The purpose of the commercial zones is to provide places in the municipality for a wide range of commercial and retail trades and uses, offices, business and professional services, and other uses that contribute to the economic stability of the community and wellbeing of its employees and residents. The zones intend to provide employment opportunities and expand the municipal tax base, while also encouraging sustainable development and providing an attractive transition between residential and non-residential uses.

1. In order to anticipate and respond to the changing needs of our community and implement commercial node concepts included in the adopted General Plan, the following zones are established:
   1. C-1 Commercial Zone. The C-1 Zone is intended to provide for a wide range of commercial uses designed to serve neighborhood, community, and regional needs. Uses may be freestanding or integrated in a center. Development will be orientation to the street to encourage a pedestrian relationship and buildings will be placed to allow interconnected walkways and shared site accesses, as applicable, for increased convenience, accessibility, and enhanced safety for pedestrians. Development will include elements and façades at the pedestrian level and shall achieve a sense of human scale and create visual interest at eye-level.
   2. C-2 Commercial Zone. The C-2 Zone is intended to provide retail uses, service-oriented businesses, offices, and restaurants in an integrated center. Each center shares common architecture, access, parking, signage, and landscape design. Centers will typically include three (3) or more acres and provide regional or community-level destination shopping while incorporating a design which enhances pedestrian orientation within the center.
      

1. Schedule of Permitted Uses. The specific uses listed in the following schedule are permitted in the zones as indicated, subject to the general provisions, special conditions, additional restrictions, and exceptions set forth in this Title. Special use conditions can be found in Chapter 19.42 Specific Use Standards for permanent uses and Chapter 19.44 for temporary uses.
2. Procedure for Multiple Uses (Combination of Uses). If a development proposal involves a combination of uses other than accessory uses as identified in Table 19.32.030, the more restrictive provisions of this Title shall apply. For example, if a portion of a development is subject to conditional use (“C”) approval and the other portion is subject only to permitted use (“P”) review, the entire development shall be reviewed and approved by the conditional use process.
3. Abbreviations. The abbreviations used in the schedule mean:
   1. P = Permitted Use. This use is allowed in the zone but may be subject to additional restrictions and approval processes as provided in this Title.
   2. C = Conditional Use. This use is conditional because of the unique characteristics or potential impacts on the municipality, surrounding neighbors, or adjacent uses, incompatibility in some areas of the zone, or compatibility only if special provisions or conditions are required to mitigate the detrimental impacts of the use. The Planning Commission is the land use authority for uses with this designation.
   3. X = Prohibited Use. This use is prohibited in this zone. Any use not specifically identified in Table 19.32.030 is prohibited in this zone.
      
      

      Table 19.32.030 – Schedule of Permitted Uses
      Use Categories:
      RETAIL AND SERVICE:	C-1	C-2
      Child Care Center	P	P
      Commercial Plant Nursery	P	P
      Financial Institution	P	P
      Laundry Cleaning, Automatic Self-Help and/or Drop Off	P	P
      Personal Care Services	P	P
      Personal Instruction Services	P	P
      Retail and Service Commercial	P	P
      Retail Shops or Galleries if Primary Product is Produced On-Site	P	P
      FOOD AND DRINK:	C-1	C-2
      Food truck / mobile restaurant / food cart	P	P
      Restaurant, Fast Food	P	P
      Restaurant, Sit-Down with or Without Alcohol	P	P
      LODGING:	C-1	C-2
      Bed and Breakfast Inn	X	P
      Hotel/Motel	X	X
      OFFICE:	C-1	C-2
      Office, General	P	P
      Office, Intensive	P	P
      Office, Medical	P	P
      RECREATIONAL:	C-1	C-2
      Athletic Clubs	X	P
      Commercial Recreation	P	P
      Recreation Facility, Commercial	P	P
      Recreation Facility, Public	P	P
      Theatres and Concert Halls (Indoor)	X	P
      INSTITUTIONAL USES:	C-1	C-2
      Animal Control or Rescue Facility	X	P
      Animal Hospital or Clinic	X	P
      Animal Hospital or Clinic with Outdoor Holding Facilities	X	P
      Cemetery	X	C
      Church, Synagogue, Mosque, Temple, Cathedral, or other religious buildings	P	P
      Libraries	P	P
      Parks/Open Space	P	P
      Public Uses	P	P
      Public Utilities, Major	C	C
      Public Utilities, Minor	P	P
      Schools, Public	P	P
      Schools, Private/Charter	C	C
      ACCESSORY USES:	C-1	C-2
      Accessory Outside Storage	X	P
      Home Business, subject to chapter 19.42	P	P
      Household Pets, not including kennels	P	P
      Drive-Thru and Drive-Up Facilities appurtenant to a permitted use	X	X
      Outdoor dining appurtenant to a permitted restaurant use	P	P
      Sidewalk Displays and Sidewalk Cafes appurtenant to a permitted use	P	P
      Temporary buildings, subject to 19.44	P	P
      NONCONFORMING USES:	C-1	C-2
      Pre-Existing Lot	P	P
      Pre-Existing Structure	P	P
      Pre-Existing Use	P	P

Development in the C-1 and C-2 Zones shall comply with the lot and project area standards shown in Table 19.32.040 and all other standards in this Title, as applicable.

The following site standards shall apply in the C-1, and C-2 Zones:

1. Setbacks. Setback standards frame streets spatially and encourage a consistent building wall along street edges. Parking setbacks enhance pedestrian safety and comfort while reducing the visual prominence of automobiles as viewed from streets, building entrances, and sidewalks. See Table 19.32.050 for setback requirements.
   
   

   Table 1 19.32.050 – Bulk and Yard Regulations
   	C-1	C-2
   Front Yard Setback, Arterial or Collector Street	18' landscaped setback from back of sidewalk	30' landscaped setback from public right of way
   Front Yard Setback, Minor Street or Drive	10' landscaped setback from back of curb	15' landscaped setback from back of curb
   Side Yard Setback – Corner Lots	Same as the front yard setback	Same as the front yard setback
   Build to Line	The front yard setback is the build-to-line. At least fifty percent (50%) of the adjacent façade shall be built within three feet (3') of the build-to-line. A side yard, corner lot setback is also a build-to-line.
   Side Yard Setback – Interior Lots	No setback required if sharing a common wall. 8’ setback to property line or 16’ between buildings if building pads are used. 20’ landscape buffer required to separate residential uses from commercial uses.
   Rear Yard Setback	10’ setback to property line or 20’ between buildings if building pads are used. 20’ Landscaped buffer required to separate residential uses from commercial uses.

2. Location and Orientation of Buildings. Structures frame streets spatially by being constructed at the build-to line. Buildings shall be sited to face the street with parking lots on the side or rear. At street or drive intersections the buildings shall be located directly on the corner with parking in the rear. At least fifty percent of the adjacent façade shall be built within three feet of the build-to line.
3. Build-to-Line Exceptions. Some big box developments, such as a grocery stores, may have parking in front, provided other commercial pad sites are proposed along the frontage that would comply with the build-to-line requirements. These pads shall create a forty percent (40%) building street frontage along the width of the project area if combined with public plazas or courtyards.
4. Drive-through windows shall be located at the side or rear of buildings. While not desirable, a single drive aisle may be located between the building and the street so long as its width does not exceed twelve feet (12’), any pedestrian crossings of it are clearly delineated with special paving treatments, no parking spaces occur off of it and a low wall, railing with landscaping, or a continuous hedge at least three feet high exists between stacked cars and the sidewalk. If a drive-through is located between the building and the street, the front setback/build to line is 12’ feet further from the back of sidewalk or public right of way.
5. Sidewalks or Trails. All building front entryways shall have a continuous sidewalk to the street sidewalk. Sidewalks at least six feet (6’) wide are required along the entire front of the lot or project area. A six foot (6’) wide park strip shall be installed between the street and the sidewalk as a pedestrian buffer. No fencing that is parallel to any sidewalk shall be within two feet (2’) of the edge of the sidewalk.
6. Outdoor Dining. If outdoor dining is allowed, the patio or dining area may encroach on up to ten feet (10’) of the required landscaped setback.
7. Utilities. All overhead utilities shall be placed underground unless the applicable utility company deems it to be infeasible.
8. Screening. All garbage dumpsters shall be enclosed by a masonry wall or architectural design with materials that are consistent with the building. The enclosure gate shall be metal and accessible to service vehicles. The enclosure wall and gate shall be a minimum of twelve inches (12”) higher than the trash receptacle bin. Service areas, mechanical equipment, and meters shall be completely screened from the street.
9. Site Furnishings. The developer or builder is responsible for providing site furnishings as required in this document. All site furnishings shall be specified on the plans.
10. twenty thousand square feet (sq. ft.) twenty thousand square feet) Bike Rack. Bike racks shall be provided and installed at a minimum of 3 bike stalls per 50 vehicle parking stalls within each development (minimum of three (3) bike rack stalls). Bike racks should be located near the entrance to the building and visible from the street or drive. Bike racks shall be durable and permanently installed over a hardscape surface.
11. Trash and Recycle Receptacles. Trash and recycle receptacles are required to be provided at a minimum of 1 (both trash and recycle) per public entrance at commercial buildings.
12. Architectural Standards. All new development shall present an attractive, coordinated streetscape, incorporate architectural and site design elements appropriate to a pedestrian scale and provide for the safety and convenience of pedestrians. All new development shall comply with the following architectural standards:
    1. General Design Standards. The following building design requirements shall apply in the C-1 and C-2 Zones:
       1. Walls. No more than three materials shall be used for primary wall surfaces. Exterior finishes shall be of traditional, time- and weather-tested techniques. Retaining and screening walls shall be of materials complementary to the building’s materials. Buildings shall use a cohesive palette of colors which complement nearby buildings. Without limiting the use of color, large areas of wall shall be subdued in color and not reflective. Intense colors should be used as accent only.
       2. Building Stepbacks. Buildings should provide a sense of street enclosure for pedestrians in more urban environments. New commercial buildings adjacent to existing neighborhoods shall step-down in height to help minimize the visual impact to residential areas. See Table 2 19.32.060 for requirements.
       3. Transparency. If applicable, the intent of transparency standards is to promote economic activity by creating active street walls and visual interest for pedestrians at the ground-level. They also serve to promote personal and property safety by introducing more “eyes on the street” or natural surveillance of the public right-of-way and building interiors. See Table 2 19.32.050 for requirements.
          
          

          Table 2 19.32.050. – Building Height and Transparency Standards
          Standard	C-1	C-2
          Building Height	Minimum: No primary building within this district shall be erected to a height less than fifteen feet (15’) above grade. Maximum: 45'	Minimum: No primary building within this district shall be erected to a height less than fifteen feet (15’) above grade. Maximum: 60'
          Step-down Height Adjacent to Residential Areas.	Within one hundred feet (100’) of sites zoned for single family residential, the following standards shall apply: On the portion of the site within one hundred feet (100’) of a site zoned R-1, the maximum height shall be thirty-five feet (35’). On the portion of the site within one hundred feet (100’) of a site zoned R-2, R-4, RM, or RMH the maximum height shall be forty-five feet (45’).
          Transparency	Ground Floor (frontage) 30% Ground Floor (exposed sides) 30% Upper Floors (frontage) 20%	Ground Floor (frontage) 30% Upper Floors (frontage) 20%

       4. Exterior Structure Standards. All exterior walls of all structures shall be constructed in compliance with the following:
       5. Materials. All buildings shall use one or more of the following durable materials as significant finish: architectural precast concrete, architecturally treated concrete masonry units, brick cladding, natural and cast stone, architectural metals, and glazing. Architectural site-cast concrete may be allowed if designed, articulated, and colored for a finished appearance on all buildings. At least fifty percent of all buildings visible from an arterial or collector street shall be composed of brick, stone, architecturally treated CMU, architectural precast concrete, architectural metals, and/or glazing.
       6. Exterior Insulation and Finish System (EIFS)/Stucco. The design and application of EIFS or synthetic stucco are expected to be of a high enough quality to allow for crisp detailing and substantial relief. The use of EIFS on ground floor walls shall be limited to the surface area three feet ’or more above finished grade. The wall area from finished grade to if the use of EIFS begins shall be clad by a hard, durable material such as brick, stone, architectural precast concrete, or architecturally treated concrete masonry units.
       7. Detail and Finish. Building façades that face the street but do not have pedestrian entries shall be composed of high-quality materials such as brick or stone and shall provide variety and interest in the façade through the introduction of such elements as pilasters, recessed or protruding bays, changes in materials and/or colors, building lighting elements, display windows with products or product graphics, transparent windows or clerestories, and well-designed signs and graphics.
       8. Surface Variation. Continuous building wall surfaces shall be relieved with significant variations of wall planes or overhangs that create shadow areas and add visual interest. Variations should result from significant dimensional changes in plane, color, or detail as accomplished by such devices as protruding bays, recessed entries, upper-level step-backs, arcades, offsets in the general plane of the façade, changes in materials or color, bay windows, vestibules, porches, balconies, exterior shading devices, nonretractable canopies or awnings, projecting cornices, or eaves.
       9. Vertical Separation and Human Scale. Buildings in excess of two (2) stories in height shall exhibit architectural detailing that establishes a vertical separation between lower and upper stories. This may be accomplished by a mid-façade cornice or trim, a change in material, style or color, a façade step-back or roof pitch with dormer windows, or other methods. Buildings in excess of two (2) stories shall also exhibit architecture design that incorporates the human scale, which is specific architecture features below 10 feet (10’).
       10. Façade Features. All large retail building façades visible from public streets shall include architectural treatments that add detail, character, and reduce the appearance of massive blank walls. Techniques such as color and material changes, expression of structure, shifts in plane, offsets and projections, belt courses, reveals, pilasters, windows, doors, arcades, canopies, and other similar elements may achieve this standard. Opaque (solid) storefront security closures (rolling doors, etc.) are not allowed.
       11. Entrances. The intent of entrance standards is to provide direct and comfortable access to businesses for pedestrians. Entrances on public streets are particularly important to promote pedestrian traffic and activities on the sidewalks. The following standards apply to the entrances of all structures:
       12. Street front entrances shall be developed on all new buildings. An unobstructed sidewalk connection from the door location shall be provided to connect to the public sidewalk. Entry doors shall be located on the front façade or be placed within three feet (3’) of the front façade.
       13. Primary public entry(s) shall be architecturally emphasized so that pedestrians can easily find them.
       14. Weather protection features such as awnings, canopies, doors inset by at least three feet (3’), or arcades shall be provided at all customer entrances.
       15. Corner Buildings. Special attention shall be given to corner buildings that are highly visible, that may serve as landmarks, and provide a sense of enclosure at intersections. Special attention can be achieved by architecture, landscape, and public space.

In addition to the parking standards specified in Chapter 19.48, Off Street Parking Standards, the following parking standards shall apply:

1. Change Of Use: Changes in use shall follow the standards outlined in Chapter 19.48.
2. Surface parking areas, except for approved street parking, may not be located between a building and a public right-of-way on lots or parcels adjacent to a public right-of-way. This requirement shall only apply to one side of a lot or parcel that is adjacent to a public right-of-way on multiple sides. Surface parking for a big box development, such as a grocery store, that meets the standards for a build-to-line exception as described in Subsection 19.32.050.C, is allowed parking between the building and the right of way as long as the pad sites each comply with this part.
3. Surface parking areas, except for approved street parking, located within thirty feet (30') of a public right-of-way shall be screened by grading, landscaping, walls/fences, or a combination of these, to a height of three feet (3') above the surface of the parking area.
4. All commercial development should be designed to allow for cross-access to adjacent properties to encourage shared parking and shared access points on public or private streets, unless otherwise specified. A minimum distance of one hundred (100) feet should be required between a cross-access way and an entrance. UDOT standards may supersede this requirement in areas of UDOT jurisdiction. If cross-access is deemed impractical by Director on the basis of topography, the presence of natural features, or vehicular safety factors, this requirement may be waived provided that appropriate bicycle and pedestrian connections are provided between adjacent developments or land uses.
5. The Director or designee may approve an exception to the requirements of this Subsection if the Director or designee determines that any of the requirements are not reasonably possible based on the unique characteristics of the site.

1. In addition to the parking standards specified in Chapter 19.50, Landscaping, Screening, and Water Efficiency Standards, the following parking standards shall apply:
   1. Physical Connections. Each lot shall have a system of pedestrian walkways and sidewalks that provide connections between the building entrances, neighboring building entrances, sidewalks, parking areas, open space, and public trails.
   2. Minimum Landscaped Area. Thirteen percent (13%) of the area of each commercial site shall be developed as landscaped setbacks, courtyards, plazas, open space, or walkways.
   3. Landscaped Setback from Edge of a Street or Drive. The entirety of the required setback between a building or parking lot and a street or drive shall consist of landscaping, sidewalks, or a combination thereof. Courtyard or plaza areas shall be deemed to be a part of the front setback of the building.
   4. Prohibitions. Maintenance buildings, trash collection and recycling areas, storage and service areas, mechanical equipment, and off-street loading areas may not be permitted in the front setback of any building and shall be located behind the main building structure, or completely screened from public view.
   5. Building Foundation Landscaping. The ground adjacent to the building foundation shall be landscaped if it is visible from public vantage points.
   6. Residential Buffer. A landscaped buffer shall be required to separate residential uses from commercial and industrial uses.
   7. Fully Sight-Obscuring Fence. The Planning Commission shall require complete visual separation from residential uses if it determines that complete screening is necessary to protect abutting uses, and landscaping is not practical. Such fence shall be a minimum of six feet (6’) high (up to eight feet (8’) if warranted and approved by the Planning Commission) and completely sight-obscuring. Fences may be made of wood, metal, bricks, masonry, or other permanent materials.
      

1. Except for ordinary repairs and maintenance of lighting approved and installed after the adoption of this ordinance all new development shall comply with the following outdoor lighting standards:
2. Light Source. Light sources shall be at least as efficient as LED and no greater than four thousand kelvin (4000K) in correlated color temperature (CCT). Light levels shall be designed such that light trespass measured at the property line does not exceed 0.01 foot-candles. Light fixtures shall use a cutoff luminaire that is fully or partially shielded with no light distributed above the horizontal plane of the luminaire or into nearby residential structures. In no case shall the total lumens emitted for a single site exceed one hundred thousand (1000) lumens per acre.
3. Parking Lot Lighting. Parking lot lighting shall be designed and constructed to comply with the following standards:
4. Pole Height/Design.
   1. Luminaire mounting height is measured from the parking lot or driveway surface and may range from ten feet (10’) to thirty feet (30’), based on review of site plan, proposed land uses, surrounding land uses, parking area size, building mass, topography of site, and impacts on adjacent properties.
   2. Poles and fixtures shall be black, dark brown, or another neutral color approved by the Director or Designee.
   3. All attempts shall be made to place the base of light poles within landscape areas.
   4. Light poles in parking areas may not exceed thirty feet (30’) in height. Poles exceeding twenty feet (20’) in height are appropriate only for parking areas exceeding two hundred (200) stalls and not within 75’ of a residential zone.
5. Other Outdoor Lighting Standards.
   1. Wall-mounted lighting fixtures shall not be located above eighteen feet (18’) in height unless being used as building accent lighting. Fixture styles and finishes shall complement the building exterior.
   2. Lighting located along pedestrian pathways or in areas primarily dedicated to human activity shall be bollard style lighting or down-directed lighting not to exceed twelve feet (12’) in height. Pedestrian lighting shall be coordinated through each project and shall complement adjacent projects to the greatest extent practical.
   3. In order to avoid light pollution, backlit awnings, up-light spotlights, and floodlights are prohibited.
   4. Street lighting shall either be chosen from the city’s approved streetlight list or installed to match a theme set by developments within the zone or neighborhood.
   5. Lighting for outdoor athletic facilities may be mounted on a roof or wall at a height above the typical eighteen-foot (18’) maximum, provided it is demonstrated by the applicant. through submittal of appropriate documentation and light studies, that the facility cannot otherwise be properly lit. This lighting shall comply with the following requirements:
      1. Light fixtures and necessary supports may not extend more than four feet (4’) above the roof line;
      2. Light fixtures shall include appropriate shields to ensure no light trespass off the site;
      3. Light fixtures shall include appropriate shields and louvers to minimize, to the greatest extent possible, any point source light pollution;
      4. Light fixtures and supports shall be painted to blend with the color scheme of the structure to which they are mounted;
      5. Light fixtures shall be dimmable to address any possible unforeseen light impacts once they are constructed and operable; and
      6. The planning commission shall review the hours of light usage and shall approve an appropriate usage schedule depending on the specific situation and impacts on the surrounding area.
6. Upgrading Preexisting Lighting. An applicant shall bring preexisting lighting into compliance with this code upon application with the business license department for a change in ownership, new business in a stand-alone structure or a multi-tenant structure in which the new business utilizes more than fifty percent (50%) of the building square footage on the site, in conjunction with an application for a building permit for any alteration, remodel or expansion of any structure on the site, or in conjunction with changes to the approved site plan.
7. Lighting Plan Submission Requirements. A lighting plan is required for all developments and shall contain the following:
   1. Plans indicating the location on the premises and the type of illumination devices, fixtures, lamps, supports, reflectors, installation and electrical details;
   2. Description of illuminating devices, fixtures, lamps, supports, reflectors, and other devices that may include, but is not limited to, manufacturer catalog cuts and drawings, including a section if required; and photometric data, such as that furnished by manufacturers, or similar showing the angle of the cutoff or light emission; and
   3. A point-by-point light plan to determine the adequacy of the lighting over the site.
      

1. The following standards apply to new development of fences, hedges, and walls:
   1. Required Setbacks. A fence, hedge, wall, column, pier, post, or any similar structure or any combination of such structures is permitted in the required setback of a zone district if it meets the following conditions:
      1. No fence, hedge, or wall extends beyond or across a property line without a recorded agreement with the abutting property owner;
      2. Only one fence or wall shall be allowed per property line. Double fences, walls or combination thereof are prohibited; and
      3. No barbed wire or other sharp, pointed, or electrically charged fence may be erected or maintained, except a temporary fence on a construction site to protect the property during the period of construction may be topped with barbed wire if the barbed wire is not less than eight feet (8’) above the ground and does not extend more than two feet (2’) above the temporary fence.
   2. Height. No fence or wall may exceed seven feet (7’) in height, four feet (4’) in height from the front of the primary structure forward, or three feet (3’) in the sight distance triangle, measured as follows:
      1. In a required yard abutting a street, the total effective height above the finished grade measured on the side nearest the street;
      2. In any other required yard, the total effective height above the finished grade measured on the side nearest the abutting property;
      3. On a property line, measured from the finished grade of either side if the abutting property owners are in agreement; and
      4. A temporary fence on a construction site may be as high as required to protect the property during the period of construction.
   3. Athletic Facilities. Fencing around athletic facilities, including, without limitation, tennis courts, may be fourteen feet (14’) in height so long as all portions above six feet (6’) are constructed with at least fifty percent nonopaque materials.