(1)

The uses permitted in Planning Areas C-5, D-1, G-2, G-3, G-4, G-6, G-9, G-12, H-1, H-3, H-6, H-10, I-1, I-2, I-3, J-2, J-3, J-5, J-6, J-7, J-8, K-1, K-3, L-2, L-3, M-2, M-3, M-8, and M-9 of Specific Plan No. 303 shall be the same as those uses permitted in Article VIIIe, Section 8.100 of Ordinance No. 348 except that the uses permitted pursuant to Section 8.100.a(1) and (2) and Section b.(1) shall not be permitted. In addition, the permitted uses identified under Section 8.100.a. shall include public parks; community centers; and when the gross acre of a lot is twenty (20) acres or greater, the uses identified under Article XIII, Section 13.1.b. of Ordinance No. 348 shall also be included.

(2)

The development standards for Planning Areas C-5, D-1, G-2, G-3, G-4, G-6, G-9, G-12, H-1, H-3, H-6, H-10, I-1, I-2, I-3, J-2, J-3, J-5, J-6, J-7, J-8, K-1, K-3, L-2, L-3, M-2, M-3, M-8, and M-9 of Specific Plan No. 303 shall be the same as those standards identified in Article VIIIe, Section 8.101 of Ordinance No. 348.

(3)

Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article VIIIe of Ordinance No. 348.

(Ord. No. 348.4897, § 2a, 11-6-2018)

(1)

The uses permitted in Planning Areas A-1, A-3, A-7, E-1, and E-3 of Specific Plan No. 303 shall be the same as those uses permitted in Article VIIIe, Section 8.100 of Ordinance No. 348 except that the uses permitted pursuant to Section 8.100.b.(1) shall not be permitted. In addition, the permitted uses identified under Section 8.100.a. shall include public parks; community centers; facilities related to large scale recreational uses such as a motor sports race track and facilities related thereto, including but not limited to race track, private garages, clubhouse, tuning shop, observation tower, museum, vehicle display areas and ancillary uses in support thereof; and when the gross area of a lot is twenty (20) acres or greater, the uses identified under Article XIII, Section 13.1.b. of Ordinance No. 348 shall also be included.

(2)

The development standards for Planning Areas A-1, A-3, A-7, E-1, and E-3 of Specific Plan No. 303 shall be the same as those standards identified in Article VIIIe., Section 8.101 of Ordinance No. 348.

(3)

If Planning Areas A-1, A-3, A-7, E-1, and E-3 are developed with large scale recreational uses such as a motor sports race track and facilities related thereto, the development standards shall be the same as those identified in Article VIIIe., Section 8.101 of Ordinance No. 348 except that the following development standards shall also apply:

(A)

The minimum front yard setback for any building shall be 20 feet.

(B)

The minimum side yard setback for any building shall be five feet.

(4)

Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article VIIIe of Ordinance No. 348.

(Ord. No. 348.4897, § 2b, 11-6-2018)

(1)

The permitted uses in Planning Areas A-2 of Specific Plan No. 303 shall be the same as those permitted in Article IX, Section 9.1 of Ordinance No. 348, except that the uses permitted pursuant to Sections 9.1.a. (17), (23), (25), (27), (29), (32), (42), (51), (52), (61), (65), (67), (73), and (93); Sections 9.1.b. (7), (9), (11)a., (18), (19), and (20); and Sections 9.1.d. (4), (5), (7), (10), (11), (12) and (13) shall not be permitted. In addition, the permitted uses identified under Section 9.1.a. shall include aviation equipment assembly; communication equipment and microwave sales and installation; computer and office equipment sales, service, repair and assembly; conference facilities; country clubs, manufacture of dairy products, not including dairies; emergency and urgent care medical facilities; libraries; manufacture of grain and bakery products; health and exercise centers; hospitals; ice houses; jewelry manufacture and repair; manufacture of wearing apparel and accessories; manufacture and repair of measuring devices, watches, clocks and related items; manufacture and repair of optical goods, medical instruments, supplies and equipment, engineering, survey and drafting instruments and photography equipment; manufacture of handbags, luggage, footwear, and other personal leather goods; manufacture of cutlery, tableware, hand tools and hardware; manufacture of plumbing and heating items; vehicle storage and impoundment; manufacture of office and computing machines; manufacture, assembly, testing and repair of components, devices, equipment and systems of an electrical, electronic, or electro-mechanical nature; manufacture of non-alcoholic beverages; manufacture of confectionery products; manufacture and repair of refrigeration and heating equipment; printing of periodicals, books, forms, cards and similar items; public parks and public playgrounds; golf courses; religious institutions; facilities for research and development of precision components and products; and water wells and appurtenant facilities.

In addition, the permitted uses identified under Section 9.1.b. shall include aerial service businesses including advertising, photography and tours; aerospace/aeronautical museums; aircraft equipment sales, service and repair; contractor storage yards; flight schools; intermodal cargo transfer facilities; manufacture of furniture and fixtures, including cabinets, partitions and similar small items; manufacture of bicycles; parcel delivery services; warehousing and distribution; facilities related to large scale recreational uses such as golf courses and a motor sports race track and facilities related thereto, including but not limited to race track, private garages, clubhouse, tuning shop, observation tower, museum, vehicle display areas and ancillary uses in support thereof; and when the gross area of a lot is twenty (20) acres or greater, the uses identified under Article XIII, Section 13.1.b. of Ordinance No. 348 shall be included.

In addition, the permitted uses identified under Section 9.1.d. shall include community centers; schools; meat and poultry processing not including slaughtering or rendering of animals; paper shredding facilities; research and manufacture of drugs and pharmaceuticals; manufacture of soaps, cleaners and toiletries; wrought iron fabrication; machine, welding and blacksmith shops; breweries, distilleries and wineries; paper storage and recycling within a building; recycling processing facilities; paper and paperboard mills; manufacture of containers and boxes; and above ground natural gas storage.

(2)

The development standards for Planning Areas A-2 of Specific Plan No. 303 shall be the same as those standards identified in Article IX, Section 9.4 of Ordinance No. 348 except that sports lighting, consisting of exterior nighttime lighting for ballfields, racetracks and other sporting activities, shall not be permitted.

(3)

Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article IX of Ordinance No. 348.

(Ord. No. 348.4897, § 2c, 11-6-2018)

(1)

The uses permitted in Planning Areas C-6, G-8, H-8 and L-1 of Specific Plan No. 303 shall be the same as those uses permitted in Article VII, Section 7.1 of Ordinance No. 348, except that the uses permitted pursuant to Section 7.1.a.(3), (4) and (10); Section 7.1.b(9); and Section 7.1.c(1) shall not be permitted.

In addition, the permitted uses identified under Section 7.1.b. shall include two family dwellings developed pursuant to Subsections AA. through DD. of this section; lakes, including those used for aesthetics, detention, recreation, water skiing, and non-potable irrigation water and noncommercial fishing; water wells and appurtenant facilities; and when the gross area of a lot is twenty (20) acres or greater, the uses identified under Article XIII, Section 13.1.a. and b. of Ordinance No. 348 shall also be included, except that the uses permitted pursuant to Section 13.1.a.(15) shall not be permitted.

(2)

The development standards for Planning Areas C-6, G-8, H-8 and L-1 of Specific Plan No. 303 shall be the same as those standards identified in Article VII, Sections 7.2 through 7.11 except that the development standards set forth in Sections 7.3, 7.4, 7.5, 7.6, and 7.10 shall be deleted and replaced by the following:

A.

Lot area shall be not less than four thousand (4,000) square feet, unless cluster development subject to the development standards set forth in subsections AA. through DD. of this section is utilized. The minimum lot area shall be determined by excluding that portion of a lot that is used solely for access to the portion of a lot used as building site.

B.

The front yard shall be not less than sixteen (16) feet, measured from the existing street line or from any future street line as shown on any Specific Plan of Highways, whichever is nearer the proposed structure.

C.

The minimum average width of that portion of a lot to be used as a building site shall be forty (40) feet, with a minimum average depth of one hundred (100) feet unless cluster development subject to the development standards set forth in subsections AA. through DD. of this section is utilized. "Flag" lots shall not be permitted.

D.

The minimum frontage of a lot shall be forty (40) feet except that lots fronting on knuckles or cul-de-sacs may have a minimum frontage of thirty (30) feet unless cluster development subject to the development standards set forth in subsections AA. through DD. of this section is utilized. Lot frontage along curvilinear streets may be measured at the building setback in accordance with zone development standards.

E.

Side yards on interior and through lots shall be not less than ten (10) percent of the width of the lot, but not less than three feet in width in any event, and need not exceed a width of five feet unless cluster development subject to the development standards set forth in subsections AA. through DD. of this section is utilized. Side yards on corner and reverse corner lots shall be not less than ten (10) feet from the existing street line or from any future street line as shown on any Specific Plan of Highways, whichever is nearer the proposed structure, upon which the main building sides unless cluster development subject to the development standards set forth in subsections AA. through DD. of this section is utilized. Where a zero lot line design is utilized, the alternate side yard shall be not less than ten (10) feet in width.

F.

The rear yard shall not be less than ten (10) feet unless cluster development subject to the development standards set forth in subsection AA. through DD. of this section is utilized.

G.

Every main building erected or structurally altered shall have a lot or building site of not less than one thousand one hundred (1,100) square feet for each dwelling unit in such main building unless cluster development subject to the development standards set forth in subsections AA. through DD. of this section is utilized.

In addition, when a cluster development design is utilized, the following development standards shall be applicable:

AA.

The minimum overall area for each individual unit within a two-family dwelling exclusive of the area set aside for street rights-of-way shall be two thousand (2,000) square feet.

BB.

The minimum lot area for two-family lots used as a residential building site shall be two thousand (2,000) square feet. The minimum lot area shall be determined by excluding that portion of a lot that is used solely for access to the portion of a lot used as a building site. For each two-family dwelling, common open space shall be provided equal to the difference between the lot area for such two-family dwelling and eight thousand (8,000) square feet.

CC.

Side yards on interior and through lots shall be not less than three feet for one-story buildings; not less than ten (10) feet for two-story buildings; and not less than fifteen (15) feet for three-story buildings. Side yards on corner and reversed corner lots shall be not less than ten (10) feet from the existing street line as shown on any Specific Plan of Highways, whichever is nearer the proposed structure, upon which the main building sides, except that where the lot is less than fifty (50) feet wide the yard need not exceed twenty (20) percent of the lot width.

DD.

The rear yard shall not be less than ten (10) feet for one-story buildings; not less than fifteen (15) feet for two-story buildings; and not less than twenty (20) feet for three-story buildings.

(3)

Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article VII of Ordinance No. 348.

(Ord. No. 348.4897, § 2d, 11-6-2018)

(1)

The uses permitted in Planning Areas B-1, B-2, B-5, B-6, C-2, C-4, C-8, F-3, G-7, H-2, H-4, H-5, H-7, M-7B, M-7C, M-7D, and M-7E of Specific Plan No. 303 shall be the same as those uses permitted in Article VII, Section 7.1 of Ordinance No. 348, except that the uses permitted pursuant to Section 7.1.a.(3); Section 7.1.b(9); and 7.1.c(1) shall not be permitted. In addition, the permitted uses identified under Section 7.1.b. shall include two family dwellings developed pursuant to Subsections AA. through FF. of this section; community centers, lakes, including those used for aesthetics, detention, recreation, water skiing, and non-potable irrigation water and non-commercial fishing; water wells and appurtenant facilities; and when the gross area of a lot is twenty (20) acres or greater, the uses identified under Article XIII, Section 13.1.b. of Ordinance No. 348 shall also be included.

(2)

The development standards for Planning Areas B-1, B-2, B-5, B-6, C-2, C-4, C-8, F-3, G-7, H-2, H-4, H-5, H-7, M-7B, M-7C, M-7D, and M-7E of Specific Plan No. 303 shall be the same as those standards identified in Article VII, Sections 7.2 through 7.11, except that the development standards set forth in Sections 7.3, 7.5, 7.6, and 7.11 shall be deleted and replaced by the following:

A.

Lot area shall be not less than five thousand (5,000) square feet, unless cluster development subject to the development standards set forth in subsections AA. through FF. of this section is utilized. The minimum lot area shall be determined by excluding that portion of a lot that is used solely for access to the portion of a lot used as building site.

B.

The minimum average width of that portion of a lot to be used as a building site shall be fifty (50) feet, with a minimum average depth of one hundred (100) feet unless cluster development subject to the development standards set forth in subsections AA. through FF. of this section is utilized. "Flag" lots shall not be permitted.

C.

The minimum frontage of a lot shall be fifty (50') feet except that lots fronting on knuckles or cul-de-sacs may have a minimum frontage of thirty (30) feet unless cluster development subject to the development standards set forth in subsections AA. through FF. of this section is utilized. Lot frontage along curvilinear streets may be measured at the building setback in accordance with zone development standards.

D.

Side yards on interior and through lots shall be not less than ten (10) percent of the width of the lot, but not less than three feet in width in any event, and need not exceed a width of five feet unless cluster development subject to the development standards set forth in subsections AA. through FF. of this section is utilized. A zero lot line design may be used, in which event the alternate side yard shall be not less than ten (10) feet in width. Side yards on corner and reverse corner lots shall be not less than ten (10) feet from the existing street line or from any future street line as shown on any Specific Plan of Highways, whichever is nearer the proposed structure, upon which the main building sides, unless cluster development subject to the development standards set forth in subsections AA. through FF. of this section is utilized.

E.

The rear yard shall not be less than ten (10) feet unless cluster development subject to the development standards set forth in subsections AA. through FF. of this section is utilized.

In addition, when a cluster development design is utilized, for either single-family or two-family dwellings, the following development standards shall be applicable:

AA.

The minimum overall area for each single-family dwelling unit or each individual unit within a two-family dwelling, exclusive of the area set aside for street rights of way shall be four thousand (4,000) square feet.

BB.

The minimum lot area for individual single-family and two-family lots used as a residential building site shall be four thousand (4,000) square feet. The minimum lot area shall be determined by excluding that portion of a lot that is used solely for access to the portion of a lot used as a building site. For each dwelling unit, common open space shall be provided equal to the difference between the single-family or two-family lot area and five thousand (5,000) square feet for each single-family dwelling or ten thousand five hundred (10,500) square feet for each two-family dwelling.

CC.

The minimum average width of that portion of a lot to be used as a building site shall be fifty (50) feet, with a minimum average depth of ninety (90) feet. "Flag" lots shall not be permitted.

DD.

The minimum frontage of a lot shall be fifty (50) feet, except that lots fronting on knuckles or culs-de-sac may have a minimum frontage of thirty (30) feet. Lot frontage along curvilinear streets may be measured at the building setback in accordance with zone development standards.

EE.

Side yards for single-family dwellings on interior and through lots shall be not less than ten (10) percent of the width of the lot, but not less than three feet in width in any event, and need not exceed a width of five feet. Side yards for single-family dwellings on corner and reverse corner lots shall be not less than ten (10) feet from the existing street line or from any future street line as shown on any Specific Plan of Highways, whichever is nearer the proposed structure, upon which the main building sides. Where a zero lot line design is utilized for single-family dwellings, the alternate side yard shall be not less than ten (10) feet in width. Side yards for two-family dwellings on interior and through lots shall be not less than five feet for one-story buildings; not less than ten (10) feet for two-story buildings; and not less than fifteen (15) feet for three-story buildings. Side yards for two-family dwellings on corner and reverse corner lots shall be measured from the existing street line or from any future street line as shown on any Specific Plan of Highways, whichever is nearer the proposed structure, upon which the main building sides.

FF.

The rear yard for single-family dwellings shall be not less than ten (10) feet. The rear yard for two-family dwellings shall be not less than ten (10) feet for one-story buildings, not less than fifteen (15) feet for two-story buildings; and not less than twenty (20) feet for three-story buildings.

(3)

Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article VII of Ordinance No. 348.

(Ord. No. 348.4897, § 2e, 11-6-2018)

(1)

The uses permitted in Planning Areas A-5, G-1 and F-4 of Specific Plan No. 303 shall be the same as those permitted in Article IX, Section 9.1 of Ordinance No. 348, except that the uses permitted pursuant to Sections 9.1.a. (29), (51) and (93), b.(11)a., (12), (18), (19), and (20), d.(2), (3), (4), (5), (6), (9), (10), (11), (12) and (13), shall not be permitted.

In addition, the permitted uses identified under Section 9.1.a. shall include public parks and public playgrounds; golf courses; country clubs; animal hospitals with all kennels entirely indoors; health clubs; computer sales and repair stores; parcel delivery services; libraries; religious institutions; community centers; schools; and water wells and appurtenant facilities.

In addition, when the gross area of a lot is twenty (20) acres or greater, the permitted uses identified under Section 9.1.b. shall include the uses permitted under Article XIII, Section 13.1.b. of Ordinance No. 348.

In addition, the permitted uses identified under Section 9.1.d. shall include electric vehicle charging stations.

(2)

The development standards for Planning Areas A-5, G-1 and F-4 of Specific Plan No. 303 shall be the same as those standards identified in Article IX, Section 9.4 of Ordinance No. 348.

(3)

Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article IX of Ordinance No. 348.

(Ord. No. 348.4897, § 2f, 11-6-2018)

(1)

The uses permitted in Planning Areas B-3, C-1, F-2, G-5, G-10, G-11, G-13, H-9, I-4, I-5, I-6, I-7, I-8, I-9, I-10, I-11, J-1, J-4, M-1A, M-1B, M-1C, M-5A, M-5B, M-6A, M-6B, and M-7A of Specific Plan No. 303 shall be the same as those uses permitted in Article VI, Section 6.1 of Ordinance No. 348, except that the uses permitted pursuant to Section 6.1.b(5); and Section 6.1.c(1). shall not be permitted. In addition, the permitted uses identified under Section 6.1.a. shall include two family dwellings developed pursuant to subsection AA. through GG. of this section; lakes, including those used for aesthetics, detention, recreation, water skiing, and non-potable irrigation water; water wells and appurtenant facilities; and when the gross acre of a lot is twenty (20) acres or greater, the uses identified under Article XIII, Section 13.1.a. and b. of Ordinance No. 348 shall also be included, except that the uses permitted pursuant to Section 13.1.a(15) shall not be permitted.

In addition the permitted uses identified under Section 6.1.b. shall include day care centers; libraries; religious institutions; community centers; and schools.

(2)

The development standards for Planning Areas B-3, C-1, F-2, G-5, G-10, G-11, G-13, H-9, I-4, I-5, I-6, I-7, I-8, I-9,I-10, I-11, J-1, J-4, M-1A, M-1B, M-1C, M-5A, M-5B, M-6A, M-6B, and M-7A of Specific Plan No. 303 shall be the same as those standards identified in Article VI, Section 6.2, except that the development standards set forth in Article VI, Section 6.2.b, c., d., e.(2), e.(3) and g shall be deleted and replaced by the following:

A.

Lot area shall be not less than six thousand (6,000) square feet, unless cluster development subject to the development standards set forth in subsection AA. through GG. of this section is utilized. The minimum lot area shall be determined by excluding that portion of a lot that is used solely for access to the portion of a lot used as building site.

B.

The minimum average width of that portion of a lot to be used as a building site shall be sixty (60) feet, with a minimum average depth of one hundred (100) feet unless cluster development subject to the development standards set forth in subsections AA. through GG. of this section is utilized. "Flag" lots shall not be permitted.

C.

The minimum frontage of a lot shall be sixty (60) feet except that lots fronting on knuckles or cul-de-sacs may have a minimum frontage of thirty-five (35) feet unless cluster development subject to the development standards set forth in subsections AA. through GG. of this section is utilized. Lot frontage along curvilinear streets may be measured at the building setback in accordance with zone development standards.

D.

Side yards on interior and through lots shall be not less than ten (10) percent of the width of the lot, but not less than three feet in width in any event, and need not exceed a width of five feet unless cluster development subject to the development standards set forth in subsection AA. through GG. of this section is utilized. Side yards on corner and reverse corner lots shall be not less than ten (10) feet from the existing street line or from any future street line as shown on any Specific Plan of Highways, whichever is nearer the proposed structure, upon which the main building sides unless cluster development subject to the development standards set forth in subsections AA. through GG. of this section is utilized.

E.

The rear yard shall not be less than ten (10) feet unless cluster development subject to the development standards set forth in subsections AA. through GG. of this section is utilized.

In addition, when a cluster development design is utilized for single-family or two family dwellings, the following development standards shall be applicable:

AA.

The minimum overall area for each single-family dwelling unit or each individual unit within a two-family dwelling, exclusive of the area set aside for street rights of way shall be five thousand (5,000) square feet.

BB.

The minimum lot area for individual single-family lots used as a residential building site shall be five thousand (5,000) square feet. The minimum lot area for two-family lots shall be five thousand five hundred (5,500) square feet. The minimum lot area shall be determined by excluding that portion of a lot that is used solely for access to the portion of a lot used as a building site. For each dwelling unit, common open space shall be provided equal to the difference between the single-family or two-family lot area and six thousand (6,000) square feet for each single-family dwelling or twelve thousand (12,000) square feet for each two-family dwelling.

CC.

The minimum average width of that portion of a lot to be used as a building site shall be fifty-five (55) feet, with a minimum average depth of one hundred (100) feet. "Flag" lots shall not be permitted.

DD.

The minimum frontage of a lot shall be fifty-five (55) feet, except that lots fronting on knuckles or cul-de-sac may have a minimum frontage of thirty (30) feet. Lot frontage along curvilinear streets may be measured at the building setback in accordance with zone development standards.

EE.

Side yards on interior and through lots shall be not less than ten (10) percent of the width of the lot, but not less than three feet in width in any event, and need not exceed a width of five feet. Side yards on corner and reverse corner lots shall be not less than ten (10) from the existing street line or from any future street line as shown on any Specific Plan of Highways, whichever is nearer the proposed structure, upon which the main building sides. Where a zero lot line design is utilized the alternate side yard shall be not less than ten (10) feet in width.

FF.

The rear yard for single-family dwellings shall be not less than ten (10) feet. The rear yard for two-family dwellings shall be not less than ten (10) feet for one-story buildings, not less than fifteen (15) feet for two-story buildings, and not less than twenty (20) feet for three-story buildings.

GG.

In no case shall more than sixty (60) percent of any lot be covered by buildings or structures.

(3)

Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article VI of Ordinance No. 348.

(Ord. No. 348.4897, § 2g, 11-6-2018)

(1)

The uses permitted in Planning Area A-4 of Specific Plan 303 shall be the same as those uses permitted in Article XII, Section 12.2 of Ordinance No. 348, except that the uses permitted pursuant to Section 12.2.c. (3), (7), (11) and (12); Section 12.2.d.; Section 12.2.e., 12.2.f. and 12.2.g. shall not be permitted. In addition, the permitted uses identified under Section 12.2.b. shall include water wells and appurtenant facilities, facilities related to large scale recreational uses such as golf courses and a motor sports race track and facilities related thereto, including but not limited to race track, private garages, clubhouse, tuning shop, observation tower, museum, vehicle display areas, underground fuel storage and ancillary uses in support thereof; and when the gross acre of a lot is twenty (20) acres or greater, the uses identified under Article XIII, Section 13.1.a. and b. of Ordinance No. 348 shall also be included, except that the uses permitted pursuant to Section 13.1.a.(15) shall not be permitted.

In addition, the permitted uses identified under Section 12.2.b shall include aerial services including advertising, photography and tours; aerospace/aeronautical museums; aircraft taxiways; catering services/flight kitchens; conference facilities; golf courses and appurtenant facilities; convenience stores; dry cleaners; flight schools; hospitals; hotels and motels; intermodal cargo transfer terminals; research and development facilities for biomedical, chemical, electronic, mechanical and other scientific purposes; paper recycling facilities; parcel delivery services; and rental car agencies including the storage of rental cars.

In addition, the permitted uses identified under Section 12.2.c. shall include cogeneration plants; structures and facilities necessary and incidental to the development, generation and transmission of electric power and gas such as power plants, booster or conversion plants, transmission lines, pipelines and the like; and incarceration and detention facilities.

(2)

The development standards for Planning Area A-4 of Specific Plan No. 303 shall be the same as those standards identified in Article XII, Section 12.4 of Ordinance No. 348, provided however that Article XII, Section 12,4(b)(3) shall apply only to setbacks calculated from public streets. Article XII, Section 12.4.a. is modified to provide that the minimum lot area shall be seven thousand (7,000) square feet with no minimum average width. There shall be no minimum setback from any private street. Article XII, Section 12.4c.(2) is modified to provide that an observation tower built within Planning Areas A-4 and built as part of a large scale recreational use shall not exceed seventy (70) feet in height and sports lighting, consisting of exterior nighttime lighting for ballfields, racetracks and other sporting activities, shall not be permitted.

(3)

Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article XII of Ordinance No. 348.

(Ord. No. 348.4897, § 2h, 11-6-2018)

(1)

The uses permitted in Planning Areas A-6, E-2 and E-4 of Specific Plan No. 303 shall be the same as those uses permitted in Article IX, Section 9.1a of Ordinance No. 348, except that the uses permitted pursuant to Article IX, Sections 9.1.a. (17), (23), (25), (27), (29), (32), (42), (51), (52), (61), (65), (67), (73), (83), (93) and (96-within Airport Land Use Compatibility Zone C); permitted under Sections 9.1.b. (7), (9), (10), (11.c), (13), (14), (15), (16), (18), (19), and (20); and permitted under Sections 9.1.d. (2), (4), (5), (9), (10), (12), (13), and (16) shall not be permitted; and uses permitted pursuant to Article IX, Section 9.1.a (35) shall not be permitted in Planning Areas E-2 and E-4.

In addition, the permitted uses allowed under Section 9.1.b shall include aerial services including advertising, photography and tours; aerospace/aeronautical museums; aircraft equipment sales, service, and repair; aircraft taxiways; airports; aviation equipment assembly; body and fender shops; building materials and sales yard; building movers storage yard; catering services/flight kitchens; cold storage plant; communications and microwave installations; computer and office equipment sales, service, repair and assembly; conference facilities; contractor storage yards; country clubs; dry cleaners; emergency and urgent care medical facilities; facilities related to large scale recreational uses such as a motor sports race track and facilities related thereto, including but not limited to race track, private garages, clubhouse, tuning shop, observation tower, museum, vehicle display areas, underground fuel storage and ancillary uses in support thereof; flight schools; hardware and home improvement centers; health and exercise centers; heliports; intermodal cargo transfer terminals; libraries -except within Airport Land Use Compatibility Zone C; industrial and manufacturing uses involving food products including beverages, including alcoholic beverages, canning and preserving fruits and vegetables, dairy products-not including dairies, grain and bakery products, ice, meat and poultry products-including meat packing but not slaughtering, sugar and confectionary products, and wineries, distilleries, and breweries; textile products including cotton, wool, and synthetic weaving and finishing mills, wearing apparel and accessory products, knitting mills, floor covering mills, and yard and thread mills; lumber and wood products including saw and planning mills, manufacture of containers and creates, fabrication of wood building structures, lumber yards, manufacture of furniture and fixtures including cabinets, partitions, and similar items; paper products including paper and paperboard mills, manufacture of containers and boxes, paper shredding, printing and publishing of newspaper, periodicals, books, forms cards and similar items, binding of books and other publications; chemicals and related products including manufacture of organic and inorganic compounds-not including those of a hazardous nature, manufacture of drugs and pharmaceuticals, soaps, cleaners, and toiletries, manufacture of agricultural chemicals-not including pesticides and fertilizers, paints and varnishes; rubber and plastic and synthetic products including manufacture of tires and tubes, fabrication of rubber, plastics, and synthetic products; leather products including tanning and finishing of leather, manufacture of handbags, luggage, footwear, and other personal leather goods; stone clay, glass, and concrete products including stone cutting and related activities, pottery and similar items, glass blowing, pressing and cutting, glassware products, manufacture of concrete, gypsum, plaster and mineral products; metal products including manufacture of cans and containers, cutlery, tableware, hand tools and hardware, plumbing and heating items, wrought iron fabrication, manufacture and assembly of fencing, machine, welding, and blacksmith shops, metal stamps and forged metal products, fabrication of metal buildings, manufacture of ordnance and firearms, not including explosives, jewelry; primary metal industries including foundries, rolling and drawing metals, casting metals, blast furnaces, smelting of metals; machinery including engines, turbines, and parts, farm, garden construction, industrial machinery, office and computing machines, manufacture and repair of refrigeration and heating equipment, equipment sales, rental, and storage; electrical equipment including electrical and electronic apparatus and components, appliances, lighting and wiring, radio, television and communications equipment, musical and recording equipment, musical and recording equipment; transportation and related industries including vehicles, aircraft, boats and parts manufacture, railroad equipment, motorcycles, bicycles, and parts, travel trailers and recreational vehicles manufacture, draying, freighting, and trucking operations, railroad yards and stations, vehicle storage and impoundment, trailer and boat storage; engineering of scientific instruments including manufacture and repair of measuring devices, watches, clocks and related items; manufacture and repair of optical goods, medical instruments, supplies and equipment, engineering, survey and drafting instruments and photography equipment; manufacture, assembly, testing and repair of components, devices, equipment and systems of an electrical, electronic, or electro-mechanical nature; manufacture of wearing apparel and accessories; mini warehouses; nurseries and garden supply; outdoor film studio; paper recycling facilities; parcel delivery services; parking lots and parking structures; public parks and public playgrounds; public utility substations and storage yards; recycling of wood, metal and construction wastes; repair of jewelry; research and development facilities for biomedical, chemical, electronic, mechanical and other scientific purposes; research and development facilities for precision components and products; sand blasting; trailer and truck sales and rentals; vehicle and motorcycle repair; water wells and appurtenant facilities; and warehousing and distribution.

In addition, the permitted uses allowed under Section 9.1.d shall include hospitals; abattoirs; above ground natural gas storage less than six thousand (6,000) gallons; acid and abrasives manufacturing; auto wrecking and junk yards; concrete batch plants; cotton ginning; disposal service operations; electric vehicle charging stations; fertilizer production, and processing organic or inorganic; gas, steam, and oil drilling operations; recycling processing facilities; processing and rendering of fats and oils; and sewerage treatment plants.

(2)

The development standards for Planning Areas A-6, E-2, and E-4 of Specific Plan No. 303 shall be the same as those standards identified in Article XII, Section 12.4 of Ordinance No. 348 except those development standards set forth in Article XII, a, b, c(2), and k shall be deleted and replaced by the following:

a.

Lot size. Minimum lot area shall be seven thousand (7,000) square feet with no minimum average width.

b.

Standard setbacks.

1.

Where the front, side, or rear yard adjoins a street, the minimum setback shall be twenty-five (25) feet from any public street.

2.

No minimum setback is required from any private street.

3.

Front yard: No minimum.

4.

Rear yard: No minimum.

5.

Side yard: No minimum.

c.

Height requirements. Buildings shall not exceed fifty (50) feet unless a height up to seventy-five (75) feet is approved pursuant to Article XVIII, Section 18.34. An observation tower built as part of large scale recreational use shall not exceed seventy (70) feet in height.

d.

Lighting. All lighting fixtures, including spot lights, electrical reflectors and other means of illumination for signs, structures, landscaping, parking, loading, unloading and similar areas, shall be focused, directed, and arranged to prevent glare or direct illumination on streets or adjoining property. Sports lighting, consisting of exterior nighttime lighting for ballfields, racetracks, and other sporting activities, shall not be permitted.

(3)

Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article XII of Ordinance No. 348.

(Ord. No. 348.4897, § 2i, 11-6-2018)

(1)

The uses permitted in Planning Areas E-2A and E-2B of Specific Plan No. 303 shall be the same as those uses permitted in Article IX, Section 9.1.a of Ordinance No. 348, except that the uses permitted pursuant to Article IX, Sections 9.1.a. (17), (23), (25), (27), (29), (32), (35), (42), (51), (52), (61), (65), (67), (72), (73), (83), (93) and (96); Sections 9.1.B. (7), (9), (10), (11.a,) (11.b), (11.c), (13), (14), (15), (16), (18), (19), and (20); Sections 9.1.D. (2), (4), (5), (9), (10), (11), (12), (13), and (16); and Sections 9.1.f.1.e. shall not be permitted.

In addition, the permitted uses allowed under Section 9.1.b. shall include aerial services including advertising, photography and tours; aerospace/aeronautical museums; aircraft equipment sales, service, and repair; aircraft taxiways; airports; aviation equipment assembly; building materials and sales yard; building movers storage yard; catering services/flight kitchens; cold storage plant; communications and microwave installations; computer and office equipment sales, service, repair and assembly; contractor storage yards; country clubs; dry cleaners; emergency and urgent care medical facilities; facilities related to large scale recreational uses such as a motor sports race track and facilities related thereto, including but not limited to a race track, racetrack recreational units, private garages, clubhouse, tuning shop, observation tower, museum, vehicle display areas; flight schools; hardware and home improvement centers; health and exercise centers; intermodal cargo transfer terminals; industrial and manufacturing uses involving food products including beverages, including alcoholic beverages, canning and preserving fruits and vegetables, dairy products-not including dairies, grain and bakery products, ice, meat and poultry products-including meat packing but not slaughtering, and sugar and confectionary products; textile products including cotton, wool, and synthetic weaving and finishing mills, wearing apparel and accessory products, knitting mills, floor covering mills, and yard and thread mills; lumber and wood products including saw and planning mills, manufacture of containers and creates, fabrication of wood building structures, lumber yards, manufacture of furniture and fixtures including cabinets, partitions, and similar items; paper products including paper and paperboard mills, manufacture of containers and boxes, paper shredding, printing and publishing of newspaper, periodicals, books, forms cards and similar items, binding of books and other publications; chemicals and related products including manufacture of organic and inorganic compounds-not including those of a hazardous nature, manufacture of drugs and pharmaceuticals, soaps, cleaners, and toiletries, manufacture of agricultural chemicals-not including pesticides and fertilizers, paints and varnishes; rubber and plastic and synthetic products including manufacture of tires and tubes, fabrication of rubber, plastics, and synthetic products; leather products including tanning and finishing of leather, manufacture of handbags, luggage, footwear, and other personal leather goods; stone clay, glass, and concrete products including stone cutting and related activities, pottery and similar items, glass blowing, pressing and cutting, glassware products, manufacture of concrete, gypsum, plaster and mineral products; metal products including manufacture of cans and containers, cutlery, tableware, hand tools and hardware, plumbing and heating items, wrought iron fabrication, manufacture and assembly of fencing, machine, welding, and blacksmith shops, metal stamps and forged metal products, fabrication of metal buildings, manufacture of ordnance and firearms-not including explosives, jewelry; primary metal industries including foundries, rolling and drawing metals, casting metals, blast furnaces, smelting of metals; machinery including engines, turbines, and parts, farm, garden construction, industrial machinery, office and computing machines, manufacture and repair of refrigeration and heating equipment, equipment sales, rental, and storage; electrical equipment including electrical and electronic apparatus and components, appliances, lighting and wiring, radio, television and communications equipment, musical and recording equipment, musical and recording equipment; transportation and related industries including vehicles, aircraft, boats and parts manufacture, railroad equipment, motorcycles, bicycles, and parts, travel trailers and recreational vehicles manufacture, draying, freighting, and trucking operations, railroad yards and stations, vehicle storage and impoundment, trailer and boat storage; engineering of scientific instruments including manufacture and repair of measuring devices, watches, clocks and related items; manufacture and repair of optical goods, medical instruments, supplies and equipment, engineering, survey and drafting instruments and photography equipment; manufacture, assembly, testing and repair of components, devices, equipment and systems of an electrical, electronic, or electro-mechanical nature; manufacture of wearing apparel and accessories; mini warehouses; outdoor film studio; paper recycling facilities; parcel delivery services; parking lots and parking structures; public parks and public playgrounds; public utility substations and storage yards; recycling of wood, metal and construction wastes; repair of jewelry; research and development facilities for biomedical, chemical, electronic, mechanical and other scientific purposes; research and development facilities for precision components and products; sand blasting; vehicle and motorcycle repair; water wells and appurtenant facilities; and warehousing and distribution.

(2)

The development standards for all uses in Planning Areas E-2A and E-2B of Specific Plan No. 303 except racetrack recreational units shall be the same as those standards identified in Article XII, Section 12.4 of Ordinance No. 348, except those development standards set forth in a., b., c.2., c.3., and k. shall be deleted and replaced by the following:

a.

Lot size. Minimum lot area shall be seven thousand (7,000) square feet with no minimum average width.

b.

Standard setbacks.

1.

Where the front, side, or rear yard adjoins a public street, the minimum setback shall be twenty-five (25) feet from the property line.

2.

No minimum setback is required from any private street.

3.

Front yard: No minimum.

4.

Rear yard: No minimum.

5.

Side yard: No minimum.

c.

Height requirements. Buildings shall not exceed fifty (50) feet unless a height up to seventy-five (75) feet is approved pursuant to Ordinance No. 348 Article XVIII, Section 18.34. An observation tower built as part of a large scale recreational use shall not exceed seventy (70) feet in height. All other proposed structures over seventy (70) feet tall must undergo appropriate airspace review. Buildings shall not exceed three aboveground habitable floors.

d.

Lighting. All lighting fixtures, including spot lights, electrical reflectors and other means of illumination for signs, structures, landscaping, parking, loading, unloading and similar areas, shall be focused, directed, and arranged to prevent glare or direct illumination on streets or adjoining property. Sports lighting, consisting of exterior nighttime lighting for ballfields, racetracks, and other sporting activities, shall not be permitted.

(3)

The development standards in Planning Areas E-2A and E-2B of Specific Plan No. 303 for racetrack recreational units shall be the same as those standards identified in Article XII, Section 12.4 of Ordinance No. 348, except those development standards set forth in a, b, c.2., c.3., and k shall be deleted and replaced by the following:

a.

Lot size. Minimum lot area shall be seven thousand (7,000) square feet.

b.

Standard setbacks.

1.

No minimum setback is required from any private street.

2.

Front yard setback shall be a minimum of thirty (30) feet.

3.

Rear yard: No minimum.

4.

Side yard setback shall be a minimum of five feet.

c.

Height requirements. Buildings shall not exceed fifty (50) feet unless a height up to seventy-five (75) feet is approved pursuant to Ordinance No. 348 Article XVIII, Section 18.34. An observation tower built as part of large scale recreational use shall not exceed seventy (70) feet in height. All proposed structures over seventy (70) feet tall must undergo appropriate airspace review. Buildings shall not exceed three aboveground habitable floors.

d.

Lighting. All lighting fixtures, including spot lights, electrical reflectors and other means of illumination for signs, structures, landscaping, parking, loading, unloading and similar areas, shall be focused, directed, and arranged to prevent glare or direct illumination on streets or adjoining property. Sports lighting, consisting of exterior nighttime lighting for ballfields, racetracks, and other sporting activities, shall not be permitted.

In addition, the following development standards shall also apply:

e.

Structures shall provide vehicle storage area on the ground floor of structure.

f.

Vehicular and pedestrian access shall be from common access areas or corridors.

(4)

Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article IX of Ordinance No. 348.

(Ord. No. 348.4897, § 2j, 11-6-2018)

(1)

The uses permitted in Planning Area E-6 of Specific Plan No. 303 shall be the same as those uses permitted in Article IX, Section 9.1 of Ordinance No. 348, except that the uses permitted pursuant to Article IX, Sections 9.1.a. (17), (23), (25), (27), (29), (32), (42), (51), (52), (61), (65), (67), (73), (83), and (93); allowed under Sections 9.1.b. (7), (9), (10), (11.c), (13), (14), (15), (16), (18), (19), and (20); and allowed under Sections 9.1.d. (2), (4), (5), (9), (10), (12), (13), and (16) shall not be permitted.

In addition, the uses identified under Section 9.1.b as allowable with a plot plan shall include aerial services including advertising, photography and tours; aerospace/aeronautical museums; aircraft equipment sales, service, and repair; aircraft taxiways; airports; aviation equipment assembly; body and fender shops; building materials and sales yard; building movers storage yard; catering services/flight kitchens; cold storage plant; communications and microwave installations; computer and office equipment sales, service, repair and assembly; conference facilities; contractor storage yards; country clubs; dry cleaners; emergency and urgent care medical facilities; facilities related to large scale recreational uses such as a motor sports race track and facilities related thereto, including but not limited to race track, private garages, single-family residential including duplex units defined as a structure with two dwelling units placed beside one another sharing a common wall, clubhouse, tuning shop, observation tower, museum, vehicle display areas, underground fuel storage and ancillary uses in support thereof; flight schools; health and exercise centers; intermodal cargo transfer terminals; libraries; industrial and manufacturing uses involving food products including beverages- including alcoholic beverages, canning and preserving of fruits and vegetables, dairy products-not including dairies, grain and bakery products, ice, meat and poultry products-including meat packing but not slaughtering, sugar and confectionary products, and wineries, distilleries, and breweries; textile products including cotton, wool, and synthetic weaving and finishing mills, wearing apparel and accessory products, knitting mills, floor covering mills, and yard and thread mills; lumber and wood products including saw and planning mills, manufacture of containers and creates, fabrication of wood building structures, lumber yards, manufacture of furniture and fixtures including cabinets, partitions, and similar items; paper products including paper and paperboard mills, manufacture of containers and boxes, paper shredding, printing and publishing of newspaper, periodicals, books, forms cards and similar items, binding of books and other publications; chemicals and related products including manufacture of organic and inorganic compounds-not including those of a hazardous nature, manufacture of drugs and pharmaceuticals, soaps, cleaners, and toiletries, manufacture of agricultural chemicals-not including pesticides and fertilizers, paints and varnishes; rubber and plastic and synthetic products including manufacture of tires and tubes, fabrication of rubber, plastics, and synthetic products; leather products including tanning and finishing of leather, manufacture of handbags, luggage, footwear, and other personal leather goods; stone clay, glass, and concrete products including stone cutting and related activities, pottery and similar items, glass blowing, pressing and cutting, glassware products, manufacture of concrete, gypsum, plaster and mineral products; metal products including manufacture of cans and containers, cutlery, tableware, hand tools and hardware, plumbing and heating items, wrought iron fabrication, manufacture and assembly of fencing, machine, welding, and blacksmith shops, metal stamps and forged metal products, fabrication of metal buildings, manufacture of ordnance and firearms, not including explosives, jewelry; primary metal industries including foundries, rolling and drawing metals, casting metals, blast furnaces, smelting of metals; machinery including engines, turbines, and parts, farm, garden construction, industrial machinery, office and computing machines, manufacture and repair of refrigeration and heating equipment, equipment sales, rental, and storage; electrical equipment including electrical and electronic apparatus and components, appliances, lighting and wiring, radio, television and communications equipment, musical and recording equipment, musical and recording equipment; transportation and related industries including vehicles, aircraft, boats and parts manufacture, railroad equipment, motorcycles, bicycles, and parts, travel trailers and recreational vehicles manufacture, draying, freighting, and trucking operations, railroad yards and stations, vehicle storage and impoundment, trailer and boat storage; engineering of scientific instruments including manufacture of wearing apparel and accessories; manufacture and repair of measuring devices, watches, clocks and related items; manufacture and repair of optical goods, medical instruments, supplies and equipment, engineering, survey and drafting instruments and photography equipment; manufacture, assembly, testing and repair of components, devices, equipment and systems of an electrical, electronic, or electro-mechanical nature; mini warehouses; nurseries and garden supply; outdoor film studio; paper recycling facilities; parcel delivery services; parking lots and parking structures; public parks and public playgrounds; public utility substations and storage yards; recycling of wood, metal and construction wastes; repair of jewelry; research and development facilities for biomedical, chemical, electronic, mechanical and other scientific purposes; research and development facilities for precision components and products; sand blasting; trailer and truck sales and rentals; vehicle and motorcycle repair; water wells and appurtenant facilities; and warehousing and distribution.

In addition, the uses conditionally permitted identified under Section 9.1.d shall include hospitals, abattoirs; above ground natural gas storage less than six thousand (6,000) gallons; concrete batch plants; cotton ginning, disposal service operations; electric vehicle charging stations; fertilizer production, and processing organic and inorganic; gas, steam and oil drilling operations; processing and rendering of fats and oils; recycling processing facilities; and sewerage treatment plants.

(2)

The development standards for Planning Area E-6 of Specific Plan No. 303 shall be the same as those standards identified in Article XII, Section 12.4 except those development standards set forth in Article XII, a, b, c(2), and k shall be deleted and replaced by the following:

a.

If residential uses are located contiguous to nonresidential uses, then the following standards shall apply:

1.

Lot size. Minimum lot area shall be seven thousand (7,000) square feet with no minimum average width.

b.

Standard setbacks.

1.

Where the front, side, or rear yard adjoins a street, the minimum setback shall be twenty-five (25) feet from any public street.

2.

No minimum setback is required from any private street.

3.

Front yard: No minimum.

4.

Rear yard: No minimum.

5.

Side yard: No minimum.

c.

Building height. Buildings shall not exceed fifty (50) feet unless a height up to seventy-five (75) feet is approved pursuant to Article XVIII, Section 18.34. An observation tower built within as part of large scale recreational use shall not exceed seventy (70) feet in height.

d.

Lighting. All lighting fixtures, including spot lights, electrical reflectors and other means of illumination for signs, structures, landscaping, parking, loading, unloading and similar areas, shall be focused, directed, and arranged to prevent glare or direct illumination on streets or adjoining property. Sports lighting, consisting of exterior nighttime lighting for ballfields, racetracks, and other sporting activities, shall not be permitted.

(3)

Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article XII of Ordinance No. 348.

(Ord. No. 348.4897, § 2k, 11-6-2018)

(1)

The uses permitted in Planning Areas E-5, E-7 and E-8 of Specific Plan No. 303 shall be the same as those uses permitted in Article IX, Section 9.1 of Ordinance No. 348, except that the uses permitted pursuant except that the uses permitted pursuant to Article IX, Sections 9.1.a. (17), (23), (25), (27), (29), (32), (35), (42), (51), (52), (61), (65), (67), (73), (83), (93), and (96); Sections 9.1.b. (7), (9), (10), (11.a,) (11.b), (11.c), (13), (14), (15), (16), (18), (19), and (20); and Sections 9.1.d. (2), (4), (5), (9), (10), (12), (13), and (16) shall not be permitted.

In addition, the uses identified under Section 9.1.b as allowable with a plot plan shall include aerial services including advertising, photography and tours; aerospace/aeronautical museums; aircraft equipment sales, service, and repair; aircraft taxiways; airports; aviation equipment assembly; body and fender shops; building materials and sales yard; building movers storage yard; catering services/flight kitchens; cold storage plant; communications and microwave installations; computer and office equipment sales, service, repair and assembly; conference facilities; contractor storage yards; country clubs; dry cleaners; emergency and urgent care medical facilities; facilities related to large scale recreational uses such as a motor sports race track and facilities related thereto, including but not limited to race track, private garages, single-family residential including duplex units defined as a structure with two dwelling units placed beside one another sharing a common wall, clubhouse, tuning shop, observation tower, museum, vehicle display areas, underground fuel storage and ancillary uses in support thereof; flight schools; hardware and home improvement centers; health and exercise centers; heliports; intermodal cargo transfer terminals; libraries; industrial and manufacturing uses involving food products including beverages, including alcoholic beverages, canning and preserving fruits and vegetables, dairy products-not including dairies, grain and bakery products, ice, meat and poultry products-including meat packing but not slaughtering, sugar and confectionary products, and wineries, distilleries, and breweries; textile products including cotton, wool, and synthetic weaving and finishing mills, wearing apparel and accessory products, knitting mills, floor covering mills, and yard and thread mills; lumber and wood products including saw and planning mills, manufacture of containers and creates, fabrication of wood building structures, lumber yards, manufacture of furniture and fixtures including cabinets, partitions, and similar items; paper products including paper and paperboard mills, manufacture of containers and boxes, paper shredding, printing and publishing of newspaper, periodicals, books, forms cards and similar items, binding of books and other publications; chemicals and related products including manufacture of organic and inorganic compounds-not including those of a hazardous nature, manufacture of drugs and pharmaceuticals, soaps, cleaners, and toiletries, manufacture of agricultural chemicals-not including pesticides and fertilizers, paints and varnishes; rubber and plastic and synthetic products including manufacture of tires and tubes, fabrication of rubber, plastics, and synthetic products; leather products including tanning and finishing of leather, manufacture of handbags, luggage, footwear, and other personal leather goods; stone clay, glass, and concrete products including stone cutting and related activities, pottery and similar items, glass blowing, pressing and cutting, glassware products, manufacture of concrete, gypsum, plaster and mineral products; metal products including manufacture of cans and containers, cutlery, tableware, hand tools and hardware, plumbing and heating items, wrought iron fabrication, manufacture and assembly of fencing, machine, welding, and blacksmith shops, metal stamps and forged metal products, fabrication of metal buildings, manufacture of ordnance and firearms, not including explosives, jewelry; primary metal industries including foundries, rolling and drawing metals, casting metals, blast furnaces, smelting of metals; machinery including engines, turbines, and parts, farm, garden construction, industrial machinery, office and computing machines, manufacture and repair of refrigeration and heating equipment, equipment sales, rental, and storage; electrical equipment including electrical and electronic apparatus and components, appliances, lighting and wiring, radio, television and communications equipment, musical and recording equipment, musical and recording equipment; transportation and related industries including vehicles, aircraft, boats and parts manufacture, railroad equipment, motorcycles, bicycles, and parts, travel trailers and recreational vehicles manufacture, draying, freighting, and trucking operations, railroad yards and stations, vehicle storage and impoundment, trailer and boat storage; engineering of scientific instruments including manufacture and repair of measuring devices, watches, clocks and related items; manufacture and repair of optical goods, medical instruments, supplies and equipment, engineering, survey and drafting instruments and photography equipment; manufacture, assembly, testing and repair of components, devices, equipment and systems of an electrical, electronic, or electro-mechanical nature; manufacture of wearing apparel and accessories; mini warehouses; nurseries and garden supply; outdoor film studio; paper recycling facilities; parcel delivery services; parking lots and parking structures; public parks and public playgrounds; public utility substations and storage yards; recycling of wood, metal and construction wastes;; repair of jewelry; research and development facilities for biomedical, chemical, electronic, mechanical and other scientific purposes; research and development facilities for precision components and products; sand blasting; trailer and truck sales and rentals; vehicle and motorcycle repair; water wells and appurtenant facilities; and warehousing and distribution.

In addition, the uses conditionally permitted identified under Section 9.1.d shall include hospitals, abattoirs; above ground natural gas storage less than six thousand (6,000) gallons; concrete batch plants; cotton ginning, disposal service operations; electric vehicle charging stations; fertilizer production, and processing organic and inorganic; gas, steam and oil drilling operations; processing and rendering of fats and oils; recycling processing facilities; and sewerage treatment plants.

(2)

The development standards for Planning Areas E-5, E-7 and E-8 of Specific Plan No. 303 shall be the same as those standards identified in Article XII, Section 12.4, except those development standards set forth in Article XII, a, b, c(2) and k shall be deleted and replaced by the following:

a.

If residential uses are located contiguous to nonresidential uses, then the following standards shall apply:

1.

Lot size. Minimum lot area shall be seven thousand (7,000) square feet with no minimum average width.

b.

Standard setbacks.

1.

Where the front, side, or rear yard adjoins a street, the minimum setback shall be twenty-five (25) feet from any public street.

2.

No minimum setback is required from any private street.

3.

Front yard: No minimum.

4.

Rear yard: No minimum.

5.

Side yard: No minimum.

c.

Building height. Buildings shall not exceed fifty (50) feet unless a height up to seventy-five (75) feet is approved pursuant to Article XVIII, Section 18.34. An observation tower built within as part of large scale recreational use shall not exceed seventy (70) feet in height.

d.

Lighting. All lighting fixtures, including spot lights, electrical reflectors and other means of illumination for signs, structures, landscaping, parking, loading, unloading and similar areas, shall be focused, directed, and arranged to prevent glare or direct illumination on streets or adjoining property. Sports lighting, consisting of exterior nighttime lighting for ballfields, racetracks, and other sporting activities, shall not be permitted.

(3)

Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article XII of Ordinance No. 348.

(Ord. No. 348.4897, § 2l, 11-6-2018)

(1)

The uses permitted in Planning Area M-4 of Specific Plan No. 303 shall be the same as those uses permitted in Article VI, Section 6.1 of Ordinance No. 348. In addition, the permitted uses identified under Section 6.1.a. shall include government offices, courthouses, police stations, fire stations, libraries, museums, and public schools.

(2)

The development standards for Planning Area M-4 of Specific Plan No. 303 shall be the same as those standards identified in Article VI, Section 6.2 of Ordinance No. 348.

(3)

Except as provided above, all other zoning requirements shall be the same as those requirements identified in Article XI of Ordinance No. 348.

(Ord. No. 348.4897, § 2m, 11-6-2018)