A.   In the restricted industrial district II, no building or premises shall be used and no building shall hereafter be erected, converted in use, enlarged, moved or structurally altered unless otherwise provided in this title, except for one or more of the following uses:

Airports.

Commercial activities that exclusively serve only the primary uses permitted in this district.

Contractor's storage yard.

Enameling and painting shops, provided that all painting, cleaning and related operations shall be conducted within a building.

Food locker plants.

Laboratories.

Machine shops and sheet metal products manufacture, provided that no stamp or punch presses exceeding twenty (20) tons' capacity, or forge or drop hammers shall be located within two hundred feet (200') of the boundary of any residential district.

Manufacture and assembly of home and office appliances and supplies, sporting goods and supplies.

Manufacture and bottling of nonalcoholic beverages.

Manufacture of electrical and electronic appliances and devices.

Manufacture of jewelry, toys and novelties.

Manufacture of products from textiles, furs, glass, leather, plaster, paper, plastics and wood, not including planing mills or the manufacture of paper, pulp, plastics or leather or the tanning of hides.

Motor freight terminals and vehicle repair facilities.

Processing, packing and manufacture of confections, cosmetics, food and pharmaceuticals, except meat and meat products, fish and fish products, sauerkraut and cabbage byproducts and the vining of peas.

Storage or warehousing of materials or products, provided that all such storage or warehousing shall be within a fully enclosed building or inside a screening wall forming a complete opaque screen as set forth at subsection 10-15-6B of this chapter.

Use customarily incidental to the foregoing uses and accessory buildings and structures. (1975 Code Ch. 18 § XXI; amd. Ord. 2009-01, 2-16-2009)

   B.   The following uses are strictly prohibited whether or not they are located in a fully enclosed building:

Ammunition manufacture, storage or warehousing.

Automobile wrecking yard.

Explosives manufacture, storage or warehousing.

Fireworks manufacture, storage or warehousing.

Inflammable gases or liquids manufacture, storage or warehousing (except in conjunction with the operation of an airport).

Junkyard. (Ord. 2009-01, 2-16-2009)

In the I-2 restricted industrial district II, the height of buildings and the minimum dimensions of yards for all buildings hereafter erected, converted in use, enlarged, moved or structurally altered unless otherwise provided in this title shall be as follows:

   A.   Height: No building shall exceed forty five feet (45') or three (3) stories in height. Same as provided in section 10-4-4 of this title.

   B.   Side Yard: No side yard shall be less than twenty five feet (25'). Same as provided in section 10-4-5 of this title.

   C.   Setback: There shall be a setback of not less than fifty feet (50').

   D.   Rear Yard: There shall be a rear yard having a minimum depth of twenty five feet (25'). Loading platforms may be established in such rear yard where it abuts on a railroad. Same as provided in section 10-4-5 of this title. (1975 Code Ch. 18 § XXI)

   A.   Required: Same as provided in section 10-4-7 of this title.

   B.   Front Yard: Parking in the front yard shall be limited to visitor parking. (1975 Code Ch. 18 § XXI)

Signs on buildings shall not project above the highest point on the building and shall not extend more than two feet (2') from the face of the building. (1975 Code Ch. 18 § XXI)

Loading docks shall be set back a minimum of one hundred feet (100') from the street line if located on the front of the building. Loading docks in the rear or on the side of the building not facing streets shall conform to the rear yard and side yard requirements. (1975 Code Ch. 18 § XXI)

   A.   No materials, supplies or equipment, including any trucks owned or operated by the property occupant, shall be stored or parked in any area on the property except inside a building, or behind a visual barrier screen or building so that it is not visible from the street. (1975 Code Ch. 18 § XXI)

   B.   Screening walls shall form a complete opaque screen and shall be a minimum height of six feet (6') or the height of the materials or products being screened, whichever is higher. The materials used for the screening wall may be an earthen berm and/or plants and/or solid fencing. No woven metal or chainlink fence shall be used for such screening. (Ord. 2009-01, 2-16-2009)