Zoneomics Logo
search icon

Jefferson City Zoning Code

CHAPTER 12

28 INDUSTRIAL I DISTRICT STANDARDS

§ 12.28.010 Industrial standards.

Industrial uses shall be in conformance with the provisions outlined in this chapter.
(DC § 6.040)

§ 12.28.020 Lot area.

The minimum lot area in an industrial zone shall be 9,000 square feet.
(DC § 6.040(A))

§ 12.28.030 Lot dimensions.

The minimum lot width in an industrial zone shall be 75 feet. Where an industrial lot fronts upon a cul-de-sac, the minimum frontage along the bulb of the cul-de-sac shall be 40 feet. The minimum lot depth shall be 85 feet.
(DC § 6.040(B))

§ 12.28.040 Setback/yard requirements.

Within the industrial zone the following setbacks shall apply:
A. 
The minimum front yard setback in an industrial zone shall be 20 feet. With the exception of the front eight feet, the front yard may be used for parking. On corner lots, vision clearance shall be maintained in compliance with the Development Code.
B. 
There is no required side yard in an industrial zone with the following exceptions:
1. 
Where an industrial zone abuts a residential district, a 20 foot side yard shall be required;
2. 
Where side yards are created, not adjacent to a residential zone, they shall be a minimum of three feet.
C. 
There is no rear yard required in an industrial zone except where an industrial zone abuts a residential zone; then a 20 foot rear yard is required.
(DC § 6.040(C))