Zoneomics Logo
search icon

Mapleton City Zoning Code

CHAPTER 18

26 LOTS, YARDS, AND OPEN SPACES; BUILDING HEIGHT AND SIZE

18.26.010: REQUIREMENTS DESIGNATED:

Requirements and regulations pertaining to area on width of lots, size of yards, and open spaces, percentage of lot that may be occupied, and the height and size of buildings shall be as set forth in the applicable chapter for that particular zone. (Ord. 2013-03, 1-15-2013, eff. 2-7-2013)

18.26.020: EXCEPTION TO SIDE AND REAR SETBACK REQUIREMENTS FOR ACCESSORY STRUCTURES IN RESIDENTIAL ZONES:

Accessory buildings on residential lots shall comply with the front yard and side yard; corner lot setback requirements, and the building height requirements for the zone in which the building is located. Accessory buildings shall be set back at least ten feet (10') from the side and rear property lines, unless the rear yard faces a public street, in which case the setback shall be the same as the required front yard setback. An accessory building may be located no closer than three feet (3') from the side and/or rear property lines if the following conditions are met:
   A.   The building shall be less than fifteen feet (15') tall;
   B.   All roof drainage shall be directed away from any adjacent property lines and shall be drained to the property wherein the building is located;
   C.   The side and/or rear property line is not facing a public street; and
   D.   The building will not be placed over any land designated as a utility easement upon which any underground utility line or system shall have been constructed. (Ord. 2014-02, 1-7-2014, eff. 2-2-2014)

18.26.030: CRITERIA FOR DETERMINING COMPLIANCE WITH MINIMUM LOT WIDTH REQUIREMENTS; LOTS TO ABUT UPON CITY STREET:

   A.   For purposes of determining compliance with the lot width (frontage) requirements, measurement of the lot width shall be measured at a distance of thirty feet (30') from the property line or street right of way line on a line perpendicular to a line drawn from the center of a cul-de-sac, knuckle, or curvilinear street to the midpoint of the arc, which length is determined by the lot lines.
   B.   In addition to compliance with the minimum lot width requirement as set forth in the above subsection, each lot shall abut directly upon a designated city street. The distance of said abutting side shall be:
      1.   Not less than the minimum width requirement of the zone, except that the length of said abutting side may be reduced to not less than fifty feet (50') where: a) the lot fronts upon a cul-de-sac, knuckle or curve in the street, and b) the side lot lines radiate in such a manner that the minimum lot width requirements are met at the front setback line 1 .
      2.   Such other length as is specifically required under the terms of this chapter, whichever is greater (i.e., CE-1 zone; see subsection 18.30.040C of this title). (Ord. 2004-13, 6-16-2004, eff. 7-13-2004)

18.26.040: CONFLICTING PROVISIONS:

Where specific requirements are made, or exemptions allowed under individual sections of the code, those requirements or exemptions shall prevail over the requirements of this section. However, any stricter code requirement (not exemption) shall also apply. (Ord. 2004-13, 6-16-2004, eff. 7-13-2004)