This Chapter lists the land uses that may be allowed within the residential and open space zoning districts established by Section 106.20.020 (Zoning Map and Zoning Districts), determines the type of planning permit/approval required for each use, and provides basic standards for site layout and building size.

The purposes of the individual residential zoning districts and the manner in which they are applied are as follows:

A.

RD-1 through RD-4 (Very Low Density Residential) zoning districts. The RD-1 through RD-4 districts are applied to areas appropriate for large-lots and detached single dwellings, together with hobby farming and keeping of animals, public and quasi-public uses, and similar and compatible uses. The RD-1 through RD-4 zoning districts are consistent with and implement the Very Low Density Residential land use designation of the General Plan.

B.

RD-5 and RD-7 (Low Density Residential) zoning districts. The RD-5 and RD-7 districts are applied to areas appropriate for detached single dwellings, duplexes in specified circumstances, and related, compatible uses. The RD-5 and RD-7 zoning districts are consistent with and implement the Low Density Residential land use designation of the General Plan.

C.

RD-10 through RD-20 (Medium Density Residential) zoning districts. The RD-10 through RD-20 districts are applied to areas appropriate for a variety of housing types, including small-lot single dwellings, and various types of multi-unit housing (for example, duplexes, triplexes, and apartments). The RD-10 through RD-20 zoning districts are consistent with and implement the Medium Density Residential land use designation of the General Plan.

D.

RD-25 and RD-30 (High Density Residential) zoning district. The RD-25 and RD-30 districts are applied to areas appropriate for various types of small-small lot housing products, multi-unit housing, including duplexes, group houses, and apartments. The RD-25 and RD-30 zoning districts are consistent with and implement the High Density Residential land use designation of the General Plan.

E.

MH (Mobile Home) zoning district. The MH district is applied to areas appropriate for mobile home parks and manufactured housing. The MH zoning district is consistent with and implements the Medium Density Residential land use designation of the General Plan.

F.

O (Recreation/Open Space) zoning district. The O zoning district is applied to open space and scenic areas, waterways, and other areas of recreational value to protect the physical, social, recreational, aesthetic, and economic resources of the City. Land uses allowed in the O zoning district will encourage and protect the City's tourist and recreation resources. The O zoning district is consistent with and implements the Open Space and Public land use designations of the General Plan.

(Ord. No. 2018-005, § 1(Exh. 1), 10-11-2018)

A.

General permit requirements. Table 2-2 identifies the uses of land allowed by this Zoning Code in each residential zoning district, and the planning permit required to establish each use, in compliance with Section 106.22.030 (Allowable Land Uses and Permit Requirements).

B.

Permit requirements for certain specific land uses. Where the last column in Table 2-2 ("Specific Use Regulations") includes a section number, the referenced section determines whether the use requires a Zoning Clearance, Minor Use Permit, or Use Permit. The referenced section may also refer to other requirements and standards applicable to the use.

TABLE 2-2

Key to Zone Symbols

Notes:

(1)

See Article 8 for land use definitions.

(Ord. No. 2008-15, § 1, 12-11-2008; Ord. No. 2016-001, § 2, 1-28-2016; Ord. No. 2016-007, § 1, 9-8-2016; Ord. No. 2016-009, § 5, 9-22-2016; Ord. No. 2017-002, § 3(Exh. A-1), 7-13-2017; Ord. No. 2018-005, § 1(Exh. 1), 10-11-2018)

Each subdivision shall comply with the minimum parcel size requirements in Table 2-3. Minimum lot depth shall be determined by the review authority in the subdivision review process. Subdividers are advised that Chapter 106.42 (Standards for Specific Land Uses) may require a specific land use to be on a parcel larger than required by this Section.

TABLE 2-3 MINIMUM PARCEL SIZE STANDARDS

Notes:

(1)

A condominium, townhouse, small lot housing product development or common interest project may be subdivided with smaller parcels for ownership purposes, with the minimum lot area determined through subdivision review, provided that the overall development site complies with the minimum parcel size, and the total number of any dwellings is in compliance with the maximum density for the applicable zone.

(2)

Minimum parcel size requirements for lot types not listed shall be determined by the review authority in the subdivision process.

(3)

Net area is the gross area of the parcel, subtracting any existing or proposed access easements within the parcel, but including drainage and public utility easements.

(Ord. No. 2008-15, § 1, 12-11-2008; Ord. No. 2018-005, § 1(Exh. 1), 10-11-2018)

Each residential development shall not exceed the following maximum residential density (number of dwelling units per acre) requirement for the applicable zoning district, except in compliance with Chapter 106.32 (Affordable Housing Requirements and Incentives).

A.

RD districts.

1.

Maximum density - All RD districts. For a subdivision of five lots or more, the maximum allowable residential density shall be as identified for the applicable residential zoning district on the Zoning Map by the numerical suffix to the "RD" zoning symbol, which expresses the maximum allowable number of dwelling units per gross acre. For example, RD-1 allows a maximum of one dwelling per acre, RD-15 allows a maximum of 15 dwellings per acre, etc. This requirement does not apply to a proposed subdivision of four or fewer lots.

2.

Maximum density - RD-1 through RD-4. No more than one detached single-family dwelling is allowed on a single parcel in the RD-1, 2, 3, and 4 zones, provided that an accessory dwelling unit may also be allowed in compliance with Section 106.42.015 (Accessory Dwelling Units).

3.

Minimum density - RD-20 and above. Within the RD-20 and higher density zoning districts, each proposed residential development shall provide a minimum of 50 percent of the maximum density of the applicable zoning district. For example, a project in the RD-20 zone shall provide a minimum density of 10 units per acre. This standard shall not apply to parcels under two acres in net area prior to subdivision.

B.

MH district.

1.

The maximum allowable residential density within the MH zoning district is established for mobile home parks by Section 106.42.140 (Mobile Homes and Mobile Home Parks).

2.

The maximum residential density for residential uses other than a mobile home park is one dwelling unit per parcel.

C.

O district. The maximum allowable residential density within the O zoning district is one dwelling unit per parcel.

(Ord. No. 2017-002, § 3(Exh. A-1), 7-13-2017; Ord. No. 2018-005, § 1(Exh. 1), 10-11-2018)

Subdivisions, new land uses and structures, and alterations to existing land uses and structures, shall be designed, constructed, and established in compliance with the requirements in Table 2-4, in addition to the applicable standards (e.g., landscaping, parking and loading, etc.) in Article 3 (Site Planning and Project Design Standards) of this Zoning Code.

TABLE 2-4 RESIDENTIAL AND OPEN SPACE DISTRICT DEVELOPMENT STANDARDS