SPECIAL LOT STANDARDS COMBINING DISTRICT B
When the B District is combined with another District, the regulations of the District shall be modified by the following requirements. The B District shall be used in order to make provision more suitable for districts, wherever conditions require.
B3.5; B4; B6; B7; B8; B10; B20; B25; B40; B2.5A; B5A; B10A; B100A; B160A.
Note: Any lot or parcel made substandard in size or average lot width by a rezoning from an A (Agricultural) District to an AB (Agricultural Combining) District shall be deemed to comply with minimum requirements of area or average lot width required herein.
As permitted by the District combined.
As permitted by the District combined.
Lot requirements shall be as set forth in the following Table 2.
Yard requirements shall be as set forth in the following Table 3.
Building height shall the same as the primary district combined with.
Site Plan Review approval is required prior to issuance of any building or construction permit or construction of a fence within this district only if the Planning Director determines that a project materially alters the appearance and character of the property or area or may be incompatible with City policies, standards and guidelines.
Shall be the same as the primary district combined with:
Notes:
* Same as primary district combined with.
** Only applies to non-residential primary uses. The number of residential units shall be determined by the allowable density within the underlying General Plan land use designation.
Notes:
* Same as primary district combined with.
** 40 feet combined, with one side yard not less than 10 feet.
*** Within new subdivisions of ten or more dwellings, one-story dwellings may be as close as ten feet to front and rear property lines as long as there is at least 1,000 square feet of usable open space in the rear yard and garages are at least 20 feet from front property lines.
(Amended by Ordinance 24-01, adopted Jan. 23, 2024)
SPECIAL LOT STANDARDS COMBINING DISTRICT B
When the B District is combined with another District, the regulations of the District shall be modified by the following requirements. The B District shall be used in order to make provision more suitable for districts, wherever conditions require.
B3.5; B4; B6; B7; B8; B10; B20; B25; B40; B2.5A; B5A; B10A; B100A; B160A.
Note: Any lot or parcel made substandard in size or average lot width by a rezoning from an A (Agricultural) District to an AB (Agricultural Combining) District shall be deemed to comply with minimum requirements of area or average lot width required herein.
As permitted by the District combined.
As permitted by the District combined.
Lot requirements shall be as set forth in the following Table 2.
Yard requirements shall be as set forth in the following Table 3.
Building height shall the same as the primary district combined with.
Site Plan Review approval is required prior to issuance of any building or construction permit or construction of a fence within this district only if the Planning Director determines that a project materially alters the appearance and character of the property or area or may be incompatible with City policies, standards and guidelines.
Shall be the same as the primary district combined with:
Notes:
* Same as primary district combined with.
** Only applies to non-residential primary uses. The number of residential units shall be determined by the allowable density within the underlying General Plan land use designation.
Notes:
* Same as primary district combined with.
** 40 feet combined, with one side yard not less than 10 feet.
*** Within new subdivisions of ten or more dwellings, one-story dwellings may be as close as ten feet to front and rear property lines as long as there is at least 1,000 square feet of usable open space in the rear yard and garages are at least 20 feet from front property lines.
(Amended by Ordinance 24-01, adopted Jan. 23, 2024)