Newton City Zoning Code
§ 320-13 Special District 3
Retail/Manufacturing Zone.
 |
A.
SD-3 purpose. Special District 3: Retail/Manufacturing Zone covers the area along US Route 206 at its intersection with North and South Park Drive. This area includes existing large-scale retail and industrial uses. The area may be a location for relocated light manufacturing and industrial uses which currently exist in redevelopment areas. The following building types are permitted in the District:
B.
SD-3 bulk requirements.
Building Configuration | Principal building | 4 stories/50 feet maximum; 2 story min. facade |
Accessory building | 2 stories/25 feet maximum | |
Lot Occupation | Lot width | 50 feet minimum |
Lot coverage | 70% maximum | |
Building Disposition (§ 320-26B) | Edgeyard | Permitted |
Sideyard | Permitted | |
Rearyard | Permitted | |
Courtyard | Permitted | |
Principal Building Setbacks | Front yard primary (g.1)1 | 6 feet minimum, 18 feet maximum |
Front yard secondary (g.2)1 for corner lot | 6 feet minimum, 18 feet maximum | |
Side yard (g.3)1 | 10 feet minimum | |
Rear yard (g.4)1 | 3 feet minimum | |
Frontage build-out | 50% minimum at setback | |
Accessory Building Setbacks | Front (h.1)1 | 20 feet minimum + bldg. setback |
Side yard (h.2)1 | 5 feet minimum or 10 feet at corner | |
Rear yard (h.3)1 | 5 feet minimum | |
Private Frontages (§ 320-26A) | Common lawn | N/A |
Porch and fence | N/A | |
Terrace | N/A | |
Forecourt | Permitted | |
Shopfront and awning | Permitted | |
Gallery | Permitted | |
Arcade | Permitted | |
Civic Spaces (§ 320-26C) | Park | Permitted |
Green | Permitted | |
Square | Permitted | |
Plaza | Permitted | |
Playground | Permitted |
NOTES: 1 See § 320-13C. |
C.
SD-3 building configuration, height and setbacks.
BUILDING CONFIGURATION 1. Building height shall be measured from the average elevation of the finished grade along the front of the building to the mean elevation of the roof surface. 2. Stories may not exceed 14 feet in height from finished floor to finished ceiling, except for a first-floor commercial function which must be a minimum of 11 feet with a maximum of 24 feet. |  |
SETBACKS — PRINCIPAL BLDG 1. The facades and elevations of principal buildings shall be distanced from the lot lines as shown. 2. Facades shall be built along the principal frontage to the minimum specified width in the table. |  |
SETBACKS — OUTBUILDINGS 1. The elevation of the outbuilding shall be distanced from the lot lines as shown. |  |
PARKING PLACEMENT 1. Uncovered parking spaces may be provided within the third layer as shown in the diagram. 2. Covered parking shall be provided within the third layer as shown in the diagram. Side-or rear-entry garages may be allowed in the first or second layer at the discretion of the Planning Board. 3. Trash containers shall be stored within the third layer. |  |