The Heavy Manufacturing and Industrial Zone-2, hereinafter referred to as M-2 zone is designed to provide for a variety of unique general industrial activities which are not allowed in the M-1 zone.

Development standards for the M-2 zone shall be as follows:

1. Location: This zone shall be located on, or easily accessible to state highways and designated primary county roads, i.e. collector and arterial roads as specified on the current official county road map, as amended from time to time.
2. Uses:
   1. Permitted uses:
      1. All M-1 uses shall be allowed in the M-2 zone;
      2. Bulk storage and/or sale of gasoline, propane or similar petroleum products;
      3. Junkyards or areas for the storage of inoperable automobiles;
      4. Billboards or other types of outdoor advertising devices;
      5. Airports, helicopter pads and other types of aircraft landing areas;
      6. Food product processing;
      7. Fruit and vegetable packing;
      8. Concrete or asphalt batch plants, sand and gravel plants, rock crushing or stamp mills or similar uses which generate dust and noise and are conducted principally outside of a building or enclosed structure;
      9. Smelting; blast, cupola or metal furnace, coke ovens;
      10. Dehydrators;
      11. Distillation of bone, dog or cat food factory, fat rendering fish cannery, garbage, abattoir, dead animal disposal or reduction;
      12. Incineration, reduction or dumping of offal, garbage or refuse disposal (except solid waste collection sites);
      13. Refining of petroleum products;
      14. Rolling mill;
      15. Salt works;
      16. Sand blasting (when conducted outside a building or structure);
      17. Soap works;
      18. Tanning or wood distillation;
      19. Manufacture of acetylene gas, ammonia, asbestos, asphalt or explosive.
   2. Accessory uses: Research and development facilities and all accessory uses listed in CG-1, section 17.88.020(B)(2).
   3. Conditional uses: None.
   4. Prohibited uses: All uses listed in section 17.108.200 of this title and other uses not listed above are prohibited.
3. Minimum parcel or lot sizes: No parcel of real property shall be divided or split into two (2) or more parcels or lots by voluntary transfer, court action or other conveyance where any one (1) of the parcels or lots so created will be less than forty (40) acres or a legal quarter-quarter section in gross area. In no case shall any individual sub-parcel within the park, either for an individual's private use, or as a common ownership area, be less than one (1) acre in area.
4. Density: One (1) single family residence per forty (40) acres or a legal quarter-quarter section in gross area. The density contained herein shall remain unchanged regardless of whether or not the park is subdivided in sub-parcels as permitted by this title.

The setback standards and parking or development within the setbacks for the M-2 zone shall be as specified for the CG-1 zone listed in section 17.88.030 of this title.

The design criteria for the M-2 zone shall be as specified for the CG-1 zone listed in section 17.88.040 of this title.

Project phasing in the M-2 zone shall be as specified for the CG-1 zone listed in section 17.88.050 of this title.

Procedures for establishing an M-2 zone shall be as specified for the CG-1 zone listed in section 17.88.060 of this title.

Granting of permits for an M-2 zone shall be as specified for the CG-1 zone listed in section 17.88.070 of this title.