- "I" Industrial District.
The following regulations shall apply to the "I" Industrial District:
A.
Use regulations: Any building or premises may be used for any purpose not in conflict with any ordinance of the City of Bellmead, Texas, provided that no building or occupancy permit shall be issued for any of the following uses until and unless the location of such use shall have been approved by the Council following a recommendation by the Planning Commission:
1.
Cement or lime manufacture.
2.
Distillation of bones.
3.
Explosives manufacture or storage.
4.
Fat rendering.
5.
Garbage, offal or dead animal incineration, reduction, or dumping.
6.
Junk yards or automobile wrecking yards.
7.
Petroleum refinery.
8.
Slaughter and dressing of animals (not including poultry and rabbits).
9.
Stockyards.
10.
Storage warehouse, facility, and/or depot.
11.
Wholesale storage of gasoline or other petroleum products in carload lots or more above ground.
B.
Height regulations: No building shall exceed a height of six (6) stories or seventy-five (75) feet.
C.
Yard regulations:
1.
Front yard. For uses permitted in the "R-2" District, the front yard requirement for the "B-2" District shall apply. For other uses there is no front yard requirement.
2.
Side yard[s]. For uses permitted in the "R-2" District, the side yard requirements for the "R-2" District shall apply. For other uses, there are no side yards required.
3.
Rear yard. For uses permitted in the "R-2" District, the rear yard requirement for the "R-2" District shall apply. For other uses, there is no rear yard requirement.
D.
Intensity of use: For uses permitted in the "R-2" District, the minimum lot area and minimum lot width shall be the same as in the "R-2" District. There are no minimum lot area or lot width requirements for other uses.
E.
Parking regulations: The parking regulations for dwellings are the same as those in the "R-2" District.
F.
Additional use, height, and area regulations: Additional use, height and area regulations and exceptions are located in Section XI herein.
(Ord. No. 2021-21, § 1, 9-14-2021)
- "I" Industrial District.
The following regulations shall apply to the "I" Industrial District:
A.
Use regulations: Any building or premises may be used for any purpose not in conflict with any ordinance of the City of Bellmead, Texas, provided that no building or occupancy permit shall be issued for any of the following uses until and unless the location of such use shall have been approved by the Council following a recommendation by the Planning Commission:
1.
Cement or lime manufacture.
2.
Distillation of bones.
3.
Explosives manufacture or storage.
4.
Fat rendering.
5.
Garbage, offal or dead animal incineration, reduction, or dumping.
6.
Junk yards or automobile wrecking yards.
7.
Petroleum refinery.
8.
Slaughter and dressing of animals (not including poultry and rabbits).
9.
Stockyards.
10.
Storage warehouse, facility, and/or depot.
11.
Wholesale storage of gasoline or other petroleum products in carload lots or more above ground.
B.
Height regulations: No building shall exceed a height of six (6) stories or seventy-five (75) feet.
C.
Yard regulations:
1.
Front yard. For uses permitted in the "R-2" District, the front yard requirement for the "B-2" District shall apply. For other uses there is no front yard requirement.
2.
Side yard[s]. For uses permitted in the "R-2" District, the side yard requirements for the "R-2" District shall apply. For other uses, there are no side yards required.
3.
Rear yard. For uses permitted in the "R-2" District, the rear yard requirement for the "R-2" District shall apply. For other uses, there is no rear yard requirement.
D.
Intensity of use: For uses permitted in the "R-2" District, the minimum lot area and minimum lot width shall be the same as in the "R-2" District. There are no minimum lot area or lot width requirements for other uses.
E.
Parking regulations: The parking regulations for dwellings are the same as those in the "R-2" District.
F.
Additional use, height, and area regulations: Additional use, height and area regulations and exceptions are located in Section XI herein.
(Ord. No. 2021-21, § 1, 9-14-2021)