section 17.56.130 (Temporary use permits) for standards governing temporary uses.

B.

Garages and Other Accessory Buildings, Structures, and Uses. See Section 17.04.120 (Garages and other accessory buildings, structures, and uses) for standards covering accessory buildings, structures and uses.

C.

Allowable Encroachments. See Section 17.04.130 (Control of structural and use encroachments in yards) for standards governing encroachments.

D.

Off-Street Parking and Loading. See Chapter 17.28 (Off-Street Parking and Loading) for standards governing off-street parking and loading.

E.

Signs. See Chapter 17.36 (Signs) for standards governing signs.