The home shall be a double wide or larger multisection unit;

The home shall be placed on an excavated and back-filled foundation and enclosed at the perimeter with concrete block or a permanent poured material, such that the bottom plate line of the manufactured home is located not more than 12 inches above grade (ground level). Where the building site has a sloped grade, the height of the bottom plate shall be measured on the uphill side of the home;

The home shall have a pitched roof with a nominal slope of at least three feet in height for each 12 feet in width;

The home shall have exterior siding and roofing which in color, material and appearance is comparable or complementary to the predominant materials used on surrounding dwellings as determined by the Director and shall not have reflective metal siding or roofing;

The home shall be certified by the manufacturer to have an exterior thermal envelope meeting performance standards, which reduces heat loss to levels equivalent to the performance standards required of single-family dwellings constructed under the State Building Code as defined in ORS Chapter 455;

Evidence demonstrating that the manufactured home meets "Super Good Cents" (ceiling R-38, walls R-19, floors R-33 (requires two by six walls)) energy efficiency standards which are deemed to satisfy the exterior thermal envelope certification requirement;

The manufactured home shall be situated on the space with a door facing toward the primary street servicing the home. A paved pedestrian connection shall be provided from the sidewalk or public right-of-way to such door facing the street;

The manufactured home shall be situated on the space with a door facing toward the primary street servicing the home. A paved pedestrian connection shall be provided from the sidewalk or public right-of-way to such door facing the street.