83 WIRELESS TELECOMMUNICATIONS FACILITIES WITHIN THE PUBLIC RIGHT-OF-WAY
Figure 23.83-1 Design Standards and Siting Guidelines | |
|---|---|
Acceptable Examples of Design Integration | |
Antennas mounted below the light fixture is preferred. | Sheathed antennas can be mounted above the light fixture if it furthers the design standards set forth in Ch. 23.83. |
Unsheathed antennas must be mounted below the light fixture. | |
Non-Acceptable Examples of Design Integration | |
Exposed antennas mounted above the light fixture, must be sheathed or mounted below. | Equipment must be underground or pole mounted. Total volume of equipment cannot exceed municipal code standards. |
Exposed cables and equipment are prohibited. | |
Siting Guidelines for Right-of-Way and Public Property Installations | |
|---|---|
1. | Minimum Clearance. Minimum height clearance regulations shall be observed by all components of the installation. |
2. | Alley is Preferred Location. When utility poles are used for these installations and there is a choice of using a pole in the street or in an alley, the alley shall be used. |
3. | No Exposed Cables. All cables shall be concealed within a sleeve between the bottom of the antenna and the mounting bracket. No exposed cables. |
4. | Design. Utility pole installations must utilize minimize visual impacts by utilizing city standards for new poles. |
5. | Blending. The new or replacement poles shall match height, color and material of the original or adjacent poles. |
6. | Panel Antennas. Exterior panel antennas that are not covered by a decorative sheath shall not exceed the height of the pole. |
7. | Distance from Pole. Antennas must be mounted no more than four (4) inches from the pole. |
8. | Landscaping. All disturbed landscape shall be replaced in-kind and areas of bare or disturbed soil must be revegetated in accordance with the City’s Landscape Regulations. |
9. | Hidden Equipment. Equipment should be minimally visible through the use of an underground vault. If this is not feasible, above-ground cabinets must be designed and located in an area with minimal visual impact. |
83 WIRELESS TELECOMMUNICATIONS FACILITIES WITHIN THE PUBLIC RIGHT-OF-WAY
Figure 23.83-1 Design Standards and Siting Guidelines | |
|---|---|
Acceptable Examples of Design Integration | |
Antennas mounted below the light fixture is preferred. | Sheathed antennas can be mounted above the light fixture if it furthers the design standards set forth in Ch. 23.83. |
Unsheathed antennas must be mounted below the light fixture. | |
Non-Acceptable Examples of Design Integration | |
Exposed antennas mounted above the light fixture, must be sheathed or mounted below. | Equipment must be underground or pole mounted. Total volume of equipment cannot exceed municipal code standards. |
Exposed cables and equipment are prohibited. | |
Siting Guidelines for Right-of-Way and Public Property Installations | |
|---|---|
1. | Minimum Clearance. Minimum height clearance regulations shall be observed by all components of the installation. |
2. | Alley is Preferred Location. When utility poles are used for these installations and there is a choice of using a pole in the street or in an alley, the alley shall be used. |
3. | No Exposed Cables. All cables shall be concealed within a sleeve between the bottom of the antenna and the mounting bracket. No exposed cables. |
4. | Design. Utility pole installations must utilize minimize visual impacts by utilizing city standards for new poles. |
5. | Blending. The new or replacement poles shall match height, color and material of the original or adjacent poles. |
6. | Panel Antennas. Exterior panel antennas that are not covered by a decorative sheath shall not exceed the height of the pole. |
7. | Distance from Pole. Antennas must be mounted no more than four (4) inches from the pole. |
8. | Landscaping. All disturbed landscape shall be replaced in-kind and areas of bare or disturbed soil must be revegetated in accordance with the City’s Landscape Regulations. |
9. | Hidden Equipment. Equipment should be minimally visible through the use of an underground vault. If this is not feasible, above-ground cabinets must be designed and located in an area with minimal visual impact. |