- Light Industrial Zone M-1
(a)
In the Light Industrial (M-1) Zone, only commercial and industrial activities and uses which are included in the following use groups shall be permitted without conditional approval:
(b)
In the M-1 Zone, commercial and industrial activities and uses which are included in the following use groups shall be permitted only with conditional approval:
(Ord. 1050 § 4, 2003; prior code § 10-2.2001)
The I-205 overlay zone applies to portions of this M-1 zone. (See section 10.08.2861.)
(Ord. No. 1226, § 1(Exh. B), 10-18-2016)
A screening fence six (6') feet in height, measured from the finished grade of the M-1 Zone property line, separating the M-1 Zone property from adjoining residential zones, shall be required.
(Prior code § 10-2.2002)
There shall be no site area requirements in the M-1 Zone.
(Prior code § 10-2.2003)
There shall be no lot area requirements in the M-1 Zone.
(Prior code § 10-2.2004)
Minimum yards in the M-1 Zone shall be as follows:
(a)
Front yards. Twenty-five (25') feet;
(b)
Side yards. No requirements, except where adjoining a residential zone, in which case a side yard of fifteen (15') feet shall be required; and
(c)
Rear yards. No requirements.
(Prior code § 10-2.2005) 10.08.2670
There shall be no height requirements in the M-1 Zone.
(Prior code § 10-2.2006)
There shall be no lot coverage requirements in the M-1 Zone.
(Prior code § 10-2.2007)
No requirements.
(Prior code § 10-2.2008)
(See Article 26 of this chapter.)
(Prior code § 10-2.2009)
No requirements.
(Prior code § 10-2.2010)
(M-1).
On-site loading and unloading space shall be provided.
(Prior code § 10-2.2011)
All uses requiring a building permit shall obtain development review compliance, except as provided for in Article 30 of this chapter and the CEQA Guidelines adopted by the City, prior to king established in the M-1 Zone.
(Prior code § 10-2.2012)
- Light Industrial Zone M-1
(a)
In the Light Industrial (M-1) Zone, only commercial and industrial activities and uses which are included in the following use groups shall be permitted without conditional approval:
(b)
In the M-1 Zone, commercial and industrial activities and uses which are included in the following use groups shall be permitted only with conditional approval:
(Ord. 1050 § 4, 2003; prior code § 10-2.2001)
The I-205 overlay zone applies to portions of this M-1 zone. (See section 10.08.2861.)
(Ord. No. 1226, § 1(Exh. B), 10-18-2016)
A screening fence six (6') feet in height, measured from the finished grade of the M-1 Zone property line, separating the M-1 Zone property from adjoining residential zones, shall be required.
(Prior code § 10-2.2002)
There shall be no site area requirements in the M-1 Zone.
(Prior code § 10-2.2003)
There shall be no lot area requirements in the M-1 Zone.
(Prior code § 10-2.2004)
Minimum yards in the M-1 Zone shall be as follows:
(a)
Front yards. Twenty-five (25') feet;
(b)
Side yards. No requirements, except where adjoining a residential zone, in which case a side yard of fifteen (15') feet shall be required; and
(c)
Rear yards. No requirements.
(Prior code § 10-2.2005) 10.08.2670
There shall be no height requirements in the M-1 Zone.
(Prior code § 10-2.2006)
There shall be no lot coverage requirements in the M-1 Zone.
(Prior code § 10-2.2007)
No requirements.
(Prior code § 10-2.2008)
(See Article 26 of this chapter.)
(Prior code § 10-2.2009)
No requirements.
(Prior code § 10-2.2010)
(M-1).
On-site loading and unloading space shall be provided.
(Prior code § 10-2.2011)
All uses requiring a building permit shall obtain development review compliance, except as provided for in Article 30 of this chapter and the CEQA Guidelines adopted by the City, prior to king established in the M-1 Zone.
(Prior code § 10-2.2012)