Lake Como City Zoning Code
§ 17-13.8
Final Plat Details.
[Ord. No. 90-535]
a.
Subdivision Plat Details. The final plat shall be prepared at a scale of not less than one inch equals 50 feet in accordance with the New Jersey Map Filing Law (R.S. 46:23-9.9 to 23-9.16) and contain the following information:
1.
Date of submission, name and location of the subdivision, and the name of the owner;
2.
Graphic scale and reference meridian; at least one corner of the subdivision shall be tied to New Jersey Plan Coordinate Data with a description on the plat as to how the bearings were determined, provided a grid coordinate control point is situated within one mile distance from the proposed subdivision.
3.
Tract boundary lines, street rights-of-way lines, street names, easements (and other rights of way), land to be dedicated to public use, lot lines and other site lines, bearings or deflection angles and radii, arcs and center angles for all curves;
4.
Designation of the purpose of any easement of land set aside for public use, and a notation of proposed use on any non-residential sites;
5.
Zoning boundaries and the zoning designation of all adjacent lands;
6.
Block and lot numbers in conformity with existing tax map procedures;
7.
Minimum building setback lines as specified in the development ordinance.
8.
Location and description of monuments set and monuments to be set;
9.
The final plat shall be accompanied by the following documents:
(a)
Certification from the Tax Collector that all taxes, municipal assessments and penalties are paid to date;
(b)
Certification that the applicant is the owner of the land or his properly authorized agent, or that the owner has given consent under an option agreement;
(c)
Cross section and profile drawings of streets as approved by the Borough Engineer; and
(d)
Plans and profiles of storm and sanitary sewers and water mains as approved by the Borough Engineer.