Lake Como City Zoning Code
§ 17-13.4
Details of Sketch Plat.
[Ord. No. 90-535]
a.
The submitted sketch plat shall be based on tax map information or some other similarly accurate base and shall be neatly and accurately drawn. The following information shall be included:
1.
The location of that portion which is to be subdivided in relation to the entire tract.
2.
All existing structures and wooded areas within the portion to be subdivided and within 100 feet thereof;
3.
The name of the owner and of all adjoining property owners as disclosed by the most recent municipal tax records;
4.
The tax map sheet, block and lot numbers;
5.
All existing and proposed streets and roads and bodies of water within 200 feet of the subdivision;
6.
All proposed lot lines and existing lot lines proposed to be eliminated;
7.
Building setback lines as specified in this chapter;
8.
The approximate location and approximate width of all existing and proposed utility easements in the area to be subdivided;
9.
Zoning district boundaries affecting the tract;
10.
North arrow;
11.
Scale of plat and date of latest revisions;
12.
Area of the entire tract and area being subdivided to the nearest tenth (1/10) of an acre;
13.
The number of new lots created;
14.
Name and address of owner, subdivider and person preparing plat; and
15.
A key map showing the entire subdivision and its relationship to the surrounding areas at a scale of one inch equals not more than 2,000 feet.
b.
Special details and specifications required of proposed minor subdivision prior to classification. No plat shall be classified as a minor subdivision unless drawn by a professional engineer and/or land surveyor licensed to practice in the State of New Jersey and shall bear the signature, seal and license number and address of the professional engineer and/or land surveyor. The sketch plat shall be based on tax map information or some other similarly accurate base at a scale not less than 50 feet to the inch on one of four standard sizes, namely 8 1/2 inches by 13 inches, 15 by 21 inches, 24 inches by 36 inches, or 30 inches by 42 inches, to enable the entire tract to be shown on one sheet and shall show or include the following information:
1.
Contours as shown on the U.S.G.S. topographic sheets.
2.
Marshes, ponds and land subject to flooding in the subdivision and within 100 feet thereof.
3.
All areas designated as wetlands under the New Jersey Wetlands Act of 1970 (N.J.S.A. 13:0A-1, et seq.) or so state if there are none. No plat shall be classified as a minor subdivision which contains designated "wetlands" unless accompanied by written approval from the New Jersey Department of Environmental Protection, Bureau of Marine Lands Management.
4.
All areas under the jurisdiction of the Coastal Area Facilities Review Act (N.J.S.A. 13:19-21) shall be shown, or it shall be so stated if there are none.