Commercial:

Manufacturing:

Processing:

Fabrication:

Wholesaling and Warehousing: Wholesaling, warehousing and storage facilities;

Storage Yard:

Utilities: Electric distribution and public utility substations, electric and public utility transmission substations, public and private utility service yards;

Residential: Residential uses required for plant security personnel only;

Other:

Animal hospital, shelter, kennel and boarding;

Automobile repair services (major), subject to CMC § 17.04.073 (Definitions and Standards);

Automobile service stations, subject to the provisions of CMC § 17.64.100 through 17.64.160; the provisions of CMC § 17.54.120, 17.54.130(A) through (E), and 17.54.140 shall not apply to automobile service stations;

Automobile towing and impound;

Conversion of residential buildings to nonresidential uses subject to CMC § 17.76.010 through 17.76.040;

Distribution centers, subject to CMC § 17.04.195.5 (Definitions and Standards);

Electrical or mechanical games as ancillary use; more than three;

Existing residential trailer parks and such incidental uses directly related to the needs of the trailer park residents as listed in CMC § 17.30.020(B);

Gymnastic school and vocational and rehabilitation schools as related to the zone;

Indoor recreation facilities, subject to provision of CMC § 17.04.322.5;

Liquor, on-sale:

Mechanical car wash;

Mobile food facilities:

Off-street parking facilities for nonindustrial uses;

The following uses, whether separate or incidental to a permitted industrial use:

Public storage facilities, subject to CMC § 17.62.020(C);

Recycling collection facilities subject to the provisions of CMC § 17.62.195;

Recycling processing facilities subject to the provisions of CMC § 17.62.195;

Storage and dispensing of liquefied petroleum gas in anticipation of retail sale;

Baseball and softball schools;

Adult-oriented businesses;

On-site wine tasting in conjunction with a winery, as defined by the State Department of Alcoholic Beverage Control (ABC) as a business having only a Type 02 license (winegrower/winery), as opposed to any other ABC license classification;

On-site beer tasting in conjunction with a small brewery, as defined by the State Department of Alcoholic Beverage Control (ABC) as a business having only a Type 23 license (small beer manufacturer), as opposed to any other ABC license classification;

Notwithstanding any provision in subsections (V) and (W) of this section to the contrary, the same site may operate both a winery with on-site wine tasting and a small brewery with on-site beer tasting, provided a conditional use permit has been obtained to operate both;

Cannabis microbusinesses that comply with the requirements set forth in Chapter 17.84 CMC.

Residential uses other than those permitted in CMC § 17.54.020(H);

Manufacturing plants manufacturing the following products:

Adult-Oriented Businesses:

Processing:

Commercial uses and sales limited to retail sale operations only, except as permitted in CMC § 17.54.020(A);

Storage of flammable liquids in outside ground level or aboveground level storage facilities.

There are no lot width provisions;

Each lot shall have a minimum depth of 150 feet.

Walls and fences with a minimum height of six feet and up to a maximum height of eight feet shall be provided along interior side and rear property lines.

Walls shall be reduced to not more than three feet in height in any required front yard landscaped area abutting a street except as otherwise provided herein, and shall comply with the corner cutback provisions in CMC § 17.54.190.

Walls placed within any required front yard or street side yard areas must meet the required landscaped areas in CMC § 17.54.120, Table 17.54.120, including the footnotes of additional requirements.

Where no building exists on a yard setback line established in CMC § 17.54.120 a masonry wall with a minimum height of six feet and up to a maximum height of eight feet may be required, unless otherwise provided herein, at the time of site plan review, to separate the M-1 zone from adjacent residential zones.

Walls along property lines or screen walls for loading and outdoor storage areas shall have decorative materials such as concrete panels or split-face blocks with cap or similar features that are architecturally integrated with the design of the buildings. Fence materials along property lines and not used for screening the loading and outdoor storage areas may use wrought iron, tubular steel, or similar materials. Barbed wire or razor wire on top of fence or wall is prohibited. Chain link fencing is not allowed, except for temporary construction.

All loading areas, loading doors, and storage areas shall be screened from view of the public street by a decorative screen wall in combination with dense landscaping inclusive of trees, shrubs and landscaped berm.

The minimum screen wall height for loading and storage areas shall be 10 feet; however, in no case the maximum wall height exposed to the view of a public street shall be more than eight feet. Landscaped berm or planter may be used to minimize the perceived height of the screen wall.

Within the screened outdoor storage area, the items stored shall not be stacked or piled higher than the height of the screen wall. The storage area must maintain a six-foot unobstructed area between the storage area and the screened wall along any side or rear property line.

There shall be a corner cutback area at all intersections and intercepting streets. The cutback area shall be defined by a horizontal line drawn from a point on the front, side or rear property line, the point being not less than 25 feet measured from the intersection of the front, side or rear property lines, or the prolongation of such property lines, to a point similarly located on the intersecting property lines;

There shall be a corner cutback area on each side of any private driveway and/or alleys intersecting a street or alley. The cutback line shall be in a horizontal plane, making an angle of 45 degrees with the side, front or rear property line as the case may be. They shall pass through a point not less than 10 feet from the edges of the driveway or the alley where it intersects the street or alley right-of-way.

Fences, hedges, walls and retaining walls with a minimum height of six feet and up to a maximum height of eight feet shall be permitted to the lot interior of all required yard setback lines.

Fences, hedges, walls and retaining walls not more than three feet in height shall be permitted within required landscaped yards.

There shall be vehicular access from a dedicated street or alley to off-street parking and loading facilities on the property requiring the parking and loading.

The location and number of ingress and egress points shall be specified at the time of site plan review.

Identification signs indicating the name and nature of the occupancy and/or the name and address of the building and/or the name and address of the owner;

Directional signs related to the location of buildings and facilities on the premises, provided they are located on the subject property;

Nameplates;

Monument signs;

Each building shall be allowed one monument sign displaying either the name and/or address of the business (if only one occupancy) or the address of the building (if more than one occupancy). The occupant may have an identification sign mounted flat against the building wall instead of a monument sign. This sign shall have an aggregate sign area not in excess of 15 percent of the area of the first story of the building. The monument sign shall be located in a landscaped area and shall not exceed a height of six feet and shall have a maximum sign face area of 20 square feet per side.

If a building has more than one occupant and the allowed monument sign is utilized to display the building address only, each occupant shall be allowed one identification sign. This combination sign shall be mounted flat against the building wall and shall have an aggregate sign area not in excess of 15 percent of the area of the first story height of the building.

Each building shall be allowed one pedestrian-oriented identification sign for each public entrance. This sign shall be mounted flat against the building wall or suspended from an overhanging feature which is an integral part of the building and shall have an aggregate sign area not to exceed three square feet.

Each building shall be allowed sufficient directional signs, as determined by the planning department, for identifying parking areas, service entrances, loading docks, etc.

Each building complex shall be allowed one monument sign, displaying the name and/or address of the business (if only one occupant) or the names and/or addresses of the several occupants within the complex, or one freestanding sign under the same aforementioned conditions. Neither the monument sign nor the freestanding sign shall be on the same side of the street nor within the required corner cutback. The monument sign shall be located within a landscaped area, shall have a height not in excess of 15 feet, and shall have a sign face area not to exceed 50 square feet per side. The freestanding sign shall be located in a landscaped area and shall have a height not to exceed 18 feet and shall have a sign face not to exceed 50 square feet per side. The occupant may have an identification sign mounted flat against the building wall instead of a monument sign or a freestanding sign. This sign shall have an aggregate sign area not in excess of 15 percent of the area of the first story of the building.

If a building complex has more than one occupant, each occupant shall be allowed one identification sign. This sign shall be mounted flat against the building wall and shall have an aggregate sign area not in excess of 15 percent of the area of the first story height of the building.

Each building, if only one occupant is present, shall be allowed one pedestrian-oriented identification sign for each public entrance. This sign shall be mounted flat against the building wall or suspended from an overhanging feature which is an integral part of the building and shall have an aggregate sign area not to exceed three square feet.

Each building complex shall be allowed sufficient directional signs, as determined by the planning department, for identifying parking areas, service entrances, loading docks, etc.

When a building rears onto a public alley or parking lot with a public entrance serving those areas and the building already has its allowable identification signs, an additional sign may be erected at that entrance. The area devoted to such sign shall not exceed 10 percent of the rear face of the building to the first story height, and such sign must be mounted flat against the building wall.