Northville Charter Township
City Zoning Code
City Zoning Code
ARTICLE 31
Fences
§ 170-31.1 General standards applying to all fences.
A.
Fences with a height of 36 inches or less do not require a permit, provided the fence is used as a decorative landscape feature and the fence complies with the following standards:
B.
Fences with a height greater than 36 inches and up to seven feet require a zoning compliance permit.
C.
Fences with a height greater than seven feet require a building permit.
D.
The finished side of the fence shall abut the adjacent lot, road right-of-way or easement.
E.
Unless otherwise specified in this chapter, fences shall not contain barbed wire, electric current or charges of electricity.
F.
The issuance of a fence permit is not intended, nor should it be construed, to abolish or modify the applicant's duties as contained in covenants and restrictions arising from a deed or other document. The Township does not have the authority to enforce private covenants or deed restrictions.
G.
Chain-link fences are not permitted, except in the Consumer Industrial Zoning District and provided the chain-link fence is vinyl coated with black or dark green color.
H.
Except as permitted in residential zoning districts, privacy screens are not permitted.
§ 170-31.2 Swimming pools, spas, hot tubs and other similar facilities.
§ 170-31.3 Parks, schools, playgrounds or other public areas.
A.
Fences are not permitted within the required front yard setback.
B.
Height shall not exceed four feet in residential zoning districts.
C.
Height shall not exceed five feet in nonresidential zoning districts.
D.
Vision shall not be obstructed by more than 25% when viewed perpendicular to the plane of the fence. The open areas shall be evenly distributed over the total area of the fence.
E.
Backstops for ball fields are exempt for these standards.
§ 170-31.4 Utilities, communications and other similar facilities.
§ 170-31.5 Fences in residential zoning districts.
A.
Fences located on lots greater than two acres shall comply with the following:
(1)
Fences abutting a road:
(a)
Height shall not exceed four feet. Decorative projections are permitted along the top of the fence, provided the total height of the projections and the fence do not exceed 54 inches.
(b)
Vision shall not be obstructed by more than 25% when viewed perpendicular to the plane of the fence. The open areas shall be evenly distributed over the total area of the fence.
(c)
Fences are not permitted within the required front yard setback.
B.
Fences on lots two acres or less shall comply with the following:
(1)
Fences located in the front yard:
(a)
Height shall not exceed 36 inches.
(b)
Sections shall not exceed 20 feet in length.
(c)
Sections shall not be closer than 10 feet to each other.
(d)
The total length of all sections shall not exceed 100 feet.
(e)
Vision shall not be obstructed by more than 50% when viewed perpendicular to the plane of the fence. The open areas shall be evenly distributed over the total area of the fence.
(2)
Fences located in a side or rear yard:
(a)
Height shall not exceed four feet. Decorative projections are permitted along the top of the fence, provided the total height of the projections and the fence do not exceed 54 inches.
(b)
Vision shall not be obstructed by more than 50% when viewed perpendicular to the plane of the fence. The open areas shall be evenly distributed over the total area of the fence.
C.
Privacy screens shall comply with the following:
(1)
Length shall not extend more than 16 feet beyond the rear building line.
(2)
Shall not be located within the required side yard.
(3)
Shall be limited to two sides of the area it is screening.
(4)
Height shall not exceed five feet, as measured from the bottom of the privacy screen.
(5)
Vison shall not be obstructed by more than 75% when viewed from a particular plane of the fence. The open areas shall be evenly distributed over the total area of the fence.
§ 170-31.6 Fences in nonresidential zoning districts.
A.
Vision shall not be obstructed by more than 25% when viewed perpendicular to the plane of the fence. The open areas shall be evenly distributed over the total area of the fence.
B.
In the Industrial and ORT Zoning Districts, fences must comply with the following standards:
(1)
Height shall not exceed six feet.
(2)
Landscape shall be provided to minimize the appearance of the fence.
(3)
Shall not be located within the required side or rear yard setback.
(4)
Shall not extend beyond the front building line.
(5)
The extent of the fence shall be the minimum necessary to support the on-site business operations.
C.
In the CI Zoning District, fences must comply with the following standards:
(1)
Height shall not exceed six feet.
(2)
Fences may be located on the property line, unless a setback is needed to provide required landscape screening.
(3)
Shall not extend beyond the front building line.
(4)
Chain-link fences are permitted, provided they are vinyl coated with black or dark green color.
D.
In all other nonresidential zoning districts, fence height shall not exceed four feet.
§ 170-31.7 Enforcement.
The Building Official, or his designee, is authorized to serve a notice of violation or order on the person responsible for the erection, construction, alteration, extension, repair or moving of a fence in violation of the provisions of this chapter. Such order shall direct the discontinuance of the illegal action or condition and the abatement of the violation.