A topographic map of the lot at a two-foot contour interval with the cross slope identified by measurement of those areas under 8%, eight to 8-15%, 16-25%, and over 26%.

A physical description of the lot which shall include a technical summary of the site characteristics including a soils description and evaluation (i.e., loading-bearing capacity, erodability potential, depth to bedrock, seasonal high water table, etc.); a description of exposed rock if any exists on the lot; and a complete site description of existent vegetation (type, intensity and cover);

Site grading and development data which shall include the type and location of development activity; procedures for grading, excavation, construction access, stockpiling; extent and phasing of construction; and cut and fill operations. The technical descriptions should also include an explanation of mitigating measures that will be employed to conserve and maintain the physical and aesthetic integrity of the lot;

A land forms analysis showing the location and extent of the site's major landforms including the top of cliff, the cliff face, the side slope and the base of the slope. Any exposed cliff face shall be shown on the land forms analysis. The area in each landform category shall be calculated and shown on the land forms analysis.

Such information shall be submitted to the Construction Code Official in connection with the application for a one or two family dwelling and shall be submitted to the Planning Board in connection with all other applications for development.