All paved parking surfaces shall be constructed in accordance with the city's technical specifications and in accordance with the following standards.

(1)

With respect to parking stalls:

a.

Each striped stall shall be a minimum of nine (9) feet wide by eighteen (18) feet long;

b.

If the end of a stall abuts a landscaped area or a paved walkway a minimum of six (6) feet wide the length of the stall may be reduced to sixteen (16) feet long; and

c.

Parallel parking spaces shall be nine (9) feet wide and twenty-three (23) feet long.

(2)

With respect to drive aisles:

a.

A single-loaded drive aisle shall be a minimum twenty (20) feet wide; and

b.

A double-loaded drive aisle shall be a minimum twenty-four (24) feet wide.

(3)

With respect to drive approaches, for paved areas only:

a.

The turning radius shall be a minimum fifteen (15) feet and a maximum fifty (50) feet;

b.

For all commercial, industrial, and multi-family drive approaches, the width shall be:

(i)

For a one-way approach, a minimum fifteen (15) feet wide and a maximum twenty (20) feet wide;

(ii)

For a two-way approach, a minimum twenty-four (24) feet wide and a maximum thirty-six (36) feet wide; and

(iii)

Additional lanes shall be allowed on a case-by-case basis.

(Ord. No. 8804, § I, 4-11-05)