Zoneomics Logo
search icon

White Settlement City Zoning Code

ARTICLE VI

INDUSTRIAL DISTRICT REGULATIONS

Sec. 111-144.- General provisions.

When a building is erected or structurally altered for any of the uses provided in article V of this chapter in any district in this article, the same shall comply with the minimum yard and off-street parking requirements which would be applicable if the same were situated in a "C-C" corridor commercial district.

(Code 2004, ch. 14, § 24; Code 2008, § 54-144)

Sec. 111-145. - "I-L" light industrial and warehousing district.

(a)

Purpose. The I-L light industrial and warehousing district is a limited industrial classification characterized by warehousing and distribution buildings and operations, and light processing or manufacturing. The regulations of this district are intended to preserve a light industrial nature, particularly with regard to noise, odors, dust, and other noxious conditions.

(b)

Use regulations. Land and structures in this zoning district shall be used according to the regulations for this district as listed in article II of this chapter.

(c)

Height regulations. There shall be no maximum height restrictions in this district.

(d)

Yard regulations.

(1)

The minimum front yard shall be ten feet from the property line.

(2)

There shall be no minimum side yard, except as follows:

a.

On corner lots, the side yard on the street side shall be 15 feet.

b.

On any lot in this district used for industrial purposes which adjoins any residential district, the minimum building line setback adjacent to such residential district shall be 20 feet. Within that 20-foot setback, a ten-foot-wide landscaped bufferyard with no paving, dumpsters or other improvements shall be provided and the screening requirement of section 111-213 shall be complied with. For multistory industrial buildings or structures, the building line setback adjacent to residential property shall be increased five feet for each story more than one.

(3)

There shall be no minimum rear yard in this district.

(e)

Special conditions.

(1)

All manufacturing or industrial uses shall be carried on wholly within buildings or enclosures consisting of substantial screening devices behind the required front yard.

(2)

No raw materials, materials for sale or manufactured products shall be stored outside the confines of buildings or enclosures.

(3)

All buildings hereafter constructed or placed in this district shall have its exterior wall surface constructed of any combination of masonry, glass and/or metal.

(Code 2004, ch. 14, § 25; Code 2008, § 54-145)

Sec. 111-146. - "I-H" heavy industrial district.

(a)

Purpose. The I-H heavy industrial district is intended to accommodate all types of industrial uses and all other uses not prohibited by ordinance.

(b)

Use regulations. Land and structures in this zoning district shall be used according to the regulations for this district as listed in article II of this chapter.

(c)

Height regulations. There shall be no maximum height restrictions in this district.

(d)

Yard regulations.

(1)

The minimum yard abutting a public street shall be ten feet from the property line.

(2)

There shall be no minimum interior side yard in this district.

(3)

On any lot in this district used for industrial purposes which adjoins any residential district, the minimum building line setback adjacent to such residential district shall be 20 feet. Within that 20-foot setback, a ten-foot-wide landscaped buffer yard with no paving, dumpsters or other improvements shall be provided and the screening requirement of section 111-213 shall be complied with. For multistory industrial buildings or structures, the building line setback adjacent to residential property shall be increased five feet for each story more than one.

(4)

There shall be no minimum rear yard in this district.

(e)

Special conditions. All buildings hereafter constructed or placed in this district shall have its exterior wall surface constructed of any combination of masonry, glass and/or metal.

(Code 2004, ch. 14, § 26; Code 2008, § 54-146; Ord. No. 2013-2462, § V, 12-10-2013)

Sec. 111-147. - "I-M" medium industrial district.

(a)

Purpose. The I-M medium industrial district is intended to accommodate all types of industrial uses and all other uses not prohibited by ordinance.

(b)

Use regulations. Land and structures in this zoning district shall be used according to the regulations for this district as listed in article II of this chapter.

(c)

Height regulations. There shall be no maximum height restrictions in this district.

(d)

Yard regulations.

(1)

The minimum yard abutting a public street shall be ten feet from the property line.

(2)

There shall be no minimum interior side yard in this district.

(3)

There shall be no minimum rear yard in this district.

(e)

Special conditions. All buildings hereafter constructed or placed in this district shall have its exterior wall surface constructed of any combination of masonry, glass and/or metal.

(Code 2008, § 54-147; Ord. No. 2013-2462, § VI, 12-10-2013)