Zoneomics Logo
search icon

Yamhill City Zoning Code

CHAPTER 10

44 LUO LIMITED USE OVERLAY ZONE

§ 10.44.010 Purpose.

The purpose of the LUO (Limited Use Overlay) Zone is to reduce the list of permitted uses in a zone to those that are suitable for a particular location. Zones permit a number of uses without notification or opportunity for a hearing. These uses are included in the zone because they are considered basically equivalent in terms of the type and intensity of activity. However, on a particular property certain permitted uses may conflict with adjacent land uses. Rather than reject an otherwise acceptable zone change request because the proposed zone would permit an objectionable use, the limited use overlay can be used to identify the appropriate uses and require a Conditional Use Permit for other uses normally permitted in the zone. It is the intent that the maximum number of acceptable uses be permitted so that the use of the property is not unnecessarily limited.
(Ord. 454 §2, 2000; Ord. 545, 7/9/2025)

§ 10.44.020 Overlay Zone Requirements.

When the Limited Use Overlay Zone is applied, the uses permitted in the underlying zone shall be limited to those permitted uses specifically referenced in the order or ordinance adopting the Limited Use Overlay Zone. Until the overlay zone has been removed or amended, the only permitted uses in the zone shall be those specifically referenced in the adopting ordinance. Uses that would otherwise be permitted may only be allowed if a Conditional Use Permit is approved.
(Ord. 454 §2, 2000)

§ 10.44.030 Procedures and Criteria.

The Limited Use Overlay Zone is applied at the time the underlying zone is being changed. It shall not be necessary to mention in the hearing notice of a re-zoning application that this overlay zone may be applied. The order or ordinance adopting the overlay zone shall include findings to the following:
(A) 
No zone has a list of permitted uses where all uses would be appropriate.
(B) 
The proposed zone is the best suited to accommodate the desired uses.
(C) 
It is necessary to limit the uses permitted in the proposed zone.
(D) 
The maximum number of acceptable uses in the zone have been identified and will be permitted. The order or ordinance adopting the overlay zone shall by section reference, or by name, identify those permitted uses in the zone that will remain permitted uses. A permitted use description may be segmented to require a conditional use for distinct uses that may not be compatible.
(Ord. 454 §2, 2000)

§ 10.44.040 Official Zoning Map.

The official Zoning Map shall be amended to show an LUO suffix on any parcel where the Limited Use Overlay Zone has been applied.
(Ord. 454 §2, 2000)

§ 10.44.050 Site Development Review Requirement.

In addition to limiting the uses in the zone, it may be necessary to require City approval in order to insure the compatibility of the permitted uses within the area. This requirement may be added by specific reference in the adopting order or ordinance of the location of buildings, access, and parking, screening and other site planning considerations. The document shall indicate any special concerns or locational requirements that must be addressed in the Site Development Review and approved by the City.
(Ord. 454 §2, 2000; Ord. 545, 7/9/2025)