Zoneomics Logo
search icon

Newton City Zoning Code

§ 320-12 Special District 2

College Zone.

320 SD2 Zone Map.tif
A. 
SD-2 purpose. Special District 2: College Zone covers the Sussex County Community College Campus. The following building types are permitted in the District:
(1) 
Civic institutional;
(2) 
Historic institutional;
(3) 
Offices;
(4) 
Multifamily residential;
(5) 
Elevator flats;
(6) 
Parking garage; and
(7) 
Parking garage with liner building.
320 SD2 Photo.tif
B. 
SD-2 bulk requirements.
Building Configuration
Principal building
4 stories/50 feet maximum
Accessory building
2 stories/25 feet maximum
Lot Occupation
Lot width
50 feet minimum
Lot coverage
60% maximum
Building Disposition
Edgeyard
Permitted
Sideyard
Permitted
Rearyard
Permitted
Courtyard
Permitted
Principal Building Setbacks
Front yard primary (g.1)1
40 feet minimum
Front yard secondary (g.2)1 for corner lot
40 feet minimum
Side yard (g.3)1
20 feet minimum
Rear yard (g.4)1
20 feet minimum
Frontage build-out
Not applicable
Accessory Building Setbacks
Front (h.1)1
20 feet minimum + principal bldg. setback
Side yard (h.2)1
10 feet minimum
Rear yard (h.3)1
10 feet minimum
Private Frontages
Common lawn
Not permitted
Porch and fence
Not permitted
Terrace
Permitted
Forecourt
Permitted
Shopfront and awning
Permitted
Gallery
Permitted
Arcade
Permitted
Civic Spaces
Park
Permitted
Green
Permitted
Square
Permitted
Plaza
Permitted
Playground
Permitted
NOTES:
1 See § 320-12C.
C. 
SD-2 building configuration, height and setbacks.
BUILDING CONFIGURATION
1. Building height shall be measured from the average elevation of the finished grade along the front of the building to the mean elevation of the roof surface.
2. Stories may not exceed 14 feet in height from finished floor to finished ceiling, except for a first-floor commercial function which must be a minimum of 11 feet with a maximum of 24 feet.
320 SD2 Building 1.tif
SETBACKS — PRINCIPAL BLDG
1. The facades and elevations of principal buildings shall be distanced from the lot lines as shown.
2. Facades shall be built along the principal frontage to the minimum specified width in the table.
320 SD2 Building 2.tif
SETBACKS — OUTBUILDINGS
1. The elevation of the outbuilding shall be distanced from the lot lines as shown.
320 SD2 Building 3.tif
PARKING PLACEMENT
1. Uncovered parking spaces may be provided within the third layer as shown in the diagram.
2. Covered parking shall be provided within the third layer as shown in the diagram. Side-or rear-entry garages may be allowed in the first or second layer at the discretion of the Planning Board.
3. Trash containers shall be stored within the third layer.
320 SD2 Building 4.tif